# How to Calculate Gas Mileage

Learn how to calculate gas mileage and take the first step to saving money on gasoline. Don’t worry, the math is easier than you might think.

| GUIDE TO GREEN CARS, Summer 2012

This calculation only works if you previously filled your vehicle’s gas tank and reset the trip meter to zero. After refueling, fill in the blanks to know your mpg.

MOTHER EARTH NEWS STAFF

Even if you hate doing math, it’s easy to check the real-world gas mileage of your car or truck. If you’ve avoided learning how to calculate gas mileage for fear of complex equations, fear not — anyone can do this. Plus, there are several benefits to watching your vehicle’s exact mpg.

First and foremost, knowing is half the battle. While it can be all too easy to assume your vehicle gets 30-something mpg — or whatever the sticker said when you bought the car — regularly calculating gas mileage is the best way to know how your vehicle is really performing versus what it could achieve. Furthermore, observing how mpg changes over time will give you a better understanding of positive and negative influences on gas mileage, which will make it easier to change your driving habits and thus save money on gas.

Next, think of regularly checking your vehicle’s mpg as akin to listening to it with a stethoscope. Sustained declines in gas mileage without obvious explanations (driving habits, frequent use of air conditioning, etc.) might point to a maintenance need that could become an expensive problem if left untreated.

Here are the steps to check gas mileage:

1. Fill up your vehicle’s gas tank. But know that it’s not worth topping off after the pump nozzle quits. Doing so can be bad for the environment and waste your money. Pumping in too much “extra” gas can lead to spills or even damage your vehicle’s vapor collection system, which captures harmful and polluting vapors before they can escape into the atmosphere. (Learn more in Don’t Top Off Your Gas Tank!.)

2. Reset your car’s trip meter to zero. Now you’re on the gas mileage clock.

homejobs
8/26/2013 1:38:09 PM

george newell
5/16/2012 8:27:21 AM

To calculate how much additional time is required when travelling 55 mph instead of 65 mph, use the following formula: DISTANCE / MPH / 24 = #MIN_REQ. Based on this, if you are travelling 60 miles, you should give yourself an additional 10 minutes to get there at the slower speed. That means if you are travelling 178.75 miles, allow yourself an extra 30 minutes. As you can see, it really isn't much of an inconvenience to cut back your speed on the highway, but it can mean the world to you at the gas pump. I save 15% on my fuel cost. At \$4.00/gal, that's like only paying \$3.40 for the same gallon, and who wouldn't really like to save 60 cents per gallon?

george newell
5/16/2012 7:36:26 AM

kevin rooney
2/10/2012 3:02:33 AM

Whoever wrote this article... John Rockhold, you read my mind. This is what I've been doing for a few years now. I drive a Honda Accord with a V-6 and close to 90,000 miles, mainly on either local roads or in rush hour, so I get in the low-mid 20's on average. A few weeks ago, I noticed that my MPG has been much closer to 20 (my bare "acceptable" minimum) than I'm comfortable with, so I put some air in my tires. Boom, it's back up into the "normal" range.

### MOTHER EARTH NEWS FAIR

#### Feb. 17-18, 2018 Belton, Texas

More than 150 workshops, great deals from more than 200 exhibitors, off-stage demos, hands-on workshops, and great food!