Choose a Fireplace for Beauty and Warmth
Learn why EPA-certified, high-efficiency fireplaces burn more efficiently with less air pollution than conventional masonry fireplaces, steel heat forms, radiant fireplaces or "zero-clearance" factory-built fireplaces.
October/November 2003
By John Gulland
 |
An EPA-certified Selkirk model HE-40 high-efficiency fireplace.
Courtesy Selkirk
|
The classic fireplace, with a blazing fire open to the room, is a traditional symbol of comfort and security. Many people include a fireplace among their "must have" features when planning for their dream home. On a more practical level, an open fireplace is notoriously inefficient as a means of heating a room. Its appetite for air, to keep smoke from the fire going up the chimney instead of out into the room, is what causes the inefficiency.
RELATED CONTENT
An indoor pool with this system can actually pay for itself in reduced utility bills, including wir...
Research into a new heat pump that works with solar energy....
Fireplace designs, energy efficiency and the inner operatings of attractive home cooking and warmin...
After 1,500 miles of alternative fuels vehicle driving, we found that you can run a truck with a wo...
Almost half the world’s original forests have disappeared, one-fifth since the late 1950s....
But lots of people, including many who already heat their homes with a woodstove, probably would consider a fireplace instead—if they could find one that would do the job efficiently. The enduring popularity of fireplaces combined with the choice many of us make to use renewable wood heat for our homes has prompted a number of changes in traditional fireplace design that attempt to address the inefficiency problem.
To be an effective heater, a fireplace must borrow some of the features perfected by woodstove designers over the last 20 years. These include gasketed, ceramic glass doors with an airwash system to keep them clean; firebox insulation and internal baffling. An adjustable combustion air supply also is needed to control the burn rate and, therefore, the output of heat.
Some fireplaces with all these features are on the market. The quick way to find them is to look for either factory-built fireplaces or fireplace inserts that are certified by the Environmental Protection Agency (EPA) as meeting the EPA smoke emission standards, which stipulate acceptable concentrations of air polluting emissions from freestanding woodstoves and fireplace inserts.
In designing these fireplaces to burn efficiently enough to meet the standards, the manufacturers have produced some beautiful units that also are able to provide significant heat to your home.
Here's what you need to know to sift through the product specifications, sales advice and marketing hype to choose a unit that will match your personal heating and decor goals.
OPEN FIREPLACES
Open fireplaces commonly found in North American homes today fit into one of four general structural categories:
Conventional masonry. The standard traditional fireplace, this style is built of brick, block or stone by bricklayers following building code rules, without reference to any specific design criteria. It has a deep, squarish firebox that tends to trap radiant heat in the masonry and allow excess air to flush the heat up the chimney. The efficiency of all other fireplaces is compared to this most-common and least-efficient design.
Steel heat form. Popularly called heatilators (after a major manufacturer of this kind of fireplace), steel heat forms consist of a firebox and often a heat exchanger around which masonry fireplaces can be built.
Page: 1 |
2 |
3 |
4 |
5 |
6 |
Next >>
