Harvesting Rainwater: How to Make a Rain Barrel

From harvesting rainwater in a rain barrel to composting your kitchen and yard waste in a compost bin, you can greatly increase your self-reliance by undertaking a few simple DIY projects.
By Betsy Matheson
May 12, 2011
Add to My MSN

Rainwater that is collected in a rain barrel before it hits the ground is free of many contaminants that water picks up as it filters through soil. This soft, warm (and free) water is perfect for plants, lawns, and many other outdoor applications. DIY Projects for the Self-Sufficient Homeowner provides a step-by-step plan to help you build a rain barrel, as well as many other DIY projects to increase your self-reliance.
COVER: CREATIVE PUBLISHING INTERNATIONAL
Slideshow


Content Tools

Related Content

Protecting Your Rainwater Tank With Painted Bed Sheets

To prevent algae growth deterioration by sun damage to a plastic rainwater tank, cover it with a pai...

Rainwater Hub Offers Efficient Rainwater Harvesting

The Rainwater Hub is an entirely new answer to the limits of traditional downspout diverters and rai...

Filtering Rainwater in a Barrel

A 1909 household-hints book reveals old-time method of filtering rainwater for drinking.

We Still Need To Deal With Drought

Drought has been displaced by winter storms in the headlines, but persistent water shortages are pla...

The following is an excerpt from DIY Projects for the Self-Sufficient Homeowner by Betsy Matheson (Creative Publishing International, 2011). This handy book is your first step toward participating in the fast-growing self-sufficiency movement. Even if you live on a small urban lot, you can take steps to gain a little more control over things you consume using the plans in this book. This excerpt is from Chapter 1, “Collecting Rainwater.” 

Practically everything around your house that requires water loves the natural goodness that’s provided with soft rainwater. When you know how to make a rain barrel, you can begin harvesting rainwater to irrigate your garden or lawn, water your houseplants, or top off swimming pools and hot tubs. A ready supply of rainwater is also a reliable stand-by for emergency use if your primary water supply is interrupted.  

Collecting rainwater runoff in rain barrels can save thousands of gallons of tap water each year. A typical 40-by- 40-foot roof is capable of collecting 1,000 gallons of water from only one inch of rain. A large rainwater collection system that squeezes every drop from your roof can provide most — or sometimes all — of the water used throughout the home, if it’s combined with large cisterns, pumps, and purification processing. 

Sprinkling your lawn and garden can consume as much as 40 percent of the total household water use during the growing season. A simple rain barrel system that limits collected water to outdoor (nonpotable) use only, like the rain barrels described on the following pages, can have a big impact on the self-sufficiency of your home, helping you save on utility expenses and reducing the energy used to process and purify water for your lawn and garden. Some communities now offer subsidies for rain barrel use, offering free or reduced-price barrels and downspout connection kits. Check with your local water authority for more information. Get smart with your water usage, and take advantage of the abundant supply from above.

Rain Barrels 

Rain barrels, either built from scratch or purchased as a kit, are a great way to irrigate a lawn or garden without running up your utilities bill. The most common systems include one or more rain barrels (40 to 80 gallons) positioned below gutter downspouts to collect water runoff from the roof. A hose or drip irrigation line can be connected to spigot valves at the bottom of the rain barrel. You can use a single barrel, or connect several rain barrels in series to collect and dispense even more rainwater. 

Plastic rain barrel kits are available for purchase at many home centers for around $100. If kit prices aren’t for you, a rain barrel is easy to make yourself for a fraction of the price. The most important component to your homemade barrel is the drum you choose. 

Obtaining a Rain Barrel  

Practically any large waterproof container can be used to make a rain barrel. One easily obtained candidate is a trash can, preferably plastic, with a snap-on lid. A standard 32-gallon can will work for a rain barrel, but if you can find a 44-gallon can choose it instead. Although wood barrels are becoming more scarce, you can still get them from wineries. A used 55-gallon barrel can be obtained free or for a small charge from a bulk food supplier. Most 55-gallon barrels today are plastic, but some metal barrels are still floating around. Whatever the material, make sure the barrel did not contain any chemical or compound that could be harmful to plants, animals, or humans. If you don’t know what was in it, don’t use it. Choose a barrel made out of opaque material that lets as little light through as possible, reducing the risk of algae growth. 

A barrelful of water is an appealing breeding ground for mosquitoes and a perfect incubator for algae. Filters and screens over the barrel opening should prevent insect infestation, but for added protection against mosquitoes add one tablespoon of vegetable oil to the water in the barrel. This coats the top surface of the stored water and deprives the larvae of oxygen. 

How to Make a Rain Barrel

Tools and Materials  

  • Barrel or trash can  
  • Drill with spade bit 
  • Jigsaw 
  • Hole saw 
  • Barb fitting with nut for overflow hose 
  • 1 1/2" sump drain hose for overflow 
  • 3⁄4" hose bibb or sillcock 
  • 3⁄4" male pipe coupling 
  • 3⁄4" bushing or bulkhead connector 
  • Channel-type pliers 
  • Fiberglass window screening 
  • Cargo strap with ratchet 
  • Teflon tape 
  • Silicone caulk 
  1. Cut a large opening in the barrel top or lid. Mark the size and shape of your opening — if using a bulk food barrel, mark a large semi-circle in the top of the barrel. If using a plastic garbage can with a lid, mark a 12-inch diameter circle in the center of the lid. Drill a starter hole, and then cut out the shape with a jigsaw (see Image Gallery).
  2. Install the overflow hose. Drill a hole near the top of the barrel for the overflow fitting. Thread the barb fitting into the hole and secure it to the barrel on the inside with the retainer nut and rubber washer (if provided). Slide the overflow hose into the barbed end of the barb elbow until the end of the hose seats against the elbow flange (see Image Gallery).
  3. Drill the access hole for the spigot (either a hose bibb or sillcock, brass or PVC). Tighten the stem of the sillcock onto a threaded coupling inserted into the access hole. Inside the barrel, a rubber washer is slipped onto the coupling end and then a threaded bushing is tightened over the coupling to create a seal. Apply a strip of Teflon tape to all threaded parts before making each connection. Caulk around the spigot with clear silicone caulk.
  4. Screen over the opening in the top of the barrel. Lay a piece of fiberglass insect mesh over the top of the trash can and secure it around the rim with a cargo strap or bungee cord that can be drawn drum-tight. Snap the trash can lid over the top. Once you have installed the rain barrel, periodically remove and clean the mesh.

How to Install a Rain Barrel  

Whether you purchase a rain barrel or make your own from scratch or a kit, how well it meets your needs will depend on where you put it and how it is set up (see Image Gallery). Some rain barrels are temporary holding tanks that store water runoff just long enough to direct it into your yard through a hose and drip irrigation head. Other rain barrels are more of a reservoir that supplies water on-demand by filling up watering cans or buckets. If you plan to use the spigot as the primary means for dispensing water, you’ll want to position the rain barrel well off the ground for easy access (raising your rain barrel has no effect on water pressure). 

In addition to height, other issues surrounding the placement of your rain barrel (or rain barrels) include the need to provide a good base, orientation of the spigot and overflow, the position relative to your downspouts, and how to link more than one rain barrel together. Tip: Wherever possible, locate your rain barrel in a shaded area. Sunlight encourages algae growth, especially in barrels that are partially translucent.

Tools and Materials 

  • Drill/driver 
  • Screwdriver 
  • Hack saw 
  • Rain barrel 
  • Hose & fittings 
  • Base material (pavers) 
  • Downspout adapter and extension 
  • Teflon tape 
  1. Select a location for the barrel under a downspout. Locate your barrel as close to the area you want to irrigate as possible. Make sure the barrel has a stable, level base.
  2. Install the spigot. Some kits may include a second spigot for filling watering cans. Use Teflon tape at all threaded fittings to ensure a tight seal. Connect the overflow tube, and make sure it is pointed away from the foundation.
  3. Cut the downspout to length with a hacksaw. Reconnect the elbow fitting to the downspout using sheet-metal screws. Attach the cover to the top of the rain barrel. Some systems include a cover with porous wire mesh, to which the downspout delivers water. Others include a cover with a sealed connection (next step).
  4. Link the downspout elbow to the rain barrel with a length of flexible downspout extension attached to the elbow and the barrel cover.
  5. Variation: If your barrel comes with a downspout adapter, cut away a segment of downspout and insert the adapter so it diverts water into the barrel.
  6. Connect a drip irrigation tube or garden hose to the spigot. A Y-fitting will let you feed the drip irrigation system through a garden hose when the rain barrel is empty. 
  7. If you want, increase water storage by connecting two or more rain barrels together with a linking kit, available from many kit suppliers.

Reprinted with permission from DIY Projects for the Self-Sufficient Homeowner, published by Creative Publishing International, 2011. 


Previous | 1 | 2 | 3 | Next






Post a comment below.

 

jwood
6/10/2014 12:37:49 PM
I purchased containers which had been filled with sealant solution for treatment of new concrete. Reputedly, they can be cleaned by washing the plastic-product out with plain water. Will this be likely to be safe for use in a quasi-organic garden? What about for human intake?

jonny123
4/5/2014 2:51:08 PM
Thank you for posting the tutorial. I have built a lot of rain barrels myself, and i used to use a design similar to this one. However, when the downspout is routed directly into the top of the barrel like that, often times an 1.5" overflow is not sufficient to prevent overflow and/or pooling around the foundation. Forgive the plug, but have you seen the DIY construction kit for rain barrels offered by the "rain brothers"? it definitely simplifies some aspects of making a rain barrel. their website is www.rainbrothers.com -- check it out. it's, so far, been the easiest way i've seen to build a rain barrel. thanks again!

Sharon Berry
4/17/2013 6:23:18 PM
I want to use collected rainwater to water my garden only. Must I use a food-grade collector for this purpose?

bubba_berr
4/17/2013 6:15:47 PM
bubba_berr If the collected rainwater s used only to water garden plants, is it necessary to use food-grade collectors?

shirley bradbury
5/29/2011 7:43:28 PM
Be cautious - check your state and local laws first. In Colorado it is actually AGAINST THE LAW! to collect rainwater. Can you imagine? So, don't put your rain barrels out in plain view, and don't tell your neighbors what you're doing. If your state has a law against rain collection, don't post identifying info on web sites when you share your ideas and experiences. There's no point in being hassled more than necessary :-)

oilcrash dot com
5/28/2011 5:12:05 PM
Bill T It takes about 600 litres to wash a roof, anything less is a joke. BENEFITS of a system like the Tank Vac • Much, much, cleaner and clearer water • Oxygen levels in the water can double • Extended filter life • Low - zero levels of micro-organisms • Water will not be tinted or tainted • No odours • Rapid, simple installation • No moving parts • Installed into either empty or full tanks. Lasts the lifetime of your tank. Saves hundreds of dollars by not needing your tank cleaned. Sorry to sound like a sales man, but this is a good system, how else do you tell people?

oilcrash dot com
5/28/2011 5:01:40 PM
Keeping your rain water clean is important, this looks like the best system to do so. www.tankvac.co.nz

Bill T
5/19/2011 10:17:07 PM
A couple of improvements for better water would be (1) a "roof washer" which takes the first dirty roof water before water enters the barrel, and (2) debris diverter / mosquito excluder which can be similar to those for roof gutters. Ideas are found on the web.

Michael_82
5/18/2011 8:11:05 PM
Our home owner association does not allow them, so I plan on using a 6 or 8 inch pipe at each down spout set slightly higher than the barrels height.Then I will be connecting them at the bottom to the barrels behind the house with 2 inch diameter plastic tubing. Home Depot sells a decent pump for well under $100. All we will have to do is flip a switch to turn on the pump for a few minutes to water the garden.

B Knight
5/18/2011 2:49:07 PM
I have 4 rain barrels, hooked up in pairs of two, which I use for the veggie gardens and a bit of the lawn. Very easy to do. Here's pictures of the assembly: http://greenterrafirma.com/DIY_Rain_Barrel.html You can also see the small pump I use for emptying the water. Picked up the pump at our local Home Depot.

craiginoxford
5/18/2011 12:12:43 PM
I never even thought of what Greenmm_4 said about food grade plastic. I got my two Barrles from a company who shoots expanding foam into houses for insulation. The products they use are green and arent dangerous to an extent i guess.. i have scrubbed and washed the barrels like crazy but Im not going to use them for the veggie garden now.. lol

Karen Joyce
5/18/2011 12:09:40 PM
Wow! I really appreciate this article! I need to add rain barrels to my property and needed a clear explanation of how to do it. Problem solved!!! I do have a question, though. Is there a way to filter water that is 1) collected off an asphalt roof and 2) collected into a plastic garbage can, so that it is potable?

Pittsfield Wino
5/18/2011 11:37:09 AM
I've been using rain barrels for a few years now and I'd like to add a couple different uses for them.While I do use them for watering my gardens,I also use them for filling my pool in the spring.Last year was a little dry for us and my neighbor has a 20 foot well,he ran out of water for about 3 months.Luckily he had a 250 water container on a trailer so we decided to hook it up to my rain barrel hose,and we managed to successfully fill it many times for him. When full,we drove it over to his well and drained it into his well,He told me it would last about a day or two.Our best rain storm we were able to do 850 gallons in about 10 hours. How thats for being neighborly ?

Concetta Hurlbert
5/18/2011 9:19:28 AM
This is a super-easy project for anyone with minimal skills. We have 3 rain barrels connected and set up with soaker hoses; incredible investment for maximum benefit. One word of caution, however, on using a garbage can for the barrel. While inexpensive and easy to find, garbage cans are not food grade plastic. This is important to keep in mind if you will be using the water for edibles. The chemicals in the cans will leach into the water, especially during the heat of summer. We got our rain barrels from a local family restaurant who had cooking wine delivered in 55-gallon food-grade plastic drums. They were happy to have them taken off their hands and we are now assured that our rainwater is safer.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.