A Modest Experiment in Methane Gas Production

For all the folks who want to find out firsthand if decaying garbage will actually and truly and honestly and really produce burnable methane, here is a modest experiment in methane gas production.
By the MOTHER EARTH NEWS editors
March/April 1973
Add to My MSN

The parts of a digester and collector in a very simple methane gas production system.

Content Tools

Related Content

Heading Northwest to the Farm in Oregon

From breadlines in the city to hanging clothes to dry, a woman shares memories of her family’s move ...

The Candidates Discuss Energy Issues

Find out what John McCain and Barack Obama have to say about energy issues including the use of nucl...

A Rind Is a Terrible Thing to Waste

Describes two effective alternatives to composting. Many factors can limit the ability to produce co...

Wood Gas Generator: Run Your Truck on Firewood!

Wood gas, or wood gasification, is a decades-old renewable energy technology that converts chunks of...

Ain't no doubt about it. . . if MOTHER EARTH NEWS' mail is any indication, an awful lot of folks want to know how to recycle home and farm wastes into high-quality fertilizer and methane gas for fuel. The only trouble is that—at this point—very few people in the United States and Canada know exactly how to go about the undertaking.

How big should a digester-generator be? What materials are best for its construction? Is the "batch" or "continuous feed" loading cycle most efficient? Can human waste be processed in a digester? Should the unit be above or below ground? Will the processor produce an odor problem? Can a house really be heated with the gas that is taken from decayed organic matter? Will the fuel power an internal combustion engine? Would it work better driving a steam powerplant? The questions pouring into our mailbox are endless.

Well, if you're a regular MOTHER reader, you know that—in an effort to pin down firm answers to such queries—we asked Ram Bux Singh (the world authority on farm and village-size methane generators) to help us build a prototype digester for MOTHER EARTH NEWS last summer. Singh's design—constructed almost entirely of recycled and scrap materials—was a marvel of low-cost, do-it-yourself engineering . . . and we had hoped to be able to pass some operational facts and figures along to you by now.

The only trouble is that the "expert" welder (no, we still won't tell you his name) who spent so much time telling us what a great job he was doing on the digester's water jacket . . . didn't do a great job at all. Matter of fact, it was an unbelievably lousy job and the whole generator is still—at this point—worthless for experimental purposes.

Come the first warm day in spring, though, we're gonna roll it out and fabricate a new water jacket for the critter . . . and, by fall, we should know a lot more than we do now about designing and building and operating a do-it-yourself methane gas station.

In the meantime, for all the folks who want to find out firsthand if decaying garbage will actually and truly and honestly and really produce burnable methane . . . here is Robert C. McMahon's modest experiment in methane gas production.

While you're waiting to build a digester large enough to process your farmstead waste into enough methane to heat the house . . . you may wish to try a simple, low (or zero) cost experiment that will familiarize you with the fuel's production and some of its characteristics.

Well, wish no more. Here's how to put together one of the simplest and least expensive methane production experiments of all. You'll need only a gallon cider jug, some sort of gas holder (I use a recycled, heavy-duty plastic bag) and—from the chemistry lab—some rubber tubing, a couple of tubing clamps, a two-hole rubber stopper, glass tubing, and a glass "Y".

Your first step in constructing a mini-methane-generator will be to make a manometer. This is a U-shaped tube, partly filled with water, that will let you know when your little digester is producing gas, indicate the pressure of that gas and act as a safety valve (since excess pressure will blow the water out of the manometer). Any chemistry student should be able to show you the proper way to heat and form your glass tubing.

A four-inch manometer dimension should be considered a maximum for both practical and safety reasons. Filling the tube with water to such a depth will give you eight inches of pressure, which is more than sufficient. Gas appliances usually operate on pressures of less than eight inches and there's no reason for you to risk blowing your jug apart with gas compressed beyond this amount.

Once your manometer is completed, you should make a "burner tip" by drawing out a piece of glass tubing in the approved manner (again, any chemistry student should be able to help you if you've never formed glass tubing before). I made my tip quite long as a precaution against the possibility of a backflash and advise you to do the same. Then attach the stretched-out burner to one arm of your glass "Y" with a short piece of rubber tubing on which a clamp is placed to act as a valve.

The other branch of the "Y" feeds directly to your gas collector through a longer section of rubber tubing (also fitted with a clamp). My collector is a polyethylene milk bag taken from a cafeteria-type dispenser. The cardboard cartons that fit inside such dispensers are thrown out after one use and you'll find that each box contains a bag-liner. Fully inflated, the bags are somewhat larger than a king-sized pillow. I washed one out, rolled it up to expel the air inside and hooked it to my "Y".

Now you're ready to place some manure in the jug. The best type appears to be a mixture of droppings and litter from a chicken barn but, if you can't get that, try something else. I used straight horse manure on my first run and it produced gas. The very most efficient formula, of course, is 30 parts of carbon to one part nitrogen . . . but you can think about that later. Our objective right now is to get your methane experiment moving.

Mix the manure with water to form a slurry and pour it into the jug. (The narrower the container's opening, the more humbling the experience!) Fill the jug to about four inches below the stopper (there'll be some initial foaming and you want to keep it out of the tubing).

The most efficient generation of methane takes place at 90 to 100°F and, if your slurry's temperature drops much below 80°, the gas production will be slow or nonexistent. You'll have to provide a sufficiently warm environment for your jug, then, if you want it to make gas. Bear in mind, though, that methane—carelessly handled—can explode . . . and take suitable precautions in setting up your apparatus. I placed my mini-digester near the furnace and its gas collector bag about five feet away. Enough said.

Start your generator working with all its valves (clamps) closed and, after a couple of days, the water being "pushed" up the long arm of the manometer will indicate that some pressure is beginning to build in the jug. This first production is mostly carbon dioxide, which will not burn. (Test the gas by holding an ignited match at the tip of the burner and opening its clamp. The amount of gas in the manometer is sufficient for such a trial, although—as stated—the carbon dioxide will not burn.)

Continue the tests until a match held at the burner tip does ignite the escaping gas. This may take a couple of weeks or more depending upon the acid conditions of the slurry in your jug. (EDITORS NOTE: See the Gobar Gas article in MOTHER EARTH NEWS for further discussions of acid balance, carbon to nitrogen ratio, and other technical aspects of methane production.)  

Eventually, incorrect acidity levels will correct themselves and your model generator will begin to produce methane. When you're satisfied that such production is underway, open the clamp to the gas collector and you're in business. Methane production—depending on temperature—should last for from one to three months.

And what can you do with the gas? You can burn it off through the burner tip as a graphic demonstration that—by golly!—decomposed organic matter really does produce usable fuel. The quantity is too small for much else. To increase the pressure of the escaping gas (and, thereby, the spectacular nature of the resulting flame), place one or more bricks on the collector bag when you try this stunt. The manometer, of course, will faithfully indicate the pressure your gas reaches during such a demonstration.

Once the thrill of watching the flame passes, disconnect the collector bag, take it outside and expel the remaining methane. The residue left in the jug is an excellent fertilizer and you can use the liquid and some of the solids to seed your next batch of waste (and thereby hasten its production of gas).

Even though I haven't personally tried them yet, I can suggest a couple of refinements on the above experiment. If you have a fish aquarium heater available, you might try putting your jug in a bucket of water warmed by the element. This would be a significant improvement in maintaining the digesting slurry at optimum working temperature. You can also improve the burning qualities of the resulting methane by bubbling it through a limewater solution to remove carbon dioxide and passing it over ferric oxide (rust) to remove hydrogen sulfide.

Although the above experiment is imprecise and yields only a small quantity of methane, it will familiarize you with the digestion process and, possibly, encourage you to investigate (if you haven't already) the construction of larger-scale generators that will produce usable quantities of gas. The independent production of energy is a worthwhile goal.

Previous | 1 | 2 | 3 | Next

Post a comment below.


Brian Duvall
2/1/2009 5:03:29 PM
My 16 year old son Scott did his high school science project on maximizing methane production as a renewable energy source. You can see his actual experiment on www.youtube.com keyword "maximizing methane". It took second place in his category. Check it out. Gives me hope that our kids will figure out how to save the world one day.

7/3/2008 4:13:33 AM
We are alternative Power specialists, based in South Africa, and we are very eager to introduce alternative renewable energy options to the SA market. Are you able to introduce us to respectible importers/manufacturers of methane gas,solar,wind power generation products?

1/10/2008 5:16:12 PM

1/8/2008 6:03:55 PM
In the past I heard that in the future, methane would be produced off of your Septic tank. Do you have any experiments retrofitting 1000 gallon septic tanks for methane use? thanks Mom

9/24/2007 10:42:57 AM
I have an home experiment idea for the recycling of turning cat waste into fertilizer. I'm shredding newspapers for their cat litter. I can fill a large pressure cooker(never to be used for human consumption again) 3/4 full with the paper/cat waste mixture. Add water. Attach cooker lid. The lid will have a pressure gauge & thermometer and a copper tube affixed to the relief valve with the pressure set at 20lbs. I will blow up a black inner tube and set the cooker inside the hole of the innertub in the back yard where it will get lots of sun for heat. I'll check my methane tube perodically to monitor cooking. When methane production has ceased I will use the waste for fertilizer. If I can figure out how to capture, compress & bottle the methane then I will have a little homemade digester, turning unusable cat waste into a great fertilizer and I'll use the methane in a gas cylinder for outdoor cooking. I just need to figure out how to compress the gas to get it into the bottle. It may take me a few years to make a bottle of methane at this rate, but if all else fails I'll just burn the methane off so as not to release it directly into the atmosphere. I'm going to start this experiment next spring when it starts warming up again.

4/8/2007 5:02:02 AM
would it be possible to generate methane from the A & A WORM FARM SYSTEM (www.wormfarm.com.au)

Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.