Learn the simple process for canning tuna with this handy guide from the USDA.
Skip the store-bought stuff, and learn to can your own fresh tuna for superior quality and flavor.
Photo by Fotolia/ignatius44
Canning fresh seafood is a great way to keep delicious ingredients close at hand for future meals. In this helpful excerpt from the United States Department of Agriculture’s Complete Guide to Home Canning, you’ll learn the process for canning tuna safely. Use this and our other canning resources to keep your pantry stocked with fresh foods all year long.
The following is an excerpt from the USDA Complete Guide to Home Canning covering canning tuna.
Tuna may be canned either precooked or raw. Precooking removes most of the strong-flavored oils. The strong flavor of dark tuna flesh affects the delicate flavor of white flesh. Many people prefer not to can dark flesh. It may be used as pet food.
Note: Glass-like crystals of struvite, or magnesium ammonium phosphate, sometime form in canned tuna. There is no way for the home canner to prevent these crystals from forming, but they usually dissolve when heated and are safe to eat.
Procedure: Keep tuna on ice until ready to can. Remove viscera and wash fish well in cold water. Allow blood to drain from stomach cavity. Place fish belly down on a rack or metal tray in the bottom of a large baking pan. Cut tuna in half crosswise, if necessary. Precook fish by baking at 250 degrees F for 2-1/2 to 4 hours (depending on size) or at 350 degrees F for 1 hour. The fish may also be cooked in a steamer for 2 to 4 hours. If a thermometer is used, cook to a 165 to 175 degrees F internal temperature. Refrigerate cooked fish overnight to firm the meat. Peel off the skin with a knife, removing blood vessels and any discolored flesh. Cut meat away from bones; cut out and discard all bones, fin bases, and dark flesh. Quarter. Cut quarters crosswise into lengths suitable for half-pint or pint jars. Fill into hot jars, pressing down gently to make a solid pack. Tuna may be packed in water or oil, whichever is preferred. Add water or oil to jars, leaving 1-inch headspace. Remove air bubbles and adjust headspace if needed. Add 1/2 teaspoon of salt per half-pint or 1 teaspoon of salt per pint, if desired. Carefully clean the jar rims with a clean, damp paper towel; wipe with a dry paper towel to remove any fish oil. Adjust lids and process.