Build a birdhouse for one of nature's most pleasant and effective garden-pest predators: the purple martin.
Purple martins are ideal garden neighbors, and these easy to build "apartment homes" are both easy to build and attractive to birds.
PHOTO: MOTHER EARTH NEWS EDITORS
Spring is on the way, bringing with it dreams of a bountiful vegetable garden — and nightmares of a summer spent battling bugs just to win eating privileges. This year, in addition to using the customary lines of defense against insect damage (such as companion planting, crop rotation, soil amendment and — when necessary — the application of organic pesticides), you might want to consider making your life easier by "hiring" some real professionals in the field: purple martins!
These huge swallows are ideal garden neighbors, not only because of their voracious appetites (one purple martin can consume 400 flies or several thousand mosquitoes in a single day, the equivalent of its own weight in flying insects!), but also for their beautiful song and their gregarious nature. Since purple martins seem to enjoy being near people and often favor man-made structures, it'd be worth the effort to try your hand at attracting the working warblers by learning how to build a birdhouse for purple martins and installing one or more in your yard.
Each complex is nothing more than a 27-inch length of 6-inch thin-wall PVC pipe (the plastic drain, waste and vent tubing sold in plumbing stores) that's capped at both ends and pierced with four 2 ¼ -inch access holes spaced vertically 4 inches apart — top edge to bottom edge — from each other. Lengths of 1/8 -inch coppercoated steel welding rod, bent to a modified W shape, slide into sets of 1/8 -inch holes (bored 3 ¾ inches apart and 1 ¾ inches below the lower edge of each access opening) to provide perches and support for the four ¼ -by-5 ¾ -inch plywood disks that serve as floors.
Building one of these garden-helper houses should take no longer than half an hour and requires little more than a hacksaw, two pairs of pliers, a ruler, a 2 ¼ -inch hole saw and a drill with 1/8-inch, ¼ -inch, and 5/16-inch bits.
First, temporarily slip the caps in place and position the four access holes — then drill the perch-bar holes and the single 1/8-inch screw hole. (Note that the lower and upper perches slide through the caps and the pipe, as does the No. 6-by- ¾ -inch screw.) With that done, remove the caps, drill the drain holes in the center of the lower cap and the bolt hole through the upper one, and install the floor flange and eyebolt. (You'll probably have to enlarge the flange's mounting holes slightly to accept the ¼ -inch carriage bolts.)
Next, bend the perch bars — starting from the center and working outward — using the dimensions indicated, but allow a little extra length in the top bar's center loop, since it must be bent upward at a 90-degree angle to catch beneath the screwhead. Finally, cut out the floor disks (it's a good idea to coat them first with paint or water sealant), and piece the house together, working from the bottom up.
Since purple martins prefer to nest high above the ground, you should either thread a length of pipe into the floor flange and slip it over a 10- or 15-foot mounted pole, or — to facilitate cleaning and the removal of nests built by intruding sparrows — suspend the house from a rope attached at one end to the eyebolt and threaded through a post-mounted pulley. Place the house in an open area as near to a body of water as possible, and your small investment should yield a great return in the form of reliable and "cheep" insect control!
With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.LEARN MORE