Soothing Indirect Lighting

In less than an hour's time, and with an investment of only $5.00 or so, you can make an indirect lighting fixture that casts a soft, comfortable glow.
By Mark Jordan
March/April 1983
Add to My MSN

An indirect lighting setup the author installed in a bedroom.
Photo by Mark Jordan


Content Tools

Related Content

Shine Your Light Now

Take a few of these lighting suggestions with you from the 2005 Lighting for Tomorrow competition sp...

Counting Your Chicks after They've Hatched

A lesson learned in not counting your chickens before they're hatched

30 Minute Mozzarella

You can easily make homemade mozzarella in 30 minutes or less!

How Do You String Wiring Through SIPS Panels?

When you build with structural insulated panels (SIPs), wiring isn't as much of a challenge as you m...

"Bounced" light, because it produces less glare and softer shadows than does direct lighting, can be both attractive and restful. And you may be surprised to know that an indirect lighting setup can be built to suit any room. Better still, you don't need advanced carpentry skills, a fat wallet, or endless hours of free time to do the job. In fact, my entire house is now illuminated with homemade units, and each of the fixtures required less than five of my dollars, and no more than an hour of my time!

Furthermore, even though my lights are rather rustic in appearance (in keeping with the rest of my home's decor), there's no reason why yours can't be as decorative as your talent and budget allow. You could, for instance, substitute a sanded and painted (or stained) board for my rough-sawed plank, a decorator chain for the knotted rope I used, and attractive plant hooks for the simple utility hangers that support my fixtures.

Begin the project by cutting a 1 x 6 (or 1 x 8) board of your choice to a little less than the length of the wall you plan to illuminate. Then install a series of surface-mounted lamp holders (they're available in plastic or ceramic, and with exposed terminals for easy wiring for less than a dollar apiece at many hardware stores) along the back of the plank, at approximately 3-foot intervals.

Now, simply run your No. 18 lamp cord from socket to socket, as shown in the Assembly Diagram and Materials List (you will, of course, have to bare the wire where it attaches to the terminals) and secure it with staples.

Once you've hooked up the last of your series of lamp holders, leave about 12 feet of wire (you'll later want to check the distance to the nearest outlet), attach a plug to the end of the cord, and then install an in-line switch at a convenient height.

With the basic assembly completed (already!), you can rig up a support system. My knotted-rope arrangement required that I drill two pairs of holes spaced about one-fifth of the board's length from each of its ends. (If you decide to develop an alternative method, keep in mind that the plank should hang about 6 inches down from the ceiling, and the same distance out from the wall.)

Then I knotted one end of each of two 20" sections of 1/4" rope, threaded the lengths through the pairs of holes in the board (with the knots on the visible side), and tied off the working ends. Be warned: you may have to retie the loops a couple of times before the plank hangs level. However, once the hooks are fastened to the ceiling (I secured mine to plastic toggle bolts) and the fixture is suspended to your satisfaction, the lamp will be ready to plug in.

You really ought to give this simple project a try. After all, the investment is well within reason, and I'm convinced that you'll find the soft illumination really enjoyable whether you're thumbing through yet another seed catalog or reading the latest issue of MOTHER EARTH NEWS.








Post a comment below.

 








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.