A Guide to Buying Lumber

A guide to buying lumber. A lumberyard is a hard place to go window-shopping. It pays to know what you want before you get there.
By the MOTHER EARTH NEWS Editors
July/August 1987
Add to My MSN

Diagram of hardwood lumber thickness standards and softwood lumber dimensions.
MOTHER EARTH NEWS STAFF
Slideshow


Content Tools

Related Content

Restoring a magical woodworking machine

The challenge of refurbishing an ingeniously designed 30-year-old combination woodworking machine wa...

Are You Ready for Flea Market Season?

Apartment Therapy's smart, comprehensive guide to the best summer flea markets and salvaging spots n...

Make Your Pond Happy

Ponds serve many purposes that add an economic or recreational value to the landowner. If you own a ...

Autumn at the Sawmill

The first bite of frost brings a frenzy of activity.

This guide to buying lumber helps the regular homesteader understand what wood is best to purchase. (See the hardwood and softwood diagram in the image gallery.)

A Guide to Buying Lumber

Wood sawn from trees by section and sold by dimension is known as lumber. This wood is available as softwood (cut from needle-bearing conifers like pine, fir, hemlock, cedar, redwood) and hardwood (sawn from deciduous, or leaf-bearing, trees such as oak, maple, walnut and cherry). There are two methods of mill sawing. The most common is plain, or flat, sawing, in which cuts are made tangent to (they follow) the tree's growth rings, yielding a face-grain board. Quarter-sawing, a somewhat less economical method, entails making cuts perpendicular to the growth rings, and produces straight-grained wood with better warp resistance.

All lumber is sized and priced by its rough mill-sawn dimensions, but the finished product may be reduced in size by up to one-third after the surface-planing process is complete. Hence, a nominal 2 by 6 measures only l½ inches by 5½ inches in actual dimension.

A piece of lumber less than 2inches thick and from 2 inched to 16 inches wide in nominal dimension is a board. Boards less than 6 inches wide are called strips. Dimension lumber used for framing work is between 2 inches and 4½ inches thick and up to 16 inches wide. Timbers measure at least 5 inches on any surface. Normally, lumber is available in lengths between 6 feet and 20 feet in standard 2 foot multiples.

Lumber is sold by the board foot, each unit being equivalent to a rough board measuring 1 inch thick, 12 inches wide and 12 inches long—144 cubic inches of wood all told. Wood less than 1 inch thick is counted as a full inch, and stock over 1 inch is figured by the next larger ¼ inch. Thus, an 8 foot-long 1 by 6 contains four board feet ... as does a strip measuring 1-3/8 inches by 2 inches by 16 feet. To figure board feet, multiply thickness by width in inches, then multiply by length in feet and divide by 12. Often, retail dealers sell lumber by the lineal, or running, foot which is the standard practice for moldings and other factory-shaped wood. Discount houses even sell by the piece, to make shopping easier.

Wood is graded according to quality, which is determined by the size of the board and the number and significance of defects such as knots, checks and shake, pitch pockets and wane (rounded edges). Both hardwood and softwood are further graded by intended use, which takes species, structural integrity and appearance into account.

Softwood

Softwood grades exist for both construction and remanufacture use. Lumber for remanufacture is supplied exclusively to industry and is divided into shop grades, industrial clears and specific product stock. Construction lumber is for consumer use and is broken down into three general categories:

Stress-graded includes typical framing members, and timbers, posts, decking and stair stringers. This "American Standard" lumber must meet the criteria of the National Grading Rule.

Nonstress-graded includes yard lumber and wood used for general building purposes, such as boards, battens, lath and planks. The boards are known as commons and are separated into five different grades depending upon the species and the lumber manufacturing association concerned. No. 1 grade has tight knots and minor blemishes and is used for paneling, shelving and finish work; No. 2 has larger knots and noticeable blemishes and is suitable for flooring and rustic paneling; No. 3 has knotholes and visible flaws and is good for sheathing and fencing; No. 4 is a low-quality board with adequate strength for subflooring and concrete forms; No. 5 is the lowest grade of board, used for crating because of its appearance and limited strength. Some species, such as Idaho (western) white pine, are graded by name (colonial, sterling, standard, utility and industrial), but because of differences in species characteristics, grade numbers and names are not always interchangeable.

Appearance lumber is nonstress-graded but is visually appealing and is suitable for working, shaping and fine finishing. Most appearance, or "select," grades are noted by letters and are separated into three categories. Grade B & Better allows only a few minor surface imperfections and is chosen for superlative finish work; C Select is the most readily available and has limited defects, which makes it suitable for quality trim and cabinetwork that use a natural finish; D has surface imperfections that can be covered with paint. A certain number of species are graded by number and description (1 and 2 clear) and others use names (prime, supreme, choice and quality).

Hardwood

Hardwood lumber is graded in three categories: factory, dimension parts and finished market products. Only factory grades concern us, because they're based on the proportion of a piece that can be cut into usable pieces, or cuttings, which are divided further into three project grades:

Firsts and seconds (FAS), a combination of the two best cutting grades, is limited to boards whose poorest side yields at least 83% clear wood. All first and second boards must be at least 6 inches wide and 8 feet long.

Selects, quality project wood with the good side equivalent to an FAS board, must be at least 4 inches wide and 6 feet in length.

No. 1 common, or "shorts," is the lowest grade of project hardwood. Boards must yield at least 66% clear wood on the poor side and can be no less than 3 inches wide and 4 feet long.

Note that hardwood comes in random widths, with specified minimums assigned by grade. Standard lengths range consecutively from 4 feet to 16 feet. Hardwood is sold as rough (unplaned) or as S2S (surfaced on two sides—top and bottom). Thickness is measured in ¼ inch graduations, from 1 inch to 4 inch, and expressed as a fraction ... so a 5/4 board is nominally l-¼ inches thick.


Lumber Grade Stamps

Nearly all grade stamps, with the exception of those used for heavy timbers, include at least the following elements: 1. Certification mark: Indicates the association or agency responsible for inspection at the mill.2. Mill identification: The company name, logo or assigned mill number. 3. Grade designation: The grade name or abbreviation, sometimes indicated by number. 4. Species identification: Indicates an individual species or the species group. 5. Seasoning condition: Specifies the moisture content at surfacing; S-DRY indicates 19%, MC 15 means 15% and S-GRN is unseasoned lumber over 19%. (See the hardwood and softwood diagram in the image gallery.)


Previous | 1 | 2 | 3 | Next






Post a comment below.

 








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.