Rustic Coat Rack From a Tree Branch
Make a coat rack from a tree branch to bring the warmth and charm of natural wood into your home in a creative, functional way.
By Chris Lubkemann
August 19, 2010
 |
Get outdoors, find some wood and make something beautiful! “Tree Craft” includes 35 earthy-yet-elegant woodworking projects, such as kitchen utensils, photo frames, table lamps and a coffee table.
COVER: FOX CHAPEL PUBLISHING
|
The following is an excerpt from Tree Craft: 35 Rustic Wood Projects That Bring the Outdoors In by Chris Lubkemann (Fox Chapel Publishing, 2010). You can tap the splendor of the outdoors easily and practically by crafting these woodworking projects that are at once rugged and artful. Using some found twigs, branches or fallen trees and a few basic tools, you can create Lubkemann’s unique, striking pieces for your own space. This excerpt is from Chapter 3, “Living.”
RELATED CONTENT
Keep moisture away from wood with this wood drying rack. Originally published as "Cordwood Cover" i...
Use a found tree branch and some basic tools to craft this simple, rustic coat rack. Nothing adds m...
Despite the proliferation of power tools in recent years, hand tools are still an important part of...
There is a profound satisfaction in simple living, but of course it isn’t necessarily easy to achie...
This rather large and heavy coat rack is intended to be well-anchored to a wall. You definitely don’t want to attach it to a panel of drywall with a bit of Plasti-Tac or a few strips of double-sided sticky tape! Serious screws or bolts are required, so find a stud in the wall. After it’s up, it will hold a pile of coats.
MATERIALS AND TOOLS
Hardwood branch
Strong board
Lag bolts
Handsaw
Pocketknife
Sandpaper
Clear finish
Hammer
Hand-held power drill
Twist bit to match lag bolts
Bit to countersink holes
INSTRUCTIONS
1. Choose your branch. Make sure you use a hard wood, such as maple, oak, dogwood or apple.
2. Trim off all of the little knots and branches that you don’t want serving as coat pegs.
3. With your saw, trim off all of the ends of the branches that remain — the ones that will be serving as pegs.
4. Round off and smooth the ends of all of the peg branches. Spray on a clear finish, if desired.