Learn the how and why of do-it-yourself hydroponics.
A well-kept hydroponic garden requires less work than its traditional counterpart.
At first thought, the practice of growing plants in an inert medium (such as gravel), feeding them periodically with dissolved nutrients, and then draining away the fertilizing solution to aerate the roots seems downright “unnatural.” But people all over the world — from India (where folks frequently feed themselves from discarded containers filled with rubble) to the Netherlands Antilles (where large hydroponic farms operate with distilled seawater on otherwise useless agricultural land) to the good ole USA (where even famous organic gardeners, such as Eddie Albert, endorse hydroponics) — are finding that hydroponic systems do, in fact, have many practical advantages over "ordinary" soil cultivation techniques.
Take, for instance, the fact that hydroponics gardeners can often obtain a greater crop of tasty and nutritious foods (or of healthy ornamentals) from a smaller space simply because the amounts of nutrients given to a plant and the times of those nutrients' application can be controlled and adjusted and tailored to meet that particular plant's specific needs.
Hydroponics also can be successfully utilized on many tracts of land unsuitable for normal cultivation regardless of the native soil type. In addition — and somewhat surprisingly — the system of propagation uses less water than conventional gardens (because the runoff fluid can be recycled for several days), which makes it ideal for use in deserts and other water-poor regions. Other benefits can include:
Perhaps best of all, these many benefits apply to all hydroponics operations...from the ultra-simple flowerpot-fed-through-a-wick setup to the fully automated commercial greenhouse. Anyone, in short, can put them to work in his or her garden...whether it's large or small, simple or lavish, "just for fun" or seriously cultivated for food and/or profit.
The hydroponic container can be anything which will hold up a bed of growing medium, usually about 8 to 9 inches deep. Galvanized iron or tin should not be used because the excessive zinc can poison the plants. Wood, plastic, concrete, roofing felt, brick, mortar, plaster, mud, clay, fiberglass, plastic resin, etc. — all are quite suitable. Redwood will not rot if set in the ground, but other wood, especially plywood, must have protection both inside and out from rot. Asphalt emulsion is a good, non-toxic preservative, and should be painted on all surfaces in contact with the ground. Also suitable are jars, boxes, flowerpots, old packing crates, or discarded buckets and barrels. In short, anything at all will do which is non-toxic to plants. The cheapest materials are those which can be found or scrounged.
Some people build troughs right on top of the ground. There should be a liner (plastic, tar paper, mud plaster, etc., work well to discourage soil-borne insects and diseases) between the bed and the soil, and the ground should be graded in an even, gentle slope for good drainage. It is essential that there be no low spots which will collect stagnant puddles. However you make them, plant beds should not be so wide that you cannot easily reach all parts while standing outside.
If you do not intend to recover and recycle the nutrient solution, the bed need not be watertight and can have any number of drains. Several drains will tend to improve aeration.
The function of the growing medium is to hold up the plant roots, while at the same time it must retain moisture and permit the roots to breathe. If the medium is too fine, it will retain too much moisture, become soggy, and suffocate the roots. If it is too coarse, it will breathe quite well, but it will also dry out very quickly. The medium must be non-toxic, and — so far as possible — inert.
The most popular and dependable growing medium is plain pea gravel (114 to 318 inches) in beds about 8 inches deep. It is clean, easy to handle, and — best of all — it breathes freely. It is also quite heavy and needs to be well supported. Another quality of plain gravel is that it dries quickly and, therefore, needs to be watered at least twice each day. In fact, on hot, dry days, you may have to do three or four daily waterings.
Gravel can be purchased locally anywhere they sell building supplies, cement or landscaping materials, and usually doesn't cost more than a few dollars per cubic yard. It can also be gathered for free, if you are willing to screen and wash it.
If you want the growing medium to retain moisture for a day or two, then you must mix sand with the gravel, or use a mixture of coarse and medium sand. The finer the sand, and the more of it you mix in, the better it will retain moisture. But it will also breathe less well. In general, five parts gravel to two or three of sand will work well. In very dry climates, the ratio might be two parts coarse to three parts fine. Ultimately, it is a matter of experiment and experience.
Perlite and vermiculite are both made from natural mineral substances which are expanded into lightweight and absorbent particles. Vermiculite (expanded mica) should be mixed 1/3 to 1/2 with coarse sand; otherwise it becomes too soggy. Perlite (expanded sand) may be used alone. The main advantage of these substances is their very light weight, which makes them ideal for use in hanging baskets, on rooftops, or other places where the heavy weight of sand or gravel would cause trouble. They may be purchased at almost any garden supply yard. Be sure to get the coarse grade. Soak before planting.
Some growers have used straw, hay bales, sawdust, or peat moss. These substances are inexpensive, light, and readily available. But, being organic, they tend to break down and disintegrate, and are more likely to harbor fungus and disease organisms. They must be watched to see that they don't become soggy in spots. Wood chips (pine or cypress) are said to be very good for hydroponic systems which do not flood the container (they will float away). Soak for several days before planting, and make sure there is good drainage.
NOTE: Whenever the medium has the ability to retain moisture for more than one day, it will probably tend to build up excess levels of nutrient salts over a period of time. To prevent this, every third watering should be a plain-water flush, to wash out excess salts.
For the small grower, any water that's good enough to drink is going to work quite well in your garden, since plants have a much higher tolerance for impurities than you do. You can test water simply by putting some cut flowers in a vase of the sample being tested: if they last the usual time before wilting, the water is almost certainly safe for irrigation.
The feeding of plants is the heart of hydroponics. Feeding plants well and with personal attention is what makes your homegrown vegetables superior to almost any other produce. You can learn to adjust the nutrients to suit your climate, location, crop variety, and varying weather conditions.
The subject of nutrients is both the easiest and the hardest part of home hydroponic gardening. It is easy because there are good quality commercial plant food mixes suitable for your needs, which you can buy.
All you need to do with commercial bought mixes is dissolve the dry mix in water, 1pound per 100 gallons (1 or 2 teaspoons per gallon), then feed and water your plants at the same time.
When you begin your first garden, we recommend that you start with a prepared plant food mix. Later, once you get into the swing of things, you may decide to learn how to mix your own tailor-made plant food, or tune up the prepared mix you purchase.
This brings us to the hard part...learning to mix your own hydroponic formula. Mixing your own is cheaper, more flexible, more fun, more educational, more challenging, and more satisfying. It is also more trouble to do and more difficult to understand.
CHEMICAL MIXTURES. The plant food recipes given here are only representative of the hundreds of available formulae, but they can be counted on to give you good results. After the chemicals are carefully weighed and measured, break up any lumps, and mix very thoroughly together into a fine powder. Never allow nutrients to get damp or wet before using. When making a solution, stir powders vigorously into water, but don't be surprised to find a certain amount of undissolved solids, especially when using superphosphate. Trace elements are given in a separate formula.
To mix less than 100 gallons of solution, merely mix and store the larger quantity of powders, then use at the rate of 4 teaspoons. per gallon, or 1/2 pound to 25 gallons. For larger quantities, simply multiply the formula.
TRACE ELEMENTS are mixed separately, but must be included in each batch of nutrient solution. The various powders must be ground very fine with a mortar and pestle and mixed very thoroughly. When adding dry trace mix to a batch of dry powders which are to be used a bit at a time, the trace elements must be mixed in very thoroughly to get even distribution.
Mix well and store dry. Use 1 gram (about 1/2 teaspoon) per 100 gallons of nutrient solution. For smaller batches, dissolve 112 teaspoons of the trace mix into one quart of water, use 1 liquid ounce per 3 gallons of nutrient solution. Do not try to save any unused trace mix solution. (Note: Many hydroponics books suggest that the do-it-yourselfer forget the trace mix and simply add a pinch of iron sulphate — enough to cover the head of a match — to the original mixture. Quite often the other micro-nutrients will be present as impurities in the water and fertilizers. — MOTHER.)
ORGANIC FORMULAS. Another fascinating aspect of hydroponic food making is the manufacture of nutrient solutions from 100 percent natural/organic substances. That's right...organic hydroponics!
The Sharder process (a hydroponics method developed in the poor regions of India where chemical fertilizers are largely unavailable) uses a growing medium consisting of five parts small gravel and one part fine sand. Set into the beds at 2-to-3 foot intervals are sludge pots, which are any kind of covered vessel which will hold about 2pounds of sludge, lined with a screen and pierced with numerous little holes in the bottom. Here is one recipe for nutrient sludge:
Mix well and dilute with water into a thick sludge, then place in the sludge pots. Use plain water in the same manner as normal hydroponic operation and the pots will slowly release their nutrients. Watch the pots carefully to keep them from running out, and also to keep them from drying out. The sludge has to be kept moist enough to release slowly through the screen-lining of the pot.
Here's another recipe which uses manure and oilcake. Oilcake is the leftovers after pressing seeds of cotton, hemp, flax, soybean, etc., for oil. It is normally used as feed, and may be obtained in feed stores.
The oilcake is matured by mixing in a little water, some ground bones, and some potash...then storing everything in a closed container for a couple of months (which disposes of smells). To about one pound of dried dung, add about 114 ounces of matured oilcake, then mix with enough water to form a sludge. Use as described in the previous recipe.
Assuming that you now have a container of growing medium in a sunny location, the only remaining essential step between you and a flourishing garden is to put into operation some method or routine which will deliver the nutrient solution to the plants. There are various ways in which this can be done, but the goal of all is the same: to keep the roots damp but not soggy.
When checking for proper moisture, look beneath the top layer of medium, into the center of the bed (where the roots are), and keep a sharp eye on the plants themselves.
Try to keep the surface of the medium dry. In those systems which flood the beds, there should be an overflow tube at a level of 1 inch below the surface of the medium. This will help cut down on fungi and algae, and will keep from washing surface debris down into the medium.
HAND WATERING. This method requires that some person go to the garden whenever it needs to be watered in order to turn the handle, tip the bucket, or in some way pour, sprinkle, or spray the bed with nutrient solution. This method involves the least paraphernalia, and is the most direct, cheapest, and easiest to set up. It is also the most demanding of personal attention. If you don't want to water once or twice each day, you will have to use some growing medium other than plain gravel.
WICKS. This excellent hydroponic method is the very best thing for small containers such as hanging baskets, window boxes, pots, patio gardens, or any container under about 1 1/2-by-2 feet by 6 inches deep. The main limitation on this method is that it cannot be used to grow large plants or those with lush foliage, as it does not furnish moisture fast enough. By the wick method of feeding, the nutrient solution is stored directly under the growing medium, usually in some arrangement of nested pots, and drawn up through wicks made of glass wool or similar material.
The wicks should be long enough so that about 4 inches hangs down into the nutrient solution and another 4 inches extends above the level of the bottom of the growing bed.
The wicks are pre-soaked, then drawn into the bed through holes which are just the same size as the wick. Put down about one-quarter or one-third of the medium, divide each wick into four strands, spread the strands around evenly, then cover with the remaining medium. Wicks should be about 8 inches apart, and the medium no more than 6 inches deep. The best medium for this method would be perlite, vermiculite, or plaster sand.
This method is utterly convenient, simple, and easy to operate (all you have to do is refill the tanks with nutrient solution from time to time).
DRIP METHOD. This method is used quite a lot by commercial growers. There are many variations to the idea, but basically it involves a tank of nutrient solution, which is elevated above the bed and allowed to flow out through tubes, which may be either over the surface of the bed or buried in the medium. A home-scale version of the drip method looks something like intravenous feeding in a hospital, with a tube running from a bottle of nutrient solution into each pot and container. At each pot there will be a little petcock, squeeze-clip, or valve which lets out a constant slow drip. Excess fluid is collected in saucers or trays under each pot and recycled.
PUMP AND TIMER. This is the All American Hobby Greenhouse Favorite. A reservoir (sump) of nutrient solution is placed below the level of the bed, and a submerged pump, activated by a timer, automatically floods the beds 2-to-4 times each day. The pump is timed to stay on however long is necessary to flood the beds, then the fluids are allowed to slowly drip out and drain back into the reservoir. Pumps are rated by the number of gallons they will pump per hour. Get one big enough to fill all your beds in one-half hour.
There must be an overflow tube in each bed, at a level one inch below the surface of the medium, to prevent flooding of the surface of the bed. There must also be some sort of screen or filter to keep grit out of the pump. The nutrient tank must contain at least 50 percent more than the volume of all the beds, to accommodate losses due to evaporation and transpiration.
(Alexandra and John Dickerman, authors of Discovering Hydroponic Gardening, mention yet another way to operate your hydroponic garden: the standing solution method. In this system, plant roots are always submerged in the nutrient mixture, and aeration is provided when air is bubbled into the liquid. — MOTHER.)
Once your hydroponic setup is complete, you may find the following growing tips (suggested in the many books listed at the end of this special article) helpful in maintaining a healthy and productive garden.
Hydroponic sprouting for animals is popular all over the world with farmers, ranchers, horsemen, and zoos. It is a compact, simple, and cheap way to produce high-quality green forage for house pets or farm animals. A space 20 feet long and 8 feet high can turn out 1,000 pounds of greens every day, all year round. Any kind of grass or cereal grains can be sprouted—rye, oats, barley, alfalfa, etc. The nutrient solution increases the food value of the final product. It takes about seven to ten days to go from seed to an 8 inch mat of greens, packed with vitamins and minerals. Here's how you do it:
Sprouting is done in trays about 3 or 4 inches deep and any convenient length and width. The bottoms are lined with a thin layer of absorbent material such as burlap, foam rubber, or edible paper. Soak your seed overnight in plain water, then spread it generously and evenly over the bottom of the tray. Keep the bottom moist but not soggy with a half-strength nutrient solution. Keep the tray in a warm, semi-dark place for a couple of days. Then, when the sprouts are about a 1/2 inch high, let them have light. Add the weak nutrient solution from time to time but, after six days, use plain water. When the greens are ready, just peel up the entire mat and watch your animals gobble it, sprouts, roots, seeds, and all.
If you start a new batch every day or so, you can harvest a steady supply. Trays can be stacked and grown compactly in racks. With a little thought and planning you can set up a very compact and efficient feed production unit.
Sprouting works best at a temperature of 65 degrees to 70 degrees Fahrenheit. If the weather turns very cold, you will have to provide artificial heat or quit. A lot can be done in some warm corner of your house, but in order to do large-scale production in cold weather, you must use a well insulated and heated structure.
Most of the material in this special feature has been excerpted from Hydro-Story (formerly Hydroponic Gardening at Home) by Charles E. Sherman and Hap Brenizer (with the permission of Nolo Press, Box 544, Occidental, Calif. 95465). Some of the selections have also been summarized by MOTHER's staff from the additional sources listed.
Our many thanks go to the authors and publishers of the following resource books:
More than 150 workshops, great deals from more than 200 exhibitors, off-stage demos, hands-on workshops, and great food!LEARN MORE