This handmade casket made at home is beautiful and inexpensive.
PHOTO: STEVE MAXWELL
Find out how to build a handmade casket using inexpensive wood for a low-cost, earth-friendly
Make a Handmade Casket Using Air-Dried Lumber
Back in 1995, I attended the funeral of a well-loved gentleman who spent his 85-plus years living in the same
modest country home where he grew up. He was a craftsman, skilled with wood, stone and soil, frugal as old-timers
often are and simple in his tastes. But when I went to pay my last respects, I thought I'd somehow walked into the
wrong funeral parlor. His coffin was huge, streamlined, made of shiny blue fiberglass and sporting more-than-ample
fake gold hardware. It looked like something designed in a NASA wind tunnel. I learned later that this
space-pod-to-eternity had cost $5,000, and that was the biggest shock of all. I couldn't have been any more
surprised if my old friend had leaped out of the coffin wearing a silver jumpsuit and sequined go-go boots.
But coffins don't have to contradict the life of the person whose body they contain. You can make a wooden coffin
yourself (or hire a woodworker) — it’s really very easy. Besides saving a bundle of money, making a
coffin can reflect and celebrate the life of a specific person, providing a reminder of happy things at a time when
sadness holds the upper hand. The best coffins are joyful epitaphs in wood. Several coffin plans exist in the image
gallery to help get you started on making a homemade casket.
Advanced woodworkers may want to build a coffin from solid wood, and the drawings in the image gallery
show you how to proceed. But if you don't have the tools or advanced skills to build the solid wood casket, you can
use hardwood veneer plywood, following the same coffin plans. Regardless of the approach you choose,
building a coffin is engaging, well within the reach of those with moderate skills, and a great way to be reminded
of the need to live well now. Take it from me, there's nothing like building your own casket to be
powerfully reminded of your own mortality.
I'm focusing on coffin plans with hardwood veneered plywood for two reasons. First, it makes this project easier
than using solid wood, opening the handmade coffin option to more people. It also eliminates the need for
equipment-intensive operations like milling and edge-gluing, while making the most frugal use of high-grade hardwood
forest resources. Veneered plywood also is widely available and economical compared to many sources of solid
If you build a coffin for a particular person, make the inside dimensions about 4 inches wider than the shoulder
span and 5 inches longer than standing height.
Building a Casket: Plywood Primer
Hardwood veneered plywood is made of thin slices of wood, including oak, maple, birch, ash or cherry,
that are factory-glued to a softwood plywood substrate. The product comes in 4-foot-by-8-foot sheets; you'll want to
use panels that are 3/4-inch thick.
The first thing to consider when making a coffin is material choice. Besides
selecting a species of hardwood veneer, you also need to think about veneer orientation. The casket plans show
what's called a "book matched" veneer pattern. Neighboring pieces of veneer are mirror images of each other, glued
to the plywood substrate side-by-side. Other options include slip-matched veneer (adjoining pieces oriented in a
repeating pattern), as well as random veneer orientations. Although most lumber suppliers stock some kind of
hardwood veneered plywood, you'll probably need to special order the particular grade, species and veneer style you
want to make the coffin with. Leave yourself time for this.
While you're at the lumber store, buy some matching veneer edging tape or
3/4-inch-thick hardwood planks for making edging strips and lid trim. Plywood edges should be capped with solid
Veneer tape comes in rolls that you cut to length and then glue onto the edges.
Solid wood edging strips are slightly more trouble to install but absolutely reliable.
Building the veneered plywood coffin involves five simple steps: cutting the
sides, ends and lid parts; applying veneer tape or hardwood strips to all exposed edges; joining the sides and ends
into a box; cutting and installing the bottom; then applying a protective finish. The difference between a good
coffin and a great one hinges on specific tricks you need to know at each stage, and the most important involves
basic cutting skills.
Despite the advantages, veneered plywood has one main weak point: The thin
surface layer of wood is prone to splintering if it's not cut with the right kind of circular saw blade. You can't
expect good results using the standard blades that come with most saws. Instead, look for blades made especially for
cutting veneered plywood or melamine-coated sheet goods.
You'll get the best performance if you put one of these on a table saw, though
that's not absolutely necessary. I know a professional cabinetmaker who built more than 300 projects for publication
during a 20-year period, all without access to a table saw. He used a handheld circular saw instead, following a
straight edge, to flawlessly cut all parts, including acres of veneered plywood.
Make a few practice cuts, then prepare the coffin sides, ends and lid parts.
Wait until later to cut the bottom. You'll get more accurate results if you cut it to fit within the assembled
here for plans to make a veneered plywood coffin.
Building a Casket: Edging With Solid Wood
(You can skip this section if you use glue-on veneer tape.) There are two kinds
of solid wood edges involved in this project: 1/4-inch-thick by 3/4-inch-strips for the sides and ends, and 1
1/4-inch-thick by 1 1/4-inch-wide bulldoze (rounded edges) strips to frame the lid of the coffin. In both cases,
success depends on two things: accurately cut strips and a smooth strip-to-veneer glue joint.
Make the strips about 1/32-inch wider than the actual thickness of the 3/4-inch
plywood. And hold them in place with masking tape if you don't have enough large clamps. Just keep one thing in
mind: The excess strip width must extend over both faces of the plywood, creating a slight lip where the two meet.
By making the solid wood strip wider than the plywood thickness, you lay the foundation for a smoothly sanded
Let the strips dry overnight, then sand them flush with the plywood using a
gently guided belt sander with a 120-grit belt or a random orbit sander with a 100-grit disc.
As you work, remember the veneer next to the solid wood strips is very thin
— less than 1/32 inch. Ugly wood and glue lurks underneath, so sand gently. If you wear through the veneer,
you'll ruin the whole piece.
Building a Casket: Corner Joinery
There are several ways to connect the sides and ends of a veneered plywood
casket. You can use 3/8-inch-diameter by 1 1/2- fluted dowels, No. 20 biscuits or the plug-covered screws shown on
the coffin plans. Screws are especially attractive for three reasons: They don't demand special equipment to
install; they act as their own clamps by drawing the sides and ends together; and they are ideal for caskets
destined to be shipped or stored unassembled. Few people have the space to conveniently store a full-size casket,
but the individual parts are easy to tuck away on a shelf or in a closet. The coffin plans show the two kinds of
tapered plugs you'll find at woodworking supply outlets: edge-grain and end-grain. Choose end-grain when you want
the plugs to stand out and edge-grain when you want them to blend in.
Immediately after bringing the sides and ends together, check that the overall
assembly of the coffin is square. Although you could use a framing square for this job, a better option involves
equalizing diagonal measurements. Measure diagonally opposite corners, then push or pull the assembled structure as
needed to bring them within 1/8 inch of each other.
Screw the sides together temporarily, and measure and cut the 1/2-inch plywood
bottom. Then glue and screw the sides together, and drop the bottom into the coffin before setting it aside to
You can lift the bottom of the coffin out later for finishing, though having the
bottom in place at this stage ensures the homemade casket stays square while it dries.
Building a Casket: Trim and Finishing
Moldings make an enormous difference to the look of any do-it-yourself casket,
and you'll see a few options on the coffin plans. As a general rule, put the largest moldings along the bottom,
smaller moldings under and around the lid, and the smallest profiles simulating frames on the sides and lid of the
coffin. Using trim frames in this way is especially valuable with veneered plywood construction. The veneers are
typically so perfect that they can look boring. Frames easily add visual interest to a handmade coffin.
Personalizing your coffin is one advantage of the handmade option. Two
possibilities are incised carving and laser engraving. Create a design or initials on a computer, then print them
out. Use rubber cement to glue the printed paper to your wooden coffin, then carve right through the pattern into
the surface using a sharp chisel or chip-carving knife. If you want something even easier, you can find businesses
offering laser engraving services. The inscription on the underside of my coffin lid was designed and produced 300
miles from my shop, then shipped to me for lamination with existing wood parts. The only hitch with incised carving
is that it has to be done on solid wood. Hardwood veneered plywood, however, takes laser engraving very
There are many ways to finish wood, but a penetrating oil or a wiping-grade
urethane makes a lot of sense with this project. I used Minwax Wipe-On Poly, though polymerized tung oil or Danish
oil works well, too. Just slather some on, then wipe off the excess after 10 minutes. Let it dry 24 hours, then
repeat the procedure three or four times and you are done.
You can add custom cushions to the interior when you make your own coffin, or
maybe simply wrap a favorite quilt around some bed pillows.
Contributing Editor Steve
Maxwell has been helping people renovate, build and maintain their homes for more than two decades.
“Canada’s Handiest Man” is an award-winning home improvement authority and woodworking expert.
Contact him by visiting his
website and the blog, Maxwell’s House.
You also can follow him on Twitter, like him on Facebook and find
him on Google+.
Read more about green funerals: Planning a Green Funeral at Home.