How to Tie the 10 Most Useful Knots

Whether it's a simple overhand or the more complicated sheepshank, here are ten useful knots to know whether you're homesteading, boating, or camping.
By the MOTHER EARTH NEWS editors
May/June 1979
Add to My MSN

Figure Eight Knot
MOTHER EARTH NEWS STAFF
Slideshow


Content Tools

Related Content

Sigg Under Fire for BPA-Lined Water Bottles

Sigg apologizes for BPA-lined bottles and offers a bottle-exchange program.

Do You Grow Flowers to Attract Beneficial Insects?

Readers report on the types of flowers they grow to attract pollinators and other beneficial insects...

Spring: Lots of Work To Do

Springtime brings cleaning up from the winter, starting a new garden and finishing up home-school wo...

Is a Wind Turbine Right for Me?

Figure out whether a home wind turbine is right for you by evaluating land for the best wind turbine...

Headin' back to the land (or making any move toward greater self-sufficiency) will, sooner or later, mean a return to the use of ropes. Without simple hitches (single ropes tied to objects) and bends (ropes joined together), loads fall off trucks, an expensive cow or goat escapes, a boat goes adrift, and hoisting hay from wagon to mow becomes a major problem.

Rope Rhetoric

However, before you start to learn down-home knotsmanship, a brief summary of rope vocabulary is in order.

Bitter End: The end of a rope that's being manipulated — also called the "working end."

Standing Part: the segment of the rope that you aren't using at the moment. It can be coiled, stretched, or otherwise left inactive.

Bight: a curve or arc in the rope. This can be a semicircle or a loose loop through which the working end may run.

There are over 4,000 hitches and bends used in special crafts, but — with the following 10 useful knots in your rope repertoire — you'll be able to handle just about any situation that requires you to fasten two objects together, secure one line to another, or tie a rope to a solid object.

As we go along, practice with ropes of your own until your memory has mastered these often essential knots.

The 10 Best Knots

1. Overhand Knot: This one is easy, just bitter end over and under the bight. The overhand is used as a temporary stopper to prevent a rope from unraveling or passing through a ring, eye, or pulley. It's also thee starting point for other knots, including the reef or square-knot.

2 Figure-Eight Knot: The figure eight is a better stopper knot than the overhand, because it's easier to untie after the rope has been pulled tight. Just form a bight with the working end over the standing part, run the bitter end under the standing part to form a second bight, then put the bitter end through the first bight. The result looks like a sideways numeral 8.

3. Square (Reef) Knot: Use this one to lash two objects together with one line, or to join two separate ropes. But take care — the reef knot will often slip under strain if the two ropes knotted together are of different diameters.

Actually, the square knot is simply two overhand knots—one on top of the other—with the second tied in the opposite direction from the first. When the knot is formed, the bitter ends and standing parts of each line will lie together inside the two bights. (CAUTION: A granny knot looks a bit like a reef knot, but the bitter ends will be on opposite sides of the bights from the standing parts. Beware of the granny: she's slippery and can't take a load.)

4. Sheet (Becket) Bend: You should use this knot to join two ropes of different diameters. It's much stronger and less slip-prone than the square knot, but can be easily untied no matter how wet and tight it may be. Just form a bight (big enough to work with) in the larger of the two lines. Run the working end of the smaller line through the loop, around the doubled heavier cord, back over its own standing part, then under the bight in the larger line. Always snug the sheet bend up by hand before you put any strain on it.

5. Carrick Bend: This knot is less well known than the reef or sheet bend, but it's stronger than either of them and just as easy to loosen, even after a sustained, hard pull. To tie it, just form a loop in one rope, with the working end crossing under the standing end. Then, pass the bitter end of the other cord beneath this bight, over the first rope's standing end, down under its working end, over one side of the loop, under its own (the second rope's) standing end, and — finally — over the second side of the loop. The carrick bend will require a good bit of practice before it becomes natural to you. However, if a "Best Bend" award existed, this tricky knot would be sure to walk off with the trophy.

6. Bowline: The purpose of the bowline is to form a secure loop in the end of a line. It can be tied swiftly and is easily loosened, even when it's under strain. Simply form a closed bight in the rope (leaving an ample working end, which will form the loop), bring the bitter end up through the bight, around the standing end, back down through the bight again, and pull the knot tight. One slight caution: The good ol' bowline — which holds with fair reliability in natural fiber ropes — may slip when tied with some slick-surfaced synthetic lines.

7. Clove Hitch: This hitch won't be secure unless there's a load acting on both ends of the knot, and should only be considered as a general utility hitch for temporary use. To make it, roll a bight around a pole, pipe, or post and then across the standing part. Next, make a second turn around the pole and pass the bitter end under the last bight. You can tie a clove hitch before you need it — so the hoop can be passed over a post, or the knot can be put in with a loop-the-loop operation (as over your pickup truck's cargo tiedown hooks) while tension is held on the standing part of the rope. It's a so-called "jam" knot, because the harder the strain it takes, the tighter the knot becomes, yet it can be slipped the second the stress is removed.

8. Timber Hitch: This knot is designed to roll around a tree to hold a temporary guy, to drag or winch a log, or to lift timber with a boom hoist. Just loop the bitter end of the rope around a tree, timber, or log, then turn it around the standing part, and twist it back along the bight for as few as two or as many as eight turns. (The more turns, the less likely the knot is to slip under strain.)

Any pull on the standing part will tighten the timber hitch and jam the turns of the rope against the surface of whatever is being lifted, dragged, or towed. When stress on the standing part is eased, the timber hitch can easily be unwound and released.

9. Taut-Line Hitch: Here's a handy knot for folks who work or play around high places. The taut-line hitch will slide up and down to provide a climber with freedom of movement, but—should he or she slip—it will tighten up and stop the fall short. This hitch is also the one used to securely tie a tarp to a stake.

Start this knot by throwing a rope over a branch (or whatever) so that two lines hang parallel to each other. The longer end—which extends down to the ground — is called (appropriately) a ground line. The other end of the rope should be looped (twice) through a ring in a special climber's belt, leaving a working end of about two feet in length.

Take this 24-inch tail and pass its working end around the ground line in a clockwise direction to form two complete tight loops, the second below the first. Then, form two more clockwise loops (also around the ground line) but at a point above the first two and with the difference that—each time the leading end is brought around the ground line to complete these coils — it must pass under its own bight. Hence, the complete knot includes four tight loops, side-by-side, around the ground line, and resembles four doughnuts on a stick.

Counting from the top downward, the loops of a correct hitch are tied in this order: 3, 4, 1, 2 ... that is, the top was the third to be tied, the second from the top was the last to be tied, etc.

In the complete knot, the leading end should remain sticking out 10 inches or so and should have a figure-eight knot tied to its end to prevent it from accidentally slipping through the loop of the taut-line hitch, should that knot ever become loose.

10. Sheepshank: This is a special-purpose knot that's useful when you have too much rope to conveniently handle a specific job but don't want to cut your valuable line.

To make the sheepshank, lay two long bights (in the standing part) side-by-side like a wide letter S, then secure both loops with half hitches. This knot can also be used to bypass an area in a rope that's been weakened by excessive chafing. You can just shake the knot loose when the strain is released.

There are any number of other knots you'll find just as useful as our "10 best," so don't stop once you've mastered these few starters. You can, for example, get into such colorful specialties as the fisherman's bend, cow hitch, surgeon's knot, wagoner's hitch, packer's knot, man-harness knot, fireman's-chair knot, scaffold hitch, barrel knot, and the boatswain's hitch.

So, get yourself a hunk of rope ... and knots to you!


Also check out The Forgotten Zeppelin Knot.


EDITOR'S NOTE: Instructions for the taut-line hitch were adapted-with the publisher's permission-from the book Tree Care by J.M. Haller (copyright ©1977 by Howard W. Sams & Co., Inc., Indianapolis , Indiana). 


Previous | 1 | 2 | 3 | Next






Post a comment below.

 

THEKILLER
12/16/2014 2:43:49 PM
GET I LIFE MAN

THEKILLER
12/16/2014 2:43:20 PM
ITS UNUSEFUL

THEKILLER
12/16/2014 2:42:16 PM
IT FRICKEN SUCKS

Michael Adler
4/15/2013 4:12:58 AM
ok, I found the diagrams. That helps a lot. I agree with another post about the taughtline. That's not a taughtline, but some other knot that serves a similar function. Also, I think the anchor hitch aught to be included in this list. I like Skip's suggestion of the trucker's hitch too - a very valuable knot.

Michael Adler
4/15/2013 3:54:22 AM
I usually like MoEarth News, but this article was terrible. Most of the article was trying to instruct knot tying with words and not diagrams. In addition, the words are insufficiently specific to correctly tie most knots with them. Thirdly, the selection of knots was terrible. I agree with another poster that the lark's head is more useful than probably five of the knots in that article. The sheet-bend is a terrible and useless knot that comes undone whenever you put tension on it. The carrick bend is confusing to tie, easily screwed up, and if you do it wrong it will fail. The clove hitch is inferior to the constrictor knot. I'm not much a fan of the timber hitch. The tautline description is an interesting variation, on the standard, but since there's no diagram, and the words are not specific enough, I can't tell what it's actually supposed to be like. Of note, however, the Boy Scout manual's method is inferior to the proper way, but I'd need a diagram to show you how. The sheepshank is also pretty useless. It left out many of the variations in the figure 8 knot, such as an 8 on a bight, a stopper knot, a three or two way equalizing 8, a figure 8 follow-through, also known as a flemish bend, which brings up the overhand follow-through, or water knot, which is the main bend for joining two flat ropes. It left out the double-fisherman's knot, which is the most secure way to join two round ropes, though it can become impossible to untie after being weighted. I could go on, but you get the point.

Skip_3
5/21/2007 9:22:19 AM
I think you should have included the Trucker's Hitch right after the Square Knot as it is one of the more useful knots in securing a load or tightening up a tent-line etc. that I know. I used it every two or three days when I lived on my boat to secure tarps against the wind and my dinghy to the deck. The best part of it is that it is not only secure against motion and vibration but that it is easy to tie and untie.

paul_51
5/13/2007 12:52:43 PM
1 length of rope over a branch, tie a bowline through a harness leaving along tail then tie a BLAKE HITCH over the standing rope. A friction hitch ascender with only one rope!!

Brian_22
5/11/2007 12:41:33 PM
With just a cursory glance I noticed two errors regarding these knots. First the two free ends of the sheet bend should emerge on the same side of the knot. The knot, as it is tied in the photo, is known as a left-handed sheet bend as is not as strong. Second, while the knot described as the taughtline may be perfectly well suited to the use as described, it is not a taughtline as recognized by the majority of knot tying sites on the web. A true taughtlin has only one loop (loop 3 in the photo) above the first two. Lastly, it should be mentioned that a reef (or square) knot should never be used to join two ropes if the rope will be subjected to any significant load. It is a binding knot, not a bend.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.