How to Make Homemade Paper

Image Gallery Five gallon plastic vat is filled with three quartz of pulp and cold water filled to within 3"".

HANDWORKS

To make pulp, look no further than your waste and recycling bins.

Although making paper is a common enough activity, few are familiar with the techniques involved. As a calligrapher, I was initially drawn to making my own paper so that I would be able to practice my art on interesting and unusual paper.

I'd never realized how simple the process actually is. You probably have most of the equipment already; what you don't have you can make. Also, in addition to creating beautiful stationery, I take pride in knowing that I'm helping to reduce waste in our throwaway society.

Marrianne Saddington

Waste into Pulp

Recycled-paper pulp can be made from tissues, computer paper, photocopier paper, wrapping paper, brown paper, note paper or envelopes — all used on their own or in combination. Tear the paper into pieces measuring approximately one inch square and soak in water overnight. The better the quality of the paper, the smaller you need to tear the pieces and the longer you need to soak them. For example, tissues can be torn into quite large pieces and soaked for only 30 minutes, while watercolor paper needs to be torn into pieces less than one inch square and soaked for two or three days. If you're in a hurry, pour boiling water over the torn paper and allow it to stand for an hour or two.

Place a small handful of wet, torn paper and two cups of water in a blender and blend for 15 to 30 seconds. (Thick cardboard or quality papers will take longer.) After a while, experience will tell you how long to blend different kinds of paper. Remember when first starting out, blend paper for the shortest possible time — just long enough for the fibers to separate. Stop the machine after 15 seconds and check; if there are still large pieces of paper visible, allow another 10 seconds and check again. If the pulp is too thick, add more water; do not dilute it too much or you will produce fine, fragile sheets that are difficult to work with. Don't worry about little bits that do not break down entirely; they will add character to the paper.

If you don't have a blender, beat the soaked paper strips into pulp by pounding them in a bucket with a thick stick or bottle filled with water. Although pounding the pulp is historically more authentic than using electric appliances, be forewarned: it is hard, time-consuming work.

After blending the pulp, pour it into a bucket or large plastic bottle until you have enough for several sheets. Figure that one load in the blender will make one thin sheet of 8 1/2" x 11" paper. A two-gallon bucket of pulp will make 20 to 25 sheets.