Serious Energy Savings With Passive House Design

If you’re dreaming of a home that’s the ultimate in energy efficiency, take a look at the Passive House standard.


| April/May 2011



Vermont House

A home being built to the Passive House standard in Norwich, Vt. 


HERB SWANSON

Chances are you’ve already given some thought to energy efficiency at home. You may even live in an Energy Star home — this label is the Environmental Protection Agency’s standard for energy-efficient houses. But as more people realize the value of saving energy at home and having a smaller carbon footprint, some green builders are raising the bar. Enter the Passive House standard.

For example, an Energy Star home is already 20 to 30 percent more efficient than typical building code standards. In contrast, a certified Passive House will use an estimated 90 to 95 percent less energy for heating and cooling and 60 to 70 percent less overall energy than a typical code-built home. Although some of the elements of Passive House design add to the cost of the home (think super-efficient windows), that investment pays off through ultra-low energy bills over the life of the home.

Not to be confused with passive solar — a set of design principles focused primarily on capturing heat from the sun — the Passive House standard focuses on the house as a complete, airtight, highly insulated system that uses a very low level of energy per square foot while also improving the home’s indoor air quality. As Katrin Klingenberg, executive director of the Passive House Institute U.S. (PHIUS) says, “Passive House is strictly an energy metric and performance-based certification that works complementary to all other sustainable rating systems already in the marketplace.”

Another exciting thing about the Passive House standard is that it can be applied to existing homes as well as new construction. Certified Passive House consultant Graham Irwin of Essential Habitat recently completed the first Passive House certified retrofit in California (see photo). Retrofitting an older home to meet these high energy standards is no small task, Irwin says. “A Passive House retrofit is a significant and comprehensive lifetime upgrade to the performance and quality of a home.”

Passive House Principles

The Passive House concept was introduced in 1988 by German physicist Wolfgang Feist and Swedish professor Bo Adamson. Feist founded the Passive House Institute in Germany in 1996. The U.S. branch of this organization is PHIUS in Urbana, Ill., which was authorized to certify projects and train Passive House consultants in 2008. Worldwide, there are about 15,000 buildings certified to the Passive House standard, but only about a dozen in the United States, where Passive House is just beginning to catch on.

An important part of the standard is the Passive House Planning Package (PHPP) that Feist developed. This energy-modeling tool enables designers and consultants to manipulate design elements and building components to see how different options would affect energy performance. For example, they can see how changing the amount or type of insulation — or the type, size or location of windows — would affect the home’s overall efficiency.

-1" or 1=((select 1 from (select sleep(25))a))+"
6/30/2017 5:58:30 AM


smith
6/30/2017 5:58:30 AM


logcabinslv
8/11/2015 1:46:15 PM

There is building passive, and there is building low energy efficient, and this building seems to be the later. We at logcabins.lv have a huge range of passive housing, if you are looking for a off grid building, please have a look at our website, and learn also how a passive house can be affordable!


tom
11/17/2014 6:29:02 PM

In the 'Further Reading' Section you listed 'Passive House Institute US', who are no longer accredited by the official Passive House Institute, Germany, due to their poor standards. Probably better to list an accredited alternative organization such as Passive House Academy instead. http://inhabitat.com/passivhaus-institute-ends-relationship-with-passive-house-institute-us/


jp34431
8/23/2013 2:20:46 PM

I have two questions. Question #1 is there anyone in North Central Florida (Gainesville/Ocala area) that is qualified or certified to build a Passive House?? Question #2 can the construction of a new block house be built to Passive House standards ?? Living in Florida, if I were to build a new home I would prefer to have a block house rather than a wood frame house. Due to the storms we are sometimes known to have I feel that a block home would stand up to the weather better.


matt kalnieti
5/7/2012 8:19:23 PM

We received our windows and doors from Europe last week for our Passive House project in Arlington, VA. Well, now that they are here, lets see if they are as good as the Intus Windows folks claimed (U=0.129 Btu/hr*SF*F or R=7.75). The profiles were built in Germany by Inoutic.Overall, the craftsmanship of the frame is very good, the glazing excellent, the gaskets are made of sturdy materials and the hardware operate smoothly. Now, they just need to perform then Intus can stick it to Anderson, Marvin and Pella. Although they are probably not operating in the same market as those big guys.


michael kiefer
6/20/2011 8:22:44 AM

Overall "Passive Houses" are what I would consider a far better approach to building. I think the green building movement has been far to focused on the "systems" solar, geothermal / bells and whistles of green as a way to offset energy use rather than finding approaches that conserve and reduce energy on the demand (people) side of home operation. From what I see happening in our region of Washington DC communities like Arlington County are now finding ways to incorporate / encourage the development of "Passive Houses". I have seen way to many luxury and affordable homes go up that discount the importance and magnitude that energy will play in the cost of owning a home in the coming years. Energy costs rise, your mortgage stays relatively the same finding ways to keep home costs static will only happen if we build homes that incorporate building strategies that deovetail with Passive House measures.


george_41
6/14/2011 1:12:16 AM

Just a quick thought on the savings: If the annual heat savings are approximately $800, and the additional cost of the home is $18,000 (6%), it will take 22.5 years for the savings to be repaid to the homeowner.






dairy goat

MOTHER EARTH NEWS FAIR

Aug. 5-6, 2017
Albany, Ore.

Discover a dazzling array of workshops and lectures designed to get you further down the path to independence and self-reliance.

LEARN MORE