A Portable Solar Water Heater

For less than $10, you can make a portable solar water heater that provides hot water just about anywhere.

  • 062 solar water heater - in use
    The portable solar water heater in use.
  • 062 solar water heater - five panels
    PHOTO 1: Cut a 1/4 inch hole in the inner tube. PHOTO 2: Take a 1/2 inch pipe coupler and cut off it's lower half. PHOTO 3: Spread a good amount of rubber-sealing compound on the small ridge of the coupler. Insert into the inner tube's hole. PHOTO 4: Put some rubber-sealer on your finger and coat the outside area. PHOTO 6: The portable solar water heater can easily be emptied, rolled up, and tucked into a backpack or satchel.

  • 062 solar water heater - in use
  • 062 solar water heater - five panels

Most of us have — at one time or another — longed for the luxury of a hot shower while on the road or trail. Well, there's no need to yearn any longer, because I've come up with a portable solar water heater that will cost you less than $10 to build and can be folded and carried in a backpack, suitcase, car or boat!

Not only that, it's also amazingly easy to construct this heating unit. Here's what you need to put one together: one auto inner tube, a length of used garden hose, a 1/2-inch plastic pipe coupler, a small clamp, a male hose connector, a hose valve or nozzle, and some good-quality rubber-sealing compound.

Here's How to Build It

It's generally possible to scrounge up a free, secondhand inner tube in good condition, or — at worst — buy a used one for no more than $1.50 from a tire shop. When you select yours, keep in mind that a 14-inch tube will hold around 19 quarts of water. (If you want greater or smaller capacity, simply go up to a 15-inch truck tube or down to a 13-inch compact car size.)

Once the tube proves to be sound (just inflate it to find out if it has any leaks), use a sharp pair of scissors to cut a 1/4-inch hole about two inches in from the outside edge. Now, wet your finger with water, stick it into the hole, and clean around the inside.

Next, take the 1/2-inch pipe coupler and cut off its lower half, glob a good amount of rubber-sealing compound on the small ridge of the coupler, and push it into the 1/4-inch hole. (This task may require a little effort, but — to make it easier — you can leave the tube in the sun for a while to soften up the rubber.)

With the lower part of the coupler in the hole, pull the ridge up snug against the inside of the tube and let the cement dry for the maximum time stated on the product's label. (Remember, if it doesn't dry properly, your seal will be worthless.)



Feb 19-20, 2022
Belton, Texas

Join us for a much anticipated return to the Lone Star State! Earlybird ticket discounts are now available online.


Subscribe Today - Pay Now & Save 64% Off the Cover Price

50 Years of Money-Saving Tips!

Mother Earth NewsAt MOTHER EARTH NEWS for 50 years and counting, we are dedicated to conserving our planet's natural resources while helping you conserve your financial resources. You'll find tips for slashing heating bills, growing fresh, natural produce at home, and more. That's why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.95 (USA only).

You may also use the Bill Me option and pay $17.95 for 6 issues.

Canadian Subscribers - Click Here
International Subscribers - Click Here
Canadian subscriptions: 1 year (includes postage & GST).

Facebook Pinterest Instagram YouTube Twitter flipboard

Free Product Information Classifieds Newsletters