DIY Hot Tub

Want to create a relaxing oasis in your backyard for less than $1,000? We'll show you with this easy DIY hot tub plan.
By Greg Kossow
June/July 2010
Add to My MSN

You can customize your DIY hot tub setup to your wishes. This backyard design includes a wood-fired heater, a handy storage nook and a small shed for stacking wood.
PHOTO: GREG KOSSOW
Slideshow


Content Tools

Related Content

Turn a Vintage Tub Into an Outdoor Hot Tub

Don't have the budget for a hot tub? Check out how these homeowners saves money and space by plantin...

Go Ahead … Use My Home Urinal

Home urinals are catching on. First found in high-end homes, many people are installing them when bu...

Make a Solar Hot Tub in One Day for $300

If you begin tomorrow, you can be soaking in fresh, 103-degree water by the evening.

Delicious, Nutritious, Ice-Cold Watermelon Cooler

Stephanie Tourles, author and Seven Springs, Pa., FAIR Speaker, shares how to make a delicious, ice-...

I have lived in the Pacific Northwest with its cool, damp winters for more than 20 years, and I always wanted to build a hot tub. I wasn’t interested in one of the popular jetted tubs because their cost is prohibitive, the pump noise and vibration are bothersome, and the chemicals used to keep the water free of bacteria are a turnoff.

The idea of using a stock-watering tank for a DIY hot tub project has been around for a long time, but all of the ones I’d seen were pretty unattractive. I wanted a setup that was nice-looking, easy to use, and economical. My hot tub dreams came together when I discovered a wood-fired spa stove made in Japan by a company called Chofu and imported by Island Hot Tub Co. Depending on how the soaking area is customized, the setup I’ve designed can cost less than $1,000.

Soaking in a Wood-Fired Hot Tub

Unlike a commercially available tub that only requires you to plug it in and set a timer, you’ll be more involved in the operation of your wood-fired soaking tub. The water is not continually kept hot, so each soak needs to be planned a few hours in advance. I find the involvement is part of the attraction. It creates anticipation that starts with building the fire and culminates with climbing into the steamy, relaxing tub.

The Japanese have long recognized the benefits of soaking in hot water to relieve aches and pains and deal with the daily stresses of life. They typically bathe before soaking to avoid dirtying the water and to maximize the number of times the water can be used before it requires changing. Before each soak, I wash up using hot water dipped directly out of my tub. This keeps the water clean and also acclimates me to the water temperature. Traditionally, the Japanese tend to like their water exceptionally hot, but the Consumer Product Safety Commission recommends the water temperature in a hot tub never exceed 104 degrees Fahrenheit. I keep a hose handy to add cold water if necessary.

Heating and Maintaining the Water

The tub I chose holds 100 gallons if filled to the brim. That much water costs about a buck in our town. Fill the tub 3 to 4 inches from the brim, otherwise the water displaced by your body will be lost when you get in. This setup uses considerably less water than commercially available tubs, thus making it more practical to drain the water frequently, keeping it free of bacteria without using toxic chemicals.

With daily use for two people, we replace the water every four days. When the water needs to be changed, you can simply drain it into a garden area. If you want to keep the water longer or are worried about bacteria growth, add about a quarter cup of 35 percent hydrogen peroxide per 100 gallons (wear gloves and safety goggles during handling). Hydrogen peroxide at this strength is sold as a water clarifier in spa stores. It separates into hydrogen and oxygen in the water, and the oxygen is the active ingredient that kills bacteria.

Now’s the time to make a decision about how to heat the water. Chofu offers gas and wood-fired heaters. Both types of stoves use convection to move the water, so no pumps are required, and they both can heat 100 gallons of water in about an hour and a half.

I chose the wood-fired heater because it’s cheaper to operate, uses no fossil fuels, and is one more way of being less dependent on public utilities. Plus, I like the sound and smell of a wood fire.

The wood-fired Chofu heater costs about $750, and you don’t need an electrical connection to operate it. This heater has no automatic thermostat for the water temperature, so there is a bit of a learning curve to achieving the desired temperature. The water is usually ready after you’ve burned two loads of wood in the stove.

Hot Tub Design Considerations

Stock tanks are available in either metal or polyethylene plastic. The metal tanks have vertical walls, making them somewhat less comfortable. I chose a plastic tank made by Rubbermaid — it has a sloped side so it’s comfortable to use. It’s roomy for one person and cozy for two — ideal for you and your sweetie. The tank is nearly indestructible, and has a rolled-over top edge, which is both attractive and comfortable to rest your arms on. There is also a threaded 1-inch drain port at the bottom of the tank. Most farm stores carry stock tanks of this size, with prices starting at about $75.

Don’t forget to consider privacy. Decide how much you need and design your bath area accordingly, considering options such as a fence or a movable screen. The more comfortable and convenient the tub is to use, the more enjoyment you will get out of it.

When choosing the location, also factor in whether the tub will be visible from your house or yard, and whether the setup will be attractive and blend into the landscaping. There should be a place for firewood and kindling next to the stove, and a place to hang your robe or clothing. If you plan to drain the water onto your garden, the tub needs to be at or above the elevation of your garden and needs a valve on the drain.

If you choose a woodstove to heat your tub, keep in mind prevailing winds and, if possible, locate the stove so the smoke path avoids your house. Smoke-filled air may ruin your relaxation time. In my case, where I wanted to locate the stove in my yard put the smoke path directly in the way of the house. Taking a chance, I put it there anyway, and it works fine. Smoke drifts into our patio and outside living area on occasion, but only for a short time immediately after the fire has been started or fresh wood has been added.

If you live in an area prone to freezing, you’ll need to protect your hot tub system. In most climates, the water in the tub itself can handle an extended period of cold weather before it freezes, but take care to ensure the water in the stove and water lines doesn’t freeze. You can easily drain the stove via a drain plug in the back. I insert a rubber cork into the bottom port to the stove. This allows the water to drain from the stove, yet saves the majority of the water in the tub. Insulate the bottom waterline to the stove, as well as any drain hoses. If your area has extended periods of freezing weather, the safest approach is to drain the entire system after each use.

I am thoroughly delighted with my homemade hot tub. My only regret is that I did not build one a long time ago. Enjoy!


Steps to Build a Hot Tub

1. Construct the wooden attachment collar. You will need to create a 2-inch-thick wooden collar around the outside of the tub to which you will eventually attach the vertical siding. Use a rot-resistant wood for the collar, such as cedar or redwood.

Start by measuring the inside width of the tub at the approximate height from the bottom of the tub where the collar will be located (about 8 inches from the bottom), and divide it in half to determine the radius of the curved end.

Next, using the radius, draw a half circle on a piece of plywood, followed by another radius (using the same centerline) 2 inches larger than the first. These two half circles form the inside and outside faces of the wooden collar. Bisect these lines around the curve to form four equal-length pieces.

Now cut 22½-degree angles on each end of four 2-by-4s, making them 12 inches long between the long points of the angle. Place the pieces on top of the drawn curves, butting their ends together and making sure they cover the drawn radius lines. Now redraw the two radius lines onto the 2-by-4s and cut them out using a saber saw or band saw. Glue the straight pieces of collar to the tub in the same manner.

2. Attach the collar and insulate the tub. Glue the wooden collar pieces to the tub using a product called Great Stuff. This foam insulation is normally used to fill gaps around windows and doors, but in this plan it acts as an incredibly effective glue. It’s waterproof, sticks to anything, and is extremely difficult to keep off of yourself, so wear old clothing and protective gloves when using it (it will not come out of clothing). Great Stuff takes a while to set up, so the individual collar pieces will have to be supported in place until it dries (see vertical sections of 2-by-4 in photo, above). When using the adhesive, remember that less is more, because it will expand considerably as it sets up and could easily push the piece being attached out of alignment.

It’s not practical to insulate all surfaces of the tub, but get as many as possible. The best product to use to insulate the tub is solid Styrofoam “blue board” insulation. It comes 1 and 2 inches thick, and you can glue it to the tub using the Great Stuff.

3. Cut and attach the cedar siding. After you’ve glued on as much insulation as you can, apply the cedar siding. I found half-inch-thick cedar fence boards worked wonderfully. They are reasonably priced and usually clear and free of knots. Cut the boards to length and rip them to 1¾-inch widths (the exact width isn’t too important, as long as it’s less than 2 inches). Leave about one-sixteenth inch between the individual boards to allow for expansion. The boards will go up easily on the straight sides, but the curved ends are a bit more work. The combination of the curve and the tilted sides requires the individual boards going around the curved ends to be an eighth-inch wider at the top than the bottom. This will keep them relatively plumb. Adjust this step accordingly if you’re using a different- sized stock tank or a metal tank with straight sides.

Attach the boards by first applying some glue to the top of the tub. After pushing the board up as far as it will go behind the lip, screw it to the wooden collar with a stainless steel screw. Do not use too much adhesive, as it will come out of the cracks between the boards as it cures. In the areas where the hot water lines and the drain are located, leave the boards off until you finish the plumbing installation. The plumbing is minimal, requiring only a valve and a few elbows.

4. Install the stove and make a cover. Hooking up your stove will be one of the last steps, and the directions that come with the stove are great. The only issue that may come up is not having the correct size saw to drill the holes in the tub, but overall, it’s a snap. The chimney installation is straightforward, although the chimney needs to be tied to something for wind support. I located my wood storage structure close to the stove so it could support the chimney.


Previous | 1 | 2 | 3 | 4 | Next






Post a comment below.

 

Benny
4/9/2014 4:43:05 AM
Hi Greg! Great article, enjoyed reading it!!! I only really recommend winterization. To the hot tub, you may add polyurethane insulation. Check it out http://www.badtunnaexpert.se/tillbehor-till-badtunna Glass enforced plastic inner elements of hot tub offer a good opportunity to build exactly such hot tub as you like. Glass enforced plastic inner elements http://www.badtunnaexpert.se/badtunna-for-sjalvbyggare As long as you have the cover on your hot tub, the heat has no where to go and it maintains a nice warm. Internal or outside heaters http://www.badtunnaexpert.se/vedkamin-till-badtunna I hope that's useful :) Benny

vacuum1313
12/15/2010 5:00:03 PM
Many who would like something like this live in climates that freeze! How about addressing how to use in that climate?

Abbey Bend
12/15/2010 10:31:28 AM
A solar heating system is really no different than a wood, electric, gas, or whatever the heat source is, all will work better on hotter days because of the Third law of Thermodynamics. That being said a solar system is easy to build, done properly needs no pump either, and even on hazy days supplies some heating to the water. 100 or so gallons of water are not hard to heat solar. A thermo-siphon does not need to be very tall to work; a small pedestal for the tub, with a lay-down breadbox style heater will work well. Can be made out of a large piece or pieces of Plexiglas or glass, with a black tank or black ABS piping inside a straw bale enclosure. So a solar heating system can be made for under $100.00 without too much trouble. It will be a bit slower but free to run, and will keep the water hot year round. I do like the stirring Oar!

Michael_82
6/18/2010 4:18:17 PM
The issue is that the solar will work better on a hotter day, not a cold day. There is also the issue that draining the solar system, then bleeding the air out when refilling it. If you use a dedicated fluid transfer system, the cost would be an issue as well. Also, this system uses no power, so unless the hot tub is higher than the solar collector, it will need a pump as hot fluid rises.

Steven_21
6/16/2010 11:09:48 AM
why not heat the water with rooftop passive solar and supplement if the water is not hot enough with wood.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.