Homesteading and Livestock

Self-reliance and sustainability in the 21st century.

Add to My MSN

HOMEGROWN 101: How To Make Cold-Process Lye Soap

7/22/2011 10:01:16 AM

Tags: cold, lye, process, saponification, soap, Farm Aid and Homegrown.org

By Caroline, HOMEGROWN Flock-tender

At first glance, the art of soapmaking seems that it should be left to the chemists in a lab. By chemical definition, soap is the salt of a fatty acid, a triglyceride, which are three molecules of fatty acids attached to a single molecule of glycerol (glycerin). The bars we use for cleaning are simply animal or vegetable oils treated with a strong alkaline solution called lye (sodium hydroxide). Lye catalyzes the saponification process, the hydrolysis of fats into free fatty acids, which then combine with alkali to form crude soap. The liberated glycerin by-product is either left in the soap or collected, depending on which soap-making process is used.

  Soap
 

(Photo by Type F)

Have I lost you yet? Because I’m a bit confused myself … Let’s break down the soap-making process and start scrubbin’ with homemade bars!

There are three basic batch processes that can be used in soap-making at home: the cold-process, the semi-boiled process and the fully boiled process. Each process is defined at the temperature in which the saponification reaction occurs.  Soap can also be made through the melt-and-pour and rebatching processes, where pre-made glycerin bars are melted down, colors and additives are added, and they are then molded

Here is a more detailed explanation of the different soapmaking techniques.  Let’s focus on the old-fashioned cold-pressed lye soaps:

Cold-Process Lye Soaps  

PROS: 

-More control over your ingredients to create unique recipes

-Soap is made from scratch

CONS: 

-Lye must be stored and handled safely

-Numerous materials and tools are required

-More time-intensive

-Lye to fat rations must be computed to ensure a mild product using saponification charts and lye calculators

This is the process most often used by artisan and hobby soapmakers.  The glycerine by-product is not extracted from the soap, and the reaction takes place over many days, even after the soap has been molded.  The remaining glycerin works as a moisturizing agent and keeps the soap soft.  Handmade cold-pressed soaps often use excess fat to consume the lye, which is known as superfatting.

While the reaction takes place mostly at room temperature, some heat is reaquired to get the saponification going.  The temperature of the batch is raised enough that the fat being used is completely melted, and is kept warm after mixing to ensure that the lye is completely used up. 

The cold-process requires exact measurements, using saponification charts to be sure that the finished soap product does not have excess hydroxide or unreacted fat.  Also, the use of the alkaline substance lye, can be potentially dangerous.  Lye has a pH of 13, meaning its can cause chemical burns and is highly corrosive.  Things to keep in mind when handling lye:

  1. Always add lye to cold water to dissolve (it may contain ice); and never the reverse – it is combustible when wet!
  2. Always use plastic or stainless steel containers with lye
  3. Keep your skin protected with sleeves and gloves
  4. Use powdered lye or granules
  5. Keep vinegar and milk handy in case of burns.  Eyes can be doused with milk and vinegar applied to skin in event of an accident
  6. Never inhale fumes
  7. Store lye in a cool, dry place with good ventilation and CLEAR labeling

The first step in soap-making is to dissolve the lye in cold water – half of your water can be ice!  The oils are then melted.  Oils/fats can be animal or plant-derived.  Animal fats include lard or tallow, and vegetable oils include avocado, coconut, olive, castor, palm, peanut, soybean, sweet almond, jojoba, and kukui nut.  See this saponification table for more information. 

Once both the lye and oils have cooled to about 100-110 degrees Fahrenheit, and are no more than 10 degrees Fahrenheit apart in temperature, they are combined and stirred with a stick blender, until trace is achieved.  Trace refers to the point at which the fats and oils have mixed with the lye.  When trace is achieved, the soap appears thick and viscous.  Trace is affected by the heaviness of the fats used; heavier fats speed up the trace process.  Mixing method also affects trace.   When essential oils and additives are added depends on the viscosity of the additives - light, medium, or heavy trace  (essential oils, fragrances, herbs, oatmeal, and others are added at a light trace as the mixture starts to thicken).  Check out these recipes!

 

(Photo by Soap Queen)

The batch is then poured into molds and kept warm by wrapping the molds in blankets or towels, and left to continue saponification process for another 18 to 48 hours.  Milk soaps do not require insulation, which may cause the milk to scald.  The soaps may go through a gel phase before finally hardening.  Most soaps are ready to be cut and used after the insulation process, but it is safer to let the bars harden for another few weeks (2-6) before use. 

More information on cold-process lye soap making:

 

 



Related Content

Herbal Cold Remedies Using Thyme

Harness the healing prowess of disinfectant, immunity-boosting thyme with these natural remedies for...

Let's Make Some Soap: A Simple Recipe for Lye Soap

Making a batch of homemade soap for family use can be done quickly and simply.

Country Lore: Freezer Cold Frame

If you have an old chest freezer, you can make a cold frame and start your seeds early.

Catching Colds and Flying on Planes

Catching a cold after flying is common. Find out why plane travelers get sick after flying, and lear...

Content Tools




Post a comment below.

 

daffydill
7/27/2011 10:37:05 AM
NEVER, EVER, EVER use aluminum pans for making lye soap, and I speak from experience here. I was with friends at a homesteading demonstration who decided to use aluminum, rather than their usual glass, pans. The lye combines with the aluminum and you get Aluminum hydroxide - it doesn't make soap - It remained liquid and when they tried to dispose of it got it on their hands. All I had close by was a can of Coca-Cola, but I poured it over their hands and it was enough to get them to a full washing area and keep the burns from getting too bad.







Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.