DIY Outdoor Furniture
This step-by-step guide shows you how to assemble DIY outdoor furniture from materials found at your local hardware store.
By Christopher Stuart
The following step-by-step guide to crafting Jesolo Sunbeds is an excerpt from DIY Furniture (Laurence King Publishing, 2011) by Christopher Stuart. Stuart features 30 designs by leading designer-makers from around the world. Each start-to-finish guide to make-it-yourself furniture shows you how to easily assemble furniture from common materials. With this excerpt on crafting DIY outdoor furniture, you will learn how to make a sunbed.
You can purchase this book from the MOTHER EARTH NEWS store: DIY Furniture.
Cristian Urban for Recession Design
The design for the Jesolo Sunbed was the designer’s response to the basic concept of mobility and utility. Based on a wheel hand trolley with wooden slats that fold away, the sunbed is both easy to transport and simple to understand. By adding a notch in one of the corners its functionality is furthered, creating the perfect holder for your bag while you rest. A Velcro strap can be added to secure the panels while wheeling the sunbed to your favourite location.
The sunbed gets its name from the town near Venice where the designer was born and where he spent part of his youth on the beach with his friends. The project reminds him of those times: ‘For me the design of the bed is a project that is part of my best years, it is the place of the sun’s journey of love but also to say goodbye. The sunbed at the beach has always conjured up the idea of a holiday which was then enriched with a broader meaning that is the discovery of life. The seascape, the sun, the beach, the beauty and youth that is soon gone. That memory of a sunset on the beach and being kissed by a last ray of sunshine.’
You will need:
• Hand trolley with two 260mm diameter pneumatic wheels, capacity 200kg
• Two wooden handles that fit the over frame. Beech is recommended.
• Two brass piano hinges 20x500mm (parts C)
• Wood panel 25 x 1210 x 1210mm. Fir or birch plywood recommended.
• 28 screws, 24 to attach the hinges, 4 longer screws to attach the frame to the plywood. These need to be long enough to go through the frame and into the board about two-thirds of the way.
See Also From This Book: Build a Table: A Step-by-Step Guide to DIY Furniture
Reprinted with permission from DIY Furniture: A Step-by-Step Guide by Christopher Stuart and published by Laurence King Publishing, 2011.