Home Electrical Repairs in the Real World

Here are some of tools and skills you need to complete relatively simple home electrical repairs.


| December/January 1998



171-home-electrical-repair-02-outlet-box.jpg

A common wiring scenario. Notice how the double terminals on the receptacle function as a splice between the incoming and outgoing hot (black) and neutral (white) wires. With only one ground terminal (top), the receptacle needs a short pigtail ground wire, which is wirenutted to the ground wires of the two cables, plus another pigtail attached to the metal box. On a plastic box, the second pigtail is eliminated.


THOMAS MOORE

If you're like most people, when the weather turns cold, gray, and damp, you turn inward. I'm not talking about transcendentalism; I'm talking about your house. Late fall is the perfect time to consider all the in-home repairs and upgrades you've left on the back burner during the busy growing and harvesting seasons. With this in mind, you decide today is the right day to replace that broken light fixture just inside the back door. You already have the new light (you bought it last year, remember?), and those fix-it-yourself shows on TV make its replacement look like a ten-minute no-brainer. But as you remove the fixture coverplate, the gray fall light does not reveal what you saw on TV; it reveals a tangled mess of perhaps ten or more individual wires connected with as many as four or five wirenuts. Where's the simple "black wire-to-black wire" and "white wire-to-white wire" scenario you saw in the fixture instructions? Why, there's even some red wires in there!

Basic Tools and Accessories

For simplicity's sake, I'll focus my advice on three home electrical repairs homeowners are likely to attempt: (1) replacing a light switch, (2) replacing an outlet, and (3) replacing a light fixture. Later, I'll give you some tips on methods that are common to all three of these endeavors, as well as other wiring projects.

To save time, you should have the tools, accessories, and replacement devices on hand before starting the actual work. The basic tools for electrical work include needle-nose pliers, a pair of linesman's pliers, tools that cut and strip wire, a utility knife, various screwdrivers, and a test light or multimeter. Some typical accessories include things like wirenuts of different sizes, electrical tape, grounding screws or clips, and short pieces of copper wire for making ground connections. As for the devices, that's where I start giving you some of that advice I promised. To select the proper light switch, first determine if it works alone or in conjunction with another switch or switches to control the light. If it works alone, it's a simple, single-pole switch. If you can operate the light from two locations, the switch (or switches, if you replace both of them) you'll need is a three-way switch. Don't let the term "three-way" confuse you; it refers to the way the switch itself works, not to the number required to do the job. A light that can be controlled from more than two locations uses two three-way switches, plus a four-way switch for each additional location. In this instance, the only way to determine whether the switch is a three-way or four-way switch is to remove the switch's coverplate and see how many wires connect to it. A three-way has three connected wires and a four-way has four (excluding any ground wire). How many switches should you buy? The answer in the first case is obvious, but in the second and third cases it depends on your situation.

In cases involving more than one switch, if you're replacing the switches for cosmetic purposes (such as remodeling), you must buy all of them. But if you want to replace only the defective switch in a multi-switch job, you have two options: swapping a new switch with each suspected one until the light works, or using a multimeter or test light to locate the bad apple in the bunch. If you don't know how to test a switch, then swapping is probably your best bet. All that's left is choosing the color and style of your new switch and — if you make a change in either category — buying a new coverplate. Color and style will also play a part in choosing a new receptacle, but location will be the most important factor.

The National Electric Code now requires the use of Ground Fault Circuit Interrupters (GFCIs) in many areas of your home. These areas include bathrooms, kitchen counters within six feet of a sink, cellars, garages, and all outdoor locations. A GFCI is a "smart" receptacle: it can detect an electrical "leak" (possibly through you to the ground) and shut itself off in a fraction of a second. Any other receptacles you buy must be the three-pronged, grounded type.

As for light fixtures, be sure to choose one with the same or lesser wattage as the one you're replacing, unless you are aware of the load connected on the circuit. Also, don't forget about the unit's capacity (will it provide enough light?) and its weight. A heavy chandelier should be hung from a steel box directly attached to a wood framing member, and, to satisfy most building codes, a fan-light combination needs to be hung from a special steel fan box that uses lock nuts. So if you buy something along those lines and your old box doesn't measure up, be prepared to use the old hammer and saw.





mother earth news fair

MOTHER EARTH NEWS FAIR

Oct. 21-22, 2017
Topeka, KS.

More than 150 workshops, great deals from more than 200 exhibitors, off-stage demos, inspirational keynotes, and great food!

LEARN MORE