Using a Mold Culture While Dry-Curing Meats

Microorganisms are a crucial part of dry-curing meats. Using a mold culture to get the process started can keep your meat healthy and plentiful.


| November 2015




The easiest and most recommended way of controlling the growth and species of mold on your dry-curing is through the use of a purchased mold culture.


Photo by sb-borg/iStockphoto.com

From the hills of Italy to the Spanish plains, dry-cured pork has been an essential (and delicious) food source for many cultures. In Dry-Curing Pork (The Countryman Press, 2014), Hector Kent explains the techniques and traditions of dry-curing in clear and accessible language. This excerpt, which explains the purpose microorganisms play in the dry-curing process, is from the Section, "The Art of Dry-Cured Meat."

All dry-cured meats are populated with an ecosystem of microorganisms, which are responsible for many of the characteristics of dry-cured meats. You may feel nervous about encouraging mold on a food that you’re ultimately going to eat, but if you want delicious dry-cured meats, you’ll need to embrace microorganisms as an important part of the process.

Without the use of chemicals to inhibit their growth, an ecosystem of mold, yeast, and bacteria will populate the outside of all drying meat. While yeast and bacteria are always present, and a salami relies on an entire ecosystem of microorganisms, mold is what you will spend most of your time managing on any piece of drying meat. As undesirable mold can be very toxic, mold management is an unavoidable part of the dry-curing process. Unwanted mold can be controlled through vigilant removal from the meat with a vinegar-soaked towel.

While you’ll usually find only a handful of different species of mold populating any piece of meat, the range of possible species is significant. Penicillium nalgiovense is the standard salami mold, with its growth easily promoted with a purchased starter culture, but it’s just one of 300 diverse molds found in the Penicillium genus. The Penicillium molds are a very important group, not just in dry-curing, but also in cheesemaking and the production of chemicals; perhaps most important, they are the original source of penicillin, the first antibiotic. Fortunately, Penicillium nalgiovense produces penicillin in such low quantities that the mold coating a piece of dry-cured meat is not a
concern to those with penicillin allergies.

Using a Mold Culture While Dry-Curing Meat

The easiest, and recommended way of controlling the growth and species of mold on your dry-curing is through the use of a purchased mold culture. The most common mold culture is Bactoferm Mold 600, produced by Chr. Hansen, which contains a freeze-dried culture of Penicillium nalgiovense. This culture will produce a traditional flat, white mold that, when applied correctly, will outcompete most undesirable molds. A healthy layer of desirable mold will also have the advantage of slowing the drying process, allowing for more flavor development. And it will contribute its own flavors, aspects of which you may recognize from other dry-cured meats and many cheeses. In addition to these influences, certain molds will reduce the acidity of the outside layer of salami.

Apply the mold culture to the meat after casing, but before any drying or fermentation has occurred. Follow the instructions of the manufacturer to rehydrate the mold in distilled water, and then apply the mold with a spray bottle or dip the meat into the culture. I recommend filling a wide and shallow baking dish with a thin layer of the rehydrated culture, then rolling the meat in the liquid. In a couple of days, this should produce a healthy population of white mold on the meat without wasting too much of the culture.





dairy goat

MOTHER EARTH NEWS FAIR

Aug. 5-6, 2017
Albany, Ore.

Discover a dazzling array of workshops and lectures designed to get you further down the path to independence and self-reliance.

LEARN MORE