DIY

Hits and misses of DIY projects, both big and small.

Add to My MSN

More Than One Hammer

1/16/2008 12:00:00 AM

Tags:

You've heard it before: Choose the right tool for the job. If you have only one hammer, you probably need more. Here's a quick overview of several types of hammers and how they're used.

A claw hammer is the first hammer that comes to mind when you hear the word. One side of the head is used for driving nails; the other side is a curved V. You can wedge the head of a nail into this V and pry the nail out of wood.

Framing hammers are slightly larger and heavier than a claw hammer. The face of the head (the part that meets the nail) is rough so that it's less likely to slip off a nail. The extra weight and size makes driving larger nails (used for building walls and roofs) more efficient.

For smaller nails like those used for attaching trim or joining corners of picture frames, you can use finish hammer. These are smaller, lighter versions of claw hammers.

Ball-peen hammers are generally used for mechanical and metal projects. Instead of a 'claw,' one end of the head is rounded like a ball. You might use a ball-peen hammer for removing (or creating) dents from metal, tapping bearings onto an axle, or pounding a metal punch.

For heavy-duty work, sledge hammers are the best choice. Smaller sledge hammers (3 or 4 pounds) might have a shorter handle so you can manage them with one hand. These hammers are appropriate for driving small stakes, some metal work, etc. Heavier sledge hammers (16 pounds or so), have longer handles so you can get a more powerful swing and be more accurate in your aim. These hammers are great for demolition, pounding posts, and ringing bells at county fairs.

Many times, you'll want a softer touch. In these instances, use a rubber mallet. These are great for tapping hub caps into place without denting them. You can also use them on wood when making joints.

There are other less common types of hammers, too. If I've overlooked your favorite, you can tell us about it in the comments section below.



Related Content

Make a 3-Legged Stool

Make a 3-legged stool with simple materials like concrete and wood scraps to achieve chic DIY seatin...

DIY Clothes Rack

Use basic plumbing parts to make this DIY clothes rack.

Great Web Sites for DIY Projects

Whether you’re looking for plans for a shed or trying to figure out why your water heater isn’t work...

DIY Solar Heating with the Heat Grabber

Build this DIY solar heating collector, the Heat Grabber is a "window box" solar collector you can f...

Content Tools




Post a comment below.

 

Rita_1
7/29/2008 9:57:17 PM
I have a hammer collection also. I have a mason's hammer. I use it to knock off the old mortar from bricks which I harvest from razed buildings. In my area, there are many buildings made with brick which have no holes in them. I have used them for pavers to build paths around my property. Unfortunately, the old brick around tends to be fairly soft. Some of my first paths are worn and have character.

Salix
7/1/2008 2:32:37 PM
Hey Troy -- I like your hammer selection, but I would definitely add the cross peen to the list. I like the 3-pound cross-peen (sometimes called an engineer's hammer) for use with cold chisels and for whacking steel on some welding project. I also have a 4-ounce cross peen that comes in handy while tweaking some setup chucked in the metal-working lathe. The most unusual hammer I own is a shoemaker's hammer. I used it to drive tacks and rivets in leather working. The ball-peen hammer is also useful for setting rivets the old fashioned way. You can use the flat face to drive the nail through a rove or bur, and the ball to mushroom (peen)the end of the nail up tight against the bur.







Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.