How to Make Wooden Tools

The author was able to replace a lot of costly and inferior implements when he taught himself to make wooden tools.
By Steve Levine
May/June 1980
Add to My MSN

PHOTO 1: Work your froe into your log or block of raw wood with the froe mallet. PHOTO 2: Tap your froe until its upper edge is even with the wood's surface, twist the handle toward (or away from) you, pound the froe down the crack when the wood separates. PHOTO 3: Clamp the wood either in a shaving horse or a vise and whittle the slab down with a drawknife. PHOTO 4: Draw the contours of the tool you're making so you'll have a guide to follow. PHOTO 5: Complete final contouring and smoothing of your wooden tool. 
PHOTOS: STEVE LEVINE


Content Tools

Related Content

Toys for Tots

Create memorable gifts for a youngster with a handcrafted toy or game.

Meringue Science: Perfecting the Egg White Foam

The network of proteins in egg whites lends itself to a miraculous transformation to egg white foam,...

Maple Field Milk: I'm Back

Did anyone ask if you wanted your milk to be homogenized?

The World Wastes Half Its Food!

A new report released at World Water Week in Stockholm last Thursday states that nearly half the wor...

Breaking the handle off a brand-new tool — especially if the piece of equipment is one you just shelled out hard-earned cash for — can be an irritating experience. Sadly enough, the old plaint, "They just don't make 'em like they useta," applies to wooden products at least as well as — if not better than — it does to the bulk of today's mass-produced plastic and metal contraptions. It seems as if the subtleties of wood grain, texture, resiliency, and pliancy are well beyond the capabilities of "modern" mechanized manufacturing. It's no wonder, then, that quite a few folks are taking a couple of steps backward in time and learnin' to "whittle" out their own wooden tools and utensils. I, for one, have found that — whether I make a spatula or an axe handle — not only do I assure myself of top-notch quality by "doin' it myself," but I can save (or even earn) a few dollars while I'm at it. As a matter of fact, though I started shavin' just for the fun of it, my hobby ended up turning into a part-time profession. Yours could, too!

Now just because the wood-shaving craft goes back a ways, don't think it's some ancient art form shrouded in mystery. As you'll find out, this large-scale form of whittlin' is no more than the next logical step beyond timber chopping! With a little woodsy know-how, and a few basic tools, you'll be turning out "sculpture" in no time at all.

Wood Choice

The first and most important rule of thumb in selecting your shavin' wood is to choose freshly cut green specimens. Such sappy wood is far easier to slice than the dried variety, and doesn't tend to crack in the wrong direction. ( Stay away from lumberyards! Commercial lumber is almost always dried, frequently in a kiln, and may not have been sawed with the grain of the wood.)

Of course, the best (and least expensive) way to get your timber is to choose and chop it yourself. Such "foraged" lumber might come from your own woodlot or from the castoffs of power or telephone line clearing crews. But wherever you get your raw materials, be sure to pick a tree that's suited to the task you've assigned it: Don't whack down a 20"-diameter walnut tree to make an axe handle when a 7-8" hickory tree will probably (if the tree is straight enough and long enough) do the job.

The type of wood you select will depend largely upon what's growin' in your neck of the woods. You might consider using white oak for utensils and tools (since it's easy to work with and resistant to rot), and hickory for handles (because it combines strength and hardness without being brittle)... if such species are readily available to you.

Shavin' Tools

Your shopping list for shavin' implements will be limited to (beyond the backcountry essentials of an axe, wedge, and sledge) a froe, a froe mallet, a drawknife, and a spokeshave. A froe is a cleaving knife with a 12-15" cutting edge and a handle that protrudes from the back of the blade at a right angle. Its companion, the froe mallet, is formed from the heart of any one of a number of different hardwoods, and is used to "plant" the froe in the grain of the wood.

Once you've used the froe to cleave your wood into an appropriately sized block, you'll need a drawknife in order to do the shaping. The drawshave (as the tool is sometimes called) also has a 15" blade, usually gently curved, with handles set at the perpendicular . . . one to each end of the blade.

When the drawknife has done its job, you can finish shaping your wooden object with a spokeshave. Such smaller carvers come in a variety of cutting shapes (from straight to half-round), and employ, an adjustable blade depth (much like the! feature found on a safety razor).

But before you take this list and head for your local hardware store, be forewarned: The salesperson will probably give you a blank look. Like so many of the tools (and skills) that helped to shape this country, wood-shaving implements have been relegated to the dusty walls of old woodsheds. You'll have to patrol auctions, flea markets, and/or antique shops to equip yourself.

Shavin' Method

Step 1: Once you've selected your hunk of wood—and made the initial (major) splits with a wedge or maul—the froe and froe mallet will help you to cleave the crude piece closer to the size you need. (One small froe splitting trick I've learned is to place a small indentation where you want the cut. That way the froe is less likely to bounce out when you belt it with the mallet.)

Step 2: Tap your froe into the end of the log until its upper edge is even with the wood's surface. Then twist the handle toward (or away from) you. When the wood separates, simply move the froe down the crack and twist it again.

Step 3: Once you've reduced your rough-hewn material to approximate size, firmly clamp the wood either in a shaving horse (as shown in the photo), a wood vise, a metal vise (lined with scrap lumber to protect your creation) . . . or any similar clasping contrivance you can dream up. Then begin working the slab down with a drawknife. When using this particular tool, move it diagonally—as you pull it toward you — to help peel away smooth layers.

Step 4: When your progress with the drawknife takes your creation close to a recognizable form, it's a good idea to mark the shape of the future tool on the surface so you'll have a pattern to conform to. Later—when you've achieved an artist's freehand confidence—you can allow your whim to determine form.

Step 5: Do the final smoothing and contouring of curves with your spokeshave (easy does it . . . don't try to take off all the wood with one pass). An arced, single-adjustments-crew spokeshave will be right for some jobs, while others may do better with a a half-round or a straight spokeshave. (If your budget limits you to one of these "trimmers", I recommend a straight edge. The flat blade will do most any job that one of the other shapes can accomplish, although some chores will require a little more effort.) Whichever blade shape you choose, remember that a spokeshave will work well only if you keep the edge sharp and evenly adjusted to the cut depth necessary to smooth out your working surface.

When you've finished your practical sculpture, you're bound to feel a greater sense of accomplishment than if you'd bought the item. Furthermore, because you bothered to work with the wood and embellish its finer points, your handwrought equipment will last a darn sight longer than would its store-bought equivalent. And the effort you put into the device will give you a whole new respect for your wooden utensils and tools . . . I'm willing to bet you're going to take good care of 'em!

Sources on Shavin'

After finishing a couple of woodshaving projects, you just might find yourself interested in learning more about woodcraft. I've read all of the following books and found them not only enjoyable, but nearly indispensable.

A Reverence for Wood and Museum of Early American Tools, both by Eric Sloane (Ballantine).

CountryFurniture by Allan A. Watson (New American Library).

Country Woodcraft by Drew Langsner (Rodale Press).

Foxfire 1-4 edited by Eliot Wigginton (Anchor Books).


Previous | 1 | 2 | 3 | Next






Post a comment below.

 








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.