Learn How to Build a Handmade Casket

Learn how to build a handmade casket for a green funeral, includes step-by-step instructions, a plywood primer and detailed diagrams in the image gallery.
By Steve Maxwell
April/May 2003
Add to My MSN

This handmade casket made at home is beautiful and inexpensive.
PHOTO: STEVE MAXWELL
Slideshow


Content Tools

Related Content

Terrific Toys for Tots, Toddlers and Teens

Make these old time wooden toys for the youngsters in your life this holiday season.

Making Yogurt: A Great First Project for Homesteaders

Making your own yogurt is an excellent project for beginning homesteaders.

Weekend Project: Pretty Vases in 60 Seconds

Wrap drinking glasses in handmade paper for pretty, easy-to-make vases and votive holders.

Greening Your Holiday Season

Helpful tips on keeping earth stewardship alive this holiday season.

Find out how to build a handmade casket using inexpensive wood for a low-cost, earth-friendly funeral.

Handmade Caskets

Make a Handmade Casket Using Air-Dried Lumber

Back in 1995, I attended the funeral of a well-loved gentleman who spent his 85-plus years living in the same modest country home where he grew up. He was a craftsman, skilled with wood, stone and soil, frugal as old-timers often are and simple in his tastes. But when I went to pay my last respects, I thought I'd somehow walked into the wrong funeral parlor. His coffin was huge, streamlined, made of shiny blue fiberglass and sporting more-than-ample fake gold hardware. It looked like something designed in a NASA wind tunnel. I learned later that this space-pod-to-eternity had cost $5,000, and that was the biggest shock of all. I couldn't have been any more surprised if my old friend had leaped out of the coffin wearing a silver jumpsuit and sequined go-go boots.

But coffins don't have to contradict the life of the person whose body they contain. You can make a wooden coffin yourself (or hire a woodworker) — it’s really very easy. Besides saving a bundle of money, making a coffin can reflect and celebrate the life of a specific person, providing a reminder of happy things at a time when sadness holds the upper hand. The best coffins are joyful epitaphs in wood. Several coffin plans exist in the image gallery to help get you started on making a homemade casket.

Advanced woodworkers may want to build a coffin from solid wood, and the drawings in the image gallery show you how to proceed. But if you don't have the tools or advanced skills to build the solid wood casket, you can use hardwood veneer plywood, following the same coffin plans. Regardless of the approach you choose, building a coffin is engaging, well within the reach of those with moderate skills, and a great way to be reminded of the need to live well now. Take it from me, there's nothing like building your own casket to be powerfully reminded of your own mortality.

I'm focusing on coffin plans with hardwood veneered plywood for two reasons. First, it makes this project easier than using solid wood, opening the handmade coffin option to more people. It also eliminates the need for equipment-intensive operations like milling and edge-gluing, while making the most frugal use of high-grade hardwood forest resources. Veneered plywood also is widely available and economical compared to many sources of solid wood.

If you build a coffin for a particular person, make the inside dimensions about 4 inches wider than the shoulder span and 5 inches longer than standing height.

Building a Casket: Plywood Primer

Hardwood veneered plywood is made of thin slices of wood, including oak, maple, birch, ash or cherry, that are factory-glued to a softwood plywood substrate. The product comes in 4-foot-by-8-foot sheets; you'll want to use panels that are 3/4-inch thick.

The first thing to consider when making a coffin is material choice. Besides selecting a species of hardwood veneer, you also need to think about veneer orientation. The casket plans show what's called a "book matched" veneer pattern. Neighboring pieces of veneer are mirror images of each other, glued to the plywood substrate side-by-side. Other options include slip-matched veneer (adjoining pieces oriented in a repeating pattern), as well as random veneer orientations. Although most lumber suppliers stock some kind of hardwood veneered plywood, you'll probably need to special order the particular grade, species and veneer style you want to make the coffin with. Leave yourself time for this.

While you're at the lumber store, buy some matching veneer edging tape or 3/4-inch-thick hardwood planks for making edging strips and lid trim. Plywood edges should be capped with solid wood.

Veneer tape comes in rolls that you cut to length and then glue onto the edges. Solid wood edging strips are slightly more trouble to install but absolutely reliable.

Building the veneered plywood coffin involves five simple steps: cutting the sides, ends and lid parts; applying veneer tape or hardwood strips to all exposed edges; joining the sides and ends into a box; cutting and installing the bottom; then applying a protective finish. The difference between a good coffin and a great one hinges on specific tricks you need to know at each stage, and the most important involves basic cutting skills.

Despite the advantages, veneered plywood has one main weak point: The thin surface layer of wood is prone to splintering if it's not cut with the right kind of circular saw blade. You can't expect good results using the standard blades that come with most saws. Instead, look for blades made especially for cutting veneered plywood or melamine-coated sheet goods.

You'll get the best performance if you put one of these on a table saw, though that's not absolutely necessary. I know a professional cabinetmaker who built more than 300 projects for publication during a 20-year period, all without access to a table saw. He used a handheld circular saw instead, following a straight edge, to flawlessly cut all parts, including acres of veneered plywood.

Make a few practice cuts, then prepare the coffin sides, ends and lid parts. Wait until later to cut the bottom. You'll get more accurate results if you cut it to fit within the assembled coffin.

Click here for plans to make a veneered plywood coffin.

Building a Casket: Edging With Solid Wood

(You can skip this section if you use glue-on veneer tape.) There are two kinds of solid wood edges involved in this project: 1/4-inch-thick by 3/4-inch-strips for the sides and ends, and 1 1/4-inch-thick by 1 1/4-inch-wide bulldoze (rounded edges) strips to frame the lid of the coffin. In both cases, success depends on two things: accurately cut strips and a smooth strip-to-veneer glue joint.

Make the strips about 1/32-inch wider than the actual thickness of the 3/4-inch plywood. And hold them in place with masking tape if you don't have enough large clamps. Just keep one thing in mind: The excess strip width must extend over both faces of the plywood, creating a slight lip where the two meet. By making the solid wood strip wider than the plywood thickness, you lay the foundation for a smoothly sanded joint.

Let the strips dry overnight, then sand them flush with the plywood using a gently guided belt sander with a 120-grit belt or a random orbit sander with a 100-grit disc.

As you work, remember the veneer next to the solid wood strips is very thin — less than 1/32 inch. Ugly wood and glue lurks underneath, so sand gently. If you wear through the veneer, you'll ruin the whole piece.

Building a Casket: Corner Joinery

There are several ways to connect the sides and ends of a veneered plywood casket. You can use 3/8-inch-diameter by 1 1/2- fluted dowels, No. 20 biscuits or the plug-covered screws shown on the coffin plans. Screws are especially attractive for three reasons: They don't demand special equipment to install; they act as their own clamps by drawing the sides and ends together; and they are ideal for caskets destined to be shipped or stored unassembled. Few people have the space to conveniently store a full-size casket, but the individual parts are easy to tuck away on a shelf or in a closet. The coffin plans show the two kinds of tapered plugs you'll find at woodworking supply outlets: edge-grain and end-grain. Choose end-grain when you want the plugs to stand out and edge-grain when you want them to blend in.

Immediately after bringing the sides and ends together, check that the overall assembly of the coffin is square. Although you could use a framing square for this job, a better option involves equalizing diagonal measurements. Measure diagonally opposite corners, then push or pull the assembled structure as needed to bring them within 1/8 inch of each other.

Screw the sides together temporarily, and measure and cut the 1/2-inch plywood bottom. Then glue and screw the sides together, and drop the bottom into the coffin before setting it aside to dry.

You can lift the bottom of the coffin out later for finishing, though having the bottom in place at this stage ensures the homemade casket stays square while it dries.

Building a Casket: Trim and Finishing

Moldings make an enormous difference to the look of any do-it-yourself casket, and you'll see a few options on the coffin plans. As a general rule, put the largest moldings along the bottom, smaller moldings under and around the lid, and the smallest profiles simulating frames on the sides and lid of the coffin. Using trim frames in this way is especially valuable with veneered plywood construction. The veneers are typically so perfect that they can look boring. Frames easily add visual interest to a handmade coffin.

Personalizing your coffin is one advantage of the handmade option. Two possibilities are incised carving and laser engraving. Create a design or initials on a computer, then print them out. Use rubber cement to glue the printed paper to your wooden coffin, then carve right through the pattern into the surface using a sharp chisel or chip-carving knife. If you want something even easier, you can find businesses offering laser engraving services. The inscription on the underside of my coffin lid was designed and produced 300 miles from my shop, then shipped to me for lamination with existing wood parts. The only hitch with incised carving is that it has to be done on solid wood. Hardwood veneered plywood, however, takes laser engraving very well.

There are many ways to finish wood, but a penetrating oil or a wiping-grade urethane makes a lot of sense with this project. I used Minwax Wipe-On Poly, though polymerized tung oil or Danish oil works well, too. Just slather some on, then wipe off the excess after 10 minutes. Let it dry 24 hours, then repeat the procedure three or four times and you are done.

You can add custom cushions to the interior when you make your own coffin, or maybe simply wrap a favorite quilt around some bed pillows.


Contributing Editor Steve Maxwell has been helping people renovate, build and maintain their homes for more than two decades. “Canada’s Handiest Man” is an award-winning home improvement authority and woodworking expert. Contact him by visiting his website and the blog, Maxwell’s House. You also can follow him on Twitter, like him on Facebook and find him on . 


Read more about green funerals: Planning a Green Funeral at Home.


Previous | 1 | 2 | 3 | 4 | Next






Post a comment below.

 

Renee
7/19/2012 3:23:04 PM
My father had requested a homemade casket for his burial. He had a terminal disease and wanted to see it before he died. My husband and build it in our garage. the funeral told us how to measure and what materials were allowed in this area. we burnt his name on the side. Inside we placed items his mother had made in his childhood. It was stored at the funeral home until needed. He got to see pictures of it. We had a lot of comments on it. Even had requests to buid others. We build one more....for my mother. She wanted to use hers as curio/bookcase before it was needed. If you build a casket for someone, personalize it as much as possible. And let them see it. It's a true labor of love.

Dayton Fournier
12/17/2010 11:08:27 AM
How do I get the plans for these caskets? I could not fine the link to get to the plans? Thanks Dayton

sue kruskopf
11/11/2010 11:05:14 AM
More and more, people want to have their funerals personalized and this is another way to do it. On our free site, mywonderfullife.com, you can let your loved ones know exactly what you want along with your homemade coffin, and ease their burden.

bob_58
3/18/2010 3:09:28 PM
this is a good article and i think very helpful for those who would be interested in making there own coffin..im going to make mine soon and store it in our storage shed..but there is also a great web site for wood workers and there are some folks there who have made caskets also its called lumber jocks. a good resource also...thanks...grizzman

bob_58
3/18/2010 3:03:03 PM
this is a good article and i think very helpful for those who would be interested in making there own coffin..im going to make mine soon and store it in our storage shed..but there is also a great web site for wood workers and there are some folks there who have made caskets also its called www.lumberjocks.com a good resource also...thanks...grizzman

Joey Teem
6/16/2009 10:57:26 PM
I am a wood worker/beekeeper. I build and sell Top Bar Hives and would like to offer my skills as a coffin builder if needed. I am also building an online community for Homesteaders, wood workers, beekeepers and so on at www.customwoodkits.com Thank you. Joey

bj_2
12/19/2008 4:22:11 PM
Don't know if you are taking names still of those who would build coop or casket for others. But I'd be willing and able to do this in the Seattle area. Thank you, Brian Hayman bjhayman@msn.com

bj_2
12/19/2008 4:07:43 PM
Making coffins article. Do more and when possible have drawings or more pictures close up. Thanks

RUSTY WARREN
12/8/2008 5:59:10 PM
Wonderful article,however how can I get some rough plans,and how do I get the legal requirements for being buried in a National Cemetary? thank you Rusty

Heidi Hunt_2
1/2/2008 2:50:35 PM
To print the images from the Image Gallery, hit Ctrl+P on a PC or Apple+P on a Mac.

Kenneth_18
12/30/2007 9:17:29 AM
I also have found it impossible to print the drawings in the article. I need them to guide me in making my own casket from solid wood. Please advise me on how to obtain the drawings.

jennifer_46
12/29/2007 8:22:41 PM
I need the photos that go along with this article. My son, 31 year old Peter, died of hypothermia. My friend is going to make his casket, since Pete loves nature. He needs the drawings. I can't seem to print the gallery photos out to get to my friend.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.