Easy Solar Power

With superefficient peel-and-stick PV sheets, solar power is better than ever!

| October/November 2006

easy solar power - raising panels to roof

Step 2: Raise the solar roof.

Matthew T. Stallbaumer

Installing clean, reliable, inflation-proof solar power is easier than ever, thanks to the invention of thin-film photovoltaic (PV) laminates that can be bonded directly onto metal roofing panels. Unlike crystalline PV material, there's no need for obtrusive racks and heavy, expensive glass. Instead, unbreakable thin-film PV is produced using amorphous silicon, encapsulated in Teflon and other polymers.

Thanks to pioneering work by Steve Heckeroth, a Mother Earth News contributing editor and the director of building-integrated photovoltaics for Energy Conversion Devices (ECD) Ovonics, this thin-film PV is now available in easily shippable, 16-inch-wide rolls. It's a peel-and-stick laminate. You just unroll the sheet, lay it faceup on a flat metal roofing panel and press it onto the panel while your assistant pulls the protective sheet off the sticky backing.

Invented by ECD Ovonics co-founder Stan Ovshinsky, thin-film laminates offer several advantages over crystalline PV panels. (See Meet Stan Ovshinsky, the Energy Genius for a profile of Ovshinsky and his remarkable renewable energy inventions.) Thin-film sheets perform better in high temperatures and in partly shaded conditions, and they require 100 times less silicon, which means thin-film PV is expected to become less expensive than crystalline as production capacity expands over the next few years.

We had a chance to get a firsthand look at this exciting new PV option after Heckeroth offered to install it on the new metal roof I was putting on my small barn last summer. We invited the public, and Heckeroth led a workshop about solar power. Nearly 50 folks spent an unusually hot, 100 degree May day watching and helping as Heckeroth showed volunteers how to bond the thin-film PV laminates to the metal roof panels. Then local architect and builder Kenton Knowles and his Global Homes crew installed the panels on the barn. As the sequence of photos shows, it's hard to imagine a simpler way to install grid-tied, solar-electric power on a new or replacement metal roof. It took only five to 10 minutes to apply each PV sheet to a roof panel.

Our new metal roof was 24-gauge Galvalume steel from Englert, Inc. It should last at least 50 years, and the steel can be recycled, making it an excellent sustainable choice for any building. After the roofing panels were installed, Heckeroth danced briefly along the ridge to snap the connecting wires together, and then our electrician, Robert Gore, wired the direct-current output from the thin-film PV into a Fronius inverter. The inverter converts the direct-current power generated by the solar panels to standard 110-volt alternating current. Then the power flows through the new meters installed by the utility company (at no charge!) and into my home.

The sun was blazing, and the roofers were really sweaty, but as soon as Gore flipped the switch, everyone smiled as the inverter kicked on and the digital readout quickly climbed to "1,530 watts," showing exactly how much electricity the new system was delivering to the house. Anytime the house needs more power than the PV is producing, the system draws from the utility grid.

10/8/2014 3:15:32 PM

Hi Mother, can you send me a web site to buy this panels, that old site DCpower.... does not work any more

aleksandr biyevetskiy
7/28/2014 1:05:26 PM

Wow, love all the excitement generated by the installation of the thin-film PV solar laminates on a metal roof. To gather up as many as fifty people in a 100 degrees weather speaks volumes of people's desire to tap into the power of solar energy. - I think it is a truly innovative product for anyone who happens to have a standing seam metal roof installed on their house. Besides, I do not even see a point in installing a long lasting PV solar power system on any other type of roof like asphalt, which may only last some 12 to 17 years on average according to http://www.newenglandmetalroof.com/, while most modern PV solar power systems are warrantied for at least 20 to 25 years, with only incremental loss in power generation after the first 10 years or so. No point in having to replace your roof while your solar panels are still generating electricity and helping you save money on your energy costs. Not too mention all the roof penetrations required for the installation of a solar power system on a regular roof. - roof penetrations are not good for your roof's health, especially in the long term. Standing seam metal roof is def. the way to go if you want to get a long lasting, energy efficient, and structurally solar roof combo. I would highly recommend standing seam metal roof if want to go solar route, whether or not you opt for thin-film PV laminates or traditional crystalline solar panels.

7/10/2014 5:19:22 PM

Hi, I also agree that the global warming is just another occasion to make the business running, sell CO2 limits, simply to make money. Nevertheless, I think we should go more green and start to use better solutions - the renewable sources energy, just because our supplies of coal, to name one, will run out. The prices of imposing a pv system are decreasing, we can also do it ourselves, there are more tools to do it accessible than were before, like apps help you with the whole process, gather data and provide you with financial analysis (here's one: http://easysolar.co/ ), which, to be honest, is essential. One of the main reasons for installing solar panels is to save money, right? So, I hope people will become more eco-friendly for the good reasons.. Elizabeth

matthew groff
7/1/2010 12:56:04 AM

Hello everyone! Another reason to go Solar, if power goes out due to bad weather or some other reasons like: A vehicle hits pole and knocks the wires down, Overloaded circut at power company causes blackout, etc. Then only those with generators or solar power will have electricity. But those with solar power will have more, depending on the type of system they have compared to those with a generator. Plus do not have to worry about filling up a generator or running out of fuel or fuems from the exhaust of the generator's engine possibly getting into the house.

barney five
11/29/2009 1:04:48 PM

I am very much interested in solar power but it has to do with the economics of the situation. No doubt this article and hundreds like it went to press before the recent revelation that global warming is a hoax, and a lot of "scientists" have sold their souls to politics. I certainly have nothing against being frugal and conserving all the energy I can to protect my pocketbook, but listening to all this balderdash about global warming for the last twenty years has had me shaking my head in disgust and disbelief that people can be so gullible.

9/5/2008 12:25:33 PM

The article mentions that thin films work best in warm temperatures. How well do they work at lower temps? My winters get down to -30F.

8/11/2007 2:21:27 PM

I have come up with a Method, to produce Electricity that will out produce Flat Panel (from 10 or 12%, to 60 or 70%) from 2.9 watts per Sq. ft., to 20 or 25 watts per Sq. ft.. What I need to know is, how much would 40sq ft of Thin-Film Laminate cost me? Or do I need to buy a larger amount, in order to get a good price, and get instructions on the application? God Bless and God Bless America George

8/4/2007 7:22:57 PM

I am very interested in the thin film PV which can be applied to metal roofing. I am building a new house in Florence, Oregon and have been unalble to locate the material used in the article " Easy Solar Power". Can you ask Heckeroth where It can be obtained for the home owner and can it be used on a hip roof? I have searched the internet and only been able to locate it for large comercial applications. Mother responds: You can reach the company at www.dcpower-systems.com

3/12/2007 2:04:42 PM

I haven't browsed though you web site but I noticed that when the page loaded there was a pop-up box requiring me to respond by filling out an application or click nothanks just to get rid of the box. I was so iritated by this box that I decided I will do anything to get rid of it. so i clicked not interested. Here is the problem. You are forcing people to make a decision when they haven't had time to decide if they are interested in the contents of your site. So if you want people to register their contact info on your site introduce the pop-up a few pages into the site and don't make it interfere with the view of the page in such an obvious way.

Crowd at Seven Springs MOTHER EARTH NEWS FAIR


Sept. 15-17, 2017
Seven Springs, PA.

With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.