Don't throw out your old jeans if the denim is still good in places. This reader used the material to make a Thermos bottle carrier.
Size the denim sleeve to a good diameter for your bottle, turn it inside out, and sew the interior side and bottom seams.
MOTHER EARTH NEWS Staff
I'd be embarrassed to say just how many Thermos bottles I've dropped and destroyed over the course of the years. And I've often wondered why more of these insulated drink containers don't come with their own handles. Eventually, however, I came up with my own solution to that little oversight: an attractive bottle carrier made from old jeans. In fact, merely one leg of a pair of discarded denims will do the job!
First, fit your Thermos bottle inside the leg (loosely) and cut away the excess length and width, making sure you allow enough material for a seam. (At this point, you can personalize your creation-to-be with an appliqué or embroidery. See Sewing Patches for Pleasure and Profit for tips.) Next, cut a 2" x 10" piece of material for a strap. Fold it, lengthwise, into fourths, enclosing the raw edges. Then stitch down the folds, attach the strap to the carrier, and sew it firmly in place.Now, it's time to sew the seams along the side and bottom. (Restitch the bottom for extra strength, and overcast all seams so the sack can be tossed into the washing machine without raveling.) Finally, hem the top edge and you're all set. You’ll have a tough little carrier that can go anywhere you go with little chance of mishap.
With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.LEARN MORE