HOW TO TAN RABBIT HIDES

By Kathy Kellogg

Issue #79 - January/February 1983

By making and selling fur items, this homesteader is able to raise rabbits and enjoy free meat.

Like many modern homesteaders, I keep rabbits for meat. However, unlike most small-scale breeders (who consign their animals' pelts to compost piles), I also save the hides, tan them, and use the fur to make beautiful handsewn items. I've discovered that smallpelt tanning is neither time-consuming, difficult, nor expensive . . . in fact, it's a source of both pride and great satisfaction, since it enables me to create beautiful, useful fur articles from skins that would otherwise have been discarded.

You probably know that tanning (which is also called tawing or pickling ) is the process of converting a raw hide into leather, thus making the skin more pliable, more durable, and more resistant to water, wear, and decay. You may be surprised to learn, though, that home tanning costs very little and requires a minimum of equipment. In fact, you'll find that your biggest investments in the craft will be your time and energy.

The availability . . . convenient small size . . . and variable colors, patterns, and textures of rabbit skins make them perfect material for the novice tanner. Before I go into more detailed instructions for the procedures involved, bear in mind this important point: No tanning formula is foolproof. There are no shortcuts to learning this skill . . . you'll need to practice, practice, practice! However, I'm not a professional furrier. I'm only a homesteader raising some rabbits to help keep my family supplied with meat and extra cash . . . so take heart: If I can tan pelts, so can you.

BUTCHERING

As most breeders are already aware, once a rabbit has been killed and the head removed, it is suspended by one or both back legs to allow the blood to drain. Thus hung, the animal is then flayed, which is a term referring to the act of removing the hide from the carcass. To perform this task, simply cut the skin around each hind foot and carefully slit (or tear) the hide inside each leg from hock to anus (be careful not to slice into the meat). Strip the skin from the carcass by gently pulling downward toward the rabbit's head (the motion is somewhat like that used when peeling a banana but a bit more force will be required). Use your fingers or a sharp skinning knife to loosen any difficult spots.

The freshly flayed hide (which is known as a "green" skin) is now cased, or sleeve-pulled, to put the fur on the inside and the flesh on the outside. Let the cased pelt soak in cold water while you finish dressing out the carcass and storing the meat in your refrigerator or freezer.

WASHING AND COOLING THE SKIN

Once the butchering duties are finished, thoroughly rinse the hide in more cold water to finish cooling it as quickly as possible. Don't worry about any remaining fat and tissue at this point . . . rather, apply your effort to washing away all the blood left in the skin, since any that's not removed will leave permanent brown stains in the leather after tanning. (Soap or detergent is really unnecessary, but if you do use such a cleanser, be sure that all traces of that are rinsed out before you proceed, too.) With the rinsing done, carefully squeeze (never wring!) the excess water from the pelt.

As an alternative, you can clean skins in your washer (use the delicate cycle, if your machine has one), but there is a possibility that bits of fat and hair will plug up the drain hose. To avoid this problem, I prefer to handwash the pelts (which also gives me a chance to examine the furs closely).

Thoroughly cleaned hides can be preserved for later processing by freezing; drying on a stretcher, or salting and drying. I store my pelts in the freezer if I have more than I can comfortably work on at one time. Before freezing them, though, I make sure that all the body heat is cooled from the skins, and that the excess water has been pressed out . . . then I wrap the hides in freezer paper — or store them in airtight containers — to prevent dehydration and freezer burn.

(A hide can be opened up — that is, split from head to tail along the belly's midline — at any time during the tanning operation, but I prefer to wait until the process is complete to do this.)

THE FIRST TANNING SOLUTION

When the pelts are clean and cooled (or have been defrosted, if you've been sidetracked for a while), you're ready to begin tanning. You'll first need to round up a four- to six-gallon plastic container (a wastebasket or bucket will work fine). Then pour two gallons of room-temperature (about 70°F) water into the pail, and add either — but not both — of the following recipes. (Each formula will be adequate to tan six to nine medium-sized pelts.)

TANNING RECIPE NO. 1:
SALT/ALUM

1 cup of coarse or granulated salt ( not iodized)
1 cup of common alum (aluminum sulfate or any of several similar double sulfates), powdered or granulated

TANNING RECIPE NO. 2:
SALT/ACID

1 pound of coarse or granulated salt (about 1-3/4 cups)
1 ounce of full-strength sulfuric acid, or 4 ounces (1/2 cup) of battery acid (dilute sulfuric acid)

You can buy a five-pound sack of the necessary salt at almost any grocery store (look for noniodized pickling salt) for about $1.00. And larger quantities (usually 100-pound sacks) are available from chemical companies and other sources at "bargain" bulk prices.

Alum is stocked by biological supply companies, handicraft and leather shops, chemical suppliers, pharmacies, and feed stores. It comes in both a commercial and a medicinal grade (for tanning purposes it makes no difference which you use) and generally costs between $1.00 and $3.00 per pound.

Battery acid (electrolyte) is available from auto supply houses for about $1.00 per gallon (128 ounces) and is usually sold in five-gallon containers. (I've never worked with full-strength sulfuric acid, because I feel it's too dangerous.)

Both recipes work well and take approximately the same amount of time. I prefer the somewhat more expensive alum mixture because it produces a whiter, softer leather with the feel of fine suede.

Once you've determined which method you're going to use, add the chemicals to the water (don't let them splash) . . . and make sure the powders are completely dissolved before you add the pelts. Be certain to show respect for your chemicals and to handle them properly. (Wear rubber gloves if you're working with sulfuric acid.)

Now, drop each skin into the pickle (as the tanning mix is called) and swish it around with a wooden stick or spoon (or use your glove-sheathed hands) to work the solution into the fur and skin. Allow the pelts to remain in the brine — at room temperature (65-70°F) — for 48 hours, stirring them at least twice a day. If the pelts tend to float to the top of the solution, weigh them down . . . using a glass jug filled with water or a clean rock.

After the two full days have passed, squeeze the excess brine from the skins (save the solution . . . you'll reuse it later) and rinse them in cold water.

FLESHING

Fleshing is the process of removing the fatty tissue and flesh to expose the actual leather (or derma) to chemical action. Rabbits have a clearly defined undertissue which, after the first chemical soaking, can be peeled off in one piece (if you're careful). Since the flesh separates most readily at the rump section, I usually start there and peel toward the neck. A steak knife can be used to scrape and loosen the difficult areas you'll likely encounter on the belly and around the legs. Be careful not to peel too deep and expose the root hairs, but do try to get off as much fatty tissue as possible.

When you're finished, rinse the fleshed hides in cool water and then squeeze out the excess liquid.

THE SECOND TANNING SOLUTION

Now, go back to the recipe you chose before, add the same amount of salt/alum or salt/acid as you used in the first soaking solution to the reserved brine . . . and follow the same mixing procedure. Put the pelts in the liquid, one at a time, working each hide thoroughly to coat it with the pickle. Keep the skins soaking at room temperature for seven days, stirring them at least twice a day.

You can test for tanning "doneness" after the week's up by simply boiling a small piece of hide for a few minutes in water. If the leather curls up and becomes hard and rubbery, return the pelt to the solution . . . because a well-tanned skin will show little or no change in boiling water.

DRYING AND FLUFFING

After one pelt has tested "done", remove all of them from the solution and squeeze out the excess pickle. The tanning brine will likely be pretty much used up if you've soaked the recommended number of skins, but any liquid that does remain should be dumped out. Take care to discard the mixture where farm animals can't drink it and the chemicals won't contaminate drinking water. (Although it's not poisonous to handle, the brew might be fatal if taken internally.) I generally pour any leftover solution along pathways to keep them free of weeds.

Next, wash each pelt thoroughly with a mild detergent. I use an inexpensive cologne-scented shampoo that leaves the fur soft, fluffy, clean, and sweet smelling. Then rinse the hide several times in lukewarm water and squeeze out the excess liquid. Hang the pelts in the shade to dry (I usually put them on a temporary clothesline suspended over the bathtub). It'll take from six hours to two days for the skins to become fully dried, depending on the temperature, the humidity, and the thickness of the leather. (Don't ever put wet hides in direct sun or near a heat source, as they'll quickly shrink and become brittle as they dry.)

When the pelts are just barely damp, toss them in an electric dryer, with no heat, for 15 to 45 minutes. This step can be omitted . . . but the machine fluffing does make the fur easier to work with and the next procedure less difficult.

WORKING THE LEATHER

Ever since animal hides were first turned into leather, they've been pounded, rubbed, chewed, and beaten — and often annointed with grease or oils — to make (and keep) them flexible and soft. I stretch partially dried hides to soften the leather, using a process known as breaking the skin.

Pull the skin of your damp pelt in all directions, working only a small area at a time. The leather will begin to turn soft and white. The trick is to catch the hide while it's still slightly wet and limp. If it becomes too dry and turns hard, resoak it with a wet sponge (this is called damping back ) until it's pliable enough to stretch again. Be firm as you pull the leather, but don't use too much force, or you might tear it. Keep up the skin-breaking procedure as long as necessary . . , until the pelt remains soft as it dries. ("Broken" hides may be tacked to a board or frame to encourage them to dry flat.)

FINISHING AND STORAGE

After the hide has dried and is sufficiently soft, give the fur a good brushing with a small hairbrush. Then massage mink oil (I buy it at shoe stores . . . where an eight-ounce container, which is enough for several dozen pelts, costs about $2.00) into the skin side of the hide with your fingers. (You'll be glad to know that mink oil is a wonderful hand conditioner.) As a final — optional — step, try buffing the leather with pumice or fine sandpaper to give it a soft, velvety feel.

Rabbit fur, like all leathers, breathes . . . that is, it contains microscopic spaces for air circulation. Therefore, it's best not to store rabbit pelts (or any other fur or leather) in airtight containers (except, of course, when you're freezing them before tanning). I keep my finished hides in a cardboard box with a bar of sweet-smelling soap, which repels insects and helps to scent the furs.

SEWING RABBIT FUR

Working with thin leather — such as rabbit skin — isn't all that different from working with thick cloth. Therefore, any person who sews should have no great difficulty making the transition from fabric to fur.

The following list should serve to give you an idea of the variety of items an ingenious homesteader can craft with rabbit pelts: bedspreads, coverlets, robes, cushion covers, pillows, handbags, toys, hats, caps, hoods, mittens, baby bootees, vests, coats, capes . . . in short, the scope of your furs-titching projects is limited only by your imagination!

The first step in constructing any article of rabbit hide is to make (or buy) a full-sized pattern for each piece to be cut (the jacket shown in the accompanying photos was made from a purchased pattern). If you're not sure about the fit of the finished product, sew a muslin dummy and make any necessary adjustments to the sections before cutting into the pelts.

After you're satisfied with the size and shape of the pattern pieces, organize them on the skin side of the pelt. (For some articles you'll need to sew several pelts together to get a large enough section of "fabric". To do so, cut the pelts to be used into one or more squares or rectangles and stitch the blocks together. You can either make a large sheet of fur to accommodate all the pattern pieces, or combine just enough squares to fit one part of the pattern at a time.) You may need to rearrange the pieces several times to avoid objectionable bare spots and to make efficient use of the best sections of the pelt. Keep in mind that the thickest fur is found around the neck and in a band down the back.

Always lay your pattern with the grain (the direction in which the hair grows) so that the fur of the finished article will run in the same direction as it did when it was on the animal. (In the case of rabbits, the grain runs from neck to rump.)

Using tape, long pins, or small dots of rubber cement, attach the pattern to the hide. Trace the outline of each section with a ballpoint or felt-tip pen, or simply cut around each pattern piece. A razor blade or a utility knife might prove useful, since it won't snip as many hairs as will scissors. However, you can use sharp shears if you take care to avoid cutting more than just the skin.

Most soft leathers, including rabbit, can be sewn by hand using a glover's, leather, or furrier's needle . . . waxed nylon, linen, or heavy carpet-weight thread . . . and a running stitch, whipstitch, or cross-stitch. (Most good leatherworking books and sewing guides will include instructions for making these stitches if you're unfamiliar with them.) To hold the pieces together for sewing, use thin quilting pins, paper clips, or spring clips.

If you prefer, rabbit pelts can be stitched on a good sewing machine fitted with a No. 16 to 19 needle (some manufacturers market needles designed for leather) and all-purpose thread. The machine should be set to produce seven to nine stitches per inch.

Do follow the directions for assembly that come with the commercial pattern, whether you decide on hand or machine sewing. (Of course, you'll probably already know how best to assemble a project of your own design.) To flatten seams and hem edges, place a warm, damp cloth over the seam/hem line on the skin side, and pound the leather with a wooden mallet or hammer.

To finish your creation, brush the fur side well with a small hairbrush, paying particular attention to the seams (you may need to use a sharp object, such as a long needle, to pull out hairs that are caught in the stitching.

And what about the scraps? Well, find a use for them. You might try piecing odd bits of similar weight together to achieve a crazy-quilt effect. Or turn the leftovers into small pouches, flaps for purses and jackets, and other novelties. (For instance, I make little catnip-filled toys for my cats.)

Sewing with rabbit fur is an enjoyable, and often profitable, handicraft. In fact, I've actually discovered that the sale and barter of my fur items more than pays the cost of raising the rabbits . . . so the meat I get is free!

PREVENTING FAILURES

Although the procedure itself is simple enough, really successful pelt tanning is usually the result of ingenuity and perseverance. The secret is not so much the chemicals used as it is the elbow grease that you apply to make the hides soft and supple.

Keep in mind that each piece of leather is different. And even among hides that were all tanned in the same batch of solution, something will occasionally go wrong with one or more of the skins.

The problem I encounter most often is hairslip: bare patches that appear as the fur pulls or slips off the leather. This condition, which is also called taint, results from the growth of bacteria on the outer skin (decay) and usually occurs in folds and wrinkles, where the surface wasn't exposed to the tanning solution. It can be prevented if you stir the pelts around in the solution frequently and make sure that the liquid comes in contact with all parts of each hide. Take care, too, that the brine ingredients are dissolved and mixed well before adding the skins. Finally, don't store the pelts in the solution at temperatures over 80°. If hairslip does afflict a pelt or two, however, you can trim away the damaged sections when constructing garments or other articles.

ALTERNATIVE TANNING PROCESSES

The tanning technique I've described here is a simplified version of chemical tanning. (There are also vegetable and oil tanning methods, neither of which is well suited to preserving rabbit skins.) Most of the other chemical processes in use today would require additional equipment, extra labor, and complicated ingredients. In general, these systems involve the application of a paste or powder (common ingredients might include alum, acids, sodas, salts, animal brains and livers, oils, and vegetable tannins) to the fleshed skin. The substance must be reapplied several times over the course of a few days, with the residual material scraped off the hide before each new application.

Not only are such processes too timeconsuming to fit into the schedules of most busy homesteaders, but they also require the green hide to be fleshed before the application of the tanning agent . . . and the mere thought of spending hours scraping fat and tissue from a hide is enough to discourage most folks from even attempting to tan furs. The chemical method I've recommended, on the other hand, requires only a minimum of scraping, which can be accomplished within five to ten minutes.

NOW WHAT?

If you follow my instructions, you should be the proud possessor of a stack of soft, silky rabbit pelts . . . which you can either sell as is or fashion into beautiful garments and other items for sale or barter. (To learn the pros and cons of these options, take a look at the accompanying sidebars.)

All in all, rabbit-pelt tanning can add a whole new dimension to a homesteader's small-scale hare-raising operation. If you've even the slightest inclination to make full use of your backyard bunnies, just take a little more care at butchering time . . . and tan those hides!

THE COMMERCIAL PELT MARKET

I must admit that I am not, and probably never will be, a professional rabbit-pelt tanner! However, because some of you folks may be interested in marketing green or tanned pelts, I'll pass along what I know about the commercial market for them.

There is very little demand for young pelts (though a very limited number are used in the manufacture of felt). Even if the hide is in top condition, "baby prime" (from 8- to 12-week-old rabbits) isn't considered valuable to the fur industry. "Junior prime" (from animals up to five months old) is occasionally used, but "senior prime" (adult) is preferred.

One problem that any homestead rabbit-raiser with an eye to cracking the commercial market will have to face is that younger animals have small, thin pelts ... and most homesteaders butcher their rabbits for meat at 6 to 10 weeks of age ("fryer" size, with the cleaned meat weighing in at 2 to 2-1/2 pounds). I've reached a happy compromise between pelt condition and meat use by butchering my animals at 12 to 16 weeks of age, so that I obtain 3- to 4-pound "roasters" (which, to my way of thinking, taste even better than fryers) and get larger, thicker skins for tanning (although such "adolescent" fur is still not commercially desirable).

Another factor that must be considered is the seasonal cycles that a rabbit's hide goes through. The skin (leather) is often depleted of nutrients to grow the luxurious winter coat . . . while the summer pelt will have a thick skin, but thinner fur. Thus, for the commercial market, the best skins are taken from fully mature rabbits during the coldest months of the year. (However, I've found that I can use commercially worthless summer pelts for items, like moccasins, that require sturdy leather.)

What's more, all of the fat has to be removed from a commercial pelt, and the green or tanned hide must be dried on a wire stretcher or board and pulled in length as much as possible. (It's important to furriers to get every square inch of use obtainable from each pelt they purchase.) Any skins stored for sale should be sprinkled with naphthalene flakes to keep out any bugs.

Fur type and color are far more important to the fur buyer than to the homesteader. I raise, almost exclusively, mixed-color animals with "Normal" fur (which is classified as that about an inch in length, with a fine wool next to the skin and longer guard hairs). There's also "Satin" fur, which is about an inch or so in length, too, but intensely colored and lustrous because its hair shafts are thin and each is encased in a transparent shell. Another variation — probably the one most sought after in the fur industry now — is the "Rex" coat, which is short (about a half-inch), plush, dense, and soft . . . with guard hairs about the same length as the underfur. "Angora" fur, which is about three inches long, is more properly referred to as "wool", and is spun for yarn.

Most professional furriers require that a group of pelts offered for sale match in fur density and length and be of a uniform color. Therefore, rabbit breeders who are focusing on the commercial market should limit themselves to one or two colors of bunnies. (The most popular hues are chinchilla, castor, beige, seal, black, blue, and white.)

Generally, payments for pelts will average $5.00 to $8.00 apiece for prime Rex furs, and $3.00 to $5.00 each for Satin and Normal skins. However, the payment will fluctuate with the condition of the hide and the state of the ever-changing fur trade.

I strongly suggest that, if you're interested in marketing your rabbit pelts, you contact individual furriers who purchase tanned or green hides. Such folks can give you the best information on desirable fur types and colors, packaging, shipping, and rates of pay.

EDITOR'S NOTE: For information on raising rabbits, see MOTHER NO. 61, page 80 (turn to page 180 to order back issues).