6 Incredible Facts About Kinetic Log Splitters

Reader Contribution by Grace Campbell

Kinetic technology is the wave of the future when it comes to log splitting. Instead of using hydraulics as most log splitters do, kinetic log splitters use a hefty flywheel system that stores energy from the engine in spinning flywheels, releasing it in one burst to pop through logs with record speed. No waiting for the ram to slowly press its way through a log, and then painstakingly retract itself. Here are some incredible facts about kinetic log splitters:

1. Their full cycle time is as little as 2.5 seconds. How long is the cycle time on your hydraulic splitter? It’s probably somewhere in the 15- to 30-second range. Those seconds add up when you’re splitting cord after cord. With a kinetic log splitter, you can expect a cycle time of 2.5 to 3 seconds, including auto-retract. This makes them about 6 times faster than most hydraulic models.

2. They aren’t measured in terms of tonnage. When you go shopping for a new log splitter, the first thing you probably look for is tonnage. It makes sense; in hydraulic splitters, it’s the best way to assess their power. Kinetic log splitters can’t be accurately measured in terms of tons because the force they produce comes in one quick thrust, instead of a prolonged push. So here at DR, we tell you what hydraulic tonnage our kinetic log splitters could outsplit. For example, the Pro-XL RapidFire kinetic splitter can out split a 34-ton hydraulic.

Comments (0) Join others in the discussion!
    Online Store Logo
    Need Help? Call 1-800-234-3368