How to Design and Build a Knife

How to design and build a knife with a bone handle, including shaping, instructions, diagrams, heat treating, polishing, and sharpening.


| April/May 1996



Building a knife 1

1. Rough shaping blade on grinding wheel.


PHOTO: MOTHER EARTH NEWS STAFF

First lessons in the Old-Time cutler's trade. Design and build a knife using these step-by-step instructions. (See the homesteader's knife photos in the image gallery.)

How to Design and Build a Knife

A minor but sudden and distant family emergency had me rushing toward a boarding gate at Boston's Logan Airport, a few essentials hurriedly thrown into a suitcase, and still wearing old jeans, field boots, and Levi's jacket. I emptied my pockets on the conveyor beside the metal detector and walked through the arch without setting off any alarm that I could hear. But suddenly I found myself surrounded by uniformed cops with little radio-phone-plugs in one ear. Feeling like a perplexed Harrison Ford falsely accused in a movie mystery, I had to produce ticket, boarding pass, IDs and all before learning that I was suspected of trying to board a civil aircraft carrying a lethal weapon.

"Lethal weapon?" I said. "You mean the knife?" My pocketknife was sitting beside keys, loose change, and assorted country-pocket junk on the conveyer.

A cop reached for the knife with a latex-gloved hand and nodded grimly.

But "I ... I live ... in the country" was all I could say. I showed them my hands with their assorted scars, a couple of finger-ends lopped off by farm machinery, and purple urchin spines under the skin from when I skin-dived after conch and rock lobster in the Caribbean. "Its not a weapon;" I said. "Its a tool. I use it to do everything;" and I started describing how I'd been splicing up a rope halter and lead for my daughter's new pony when called away.

Fortunately, one cop had been raised on a Connecticut truck farm and another's grandfather was a retired fisherman out of Newport, Rhode Island. Both understood how essential a knife is in life outside the city limits. So I was shortly on my way in time to make the flight ... knife back in my pocket.





Crowd at Seven Springs MOTHER EARTH NEWS FAIR

MOTHER EARTH NEWS FAIR

Sept. 15-17, 2017
Seven Springs, PA.

With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.

LEARN MORE