We have a small flock of chickens and designed a chicken waterer from a recycled 5-gallon plastic bucket.
Using a fine-toothed narrow-bladed handsaw, we cut a horizontal half-moon hole on each side of the bucket, starting one-third to halfway up from the bottom of the bucket. The hole is about 8 inches wide and 6 inches high. The water stays clean despite the chickens’ tendency to scratch all around it, and it is easy to rinse and refill. We also saved and reused the lid; this was an added bonus.
Elias W. Keim
Fultonville, New York
Empty plastic kitty litter jugs also can work very well as containers for poultry water and feed. — Mother