Maybe there are just too many gallon-sized plastic jugs in the world to save all of them, but making this plastic bugle will allow you to find a new use for one.
The throat is inserted into the lower end of the container's handle. The pitch can be varied by adjusting the length of the tubing.
Marlin Spike Werner
It breaks my heart to think of all the waste that's constantly dumped on our poor planet. Consequently, I'm always seeking ways to divert used containers and other castoffs to new purposes. And though it may be considered tooting my own horn, I must say that I'm particularly proud of my latest achievement: the plastic bugle.
To make the "bell" section of this madcap musical instrument, simply cut the top off a one-gallon plastic jug, just below the handle. Then, for the bugle's "throat", thread a 93" length of 1/2" (outside diameter) vinyl tubing through the handle, directing it upward from the bottom, and secure it with rubber cement or caulking. (This may look peculiar, but nobody ever said a bugle's throat has to come into the back of the bell!)
I've experimented with two kinds of mouthpiece for this homemade horn. One that I like is made from a small plastic container that once held a roll of Kodacolor film. I simply cut a 7/16" hole through the can's bottom to accommodate the free end of the vinyl throat (make sure the tube fits snugly), and another hole in its cap. (You'll have to experiment with the size of this playing hole, however, in order to suit it to the bugler's pucker.)
A different type of mouthpiece can be made by cementing a 1/2" plastic pipe fitting, instead of the film can, on the end of the tubing. However, while this arrangement looks more refined and is less troublesome to make, it doesn't allow for pucker variations. Regardless of which version you try, bear in mind that all the connections must be airtight.
The basic pitch of my unusual noisemaker can be varied by changing the length of the tubing. In fact, if the throat is very long, you'll have — instead of a plastic bugle — a "flexible flagon" French horn.So experiment! After all, the materials you need certainly aren't hard to come by. And who knows? You just might end up with the world's best "plastic jug band!"
More than 150 workshops, great deals from more than 200 exhibitors, off-stage demos, inspirational keynotes, and great food!LEARN MORE