Build this DIY child’s footstool for a cute and easy project to help furnish a little one's room.
This DIY child's footstool makes a great project for those who like rosemaling or tole painting.
Photo courtesy Lark Books
John A. and Joyce C. Nelson provide 150 easy, quality projects for any home in The Big Book of Weekend Woodworking (Lark Books, 2005). In their 60th book, the Nelson’s include their favorite projects for all levels of craftsmen. The following child’s footstool project, featured in this excerpt, is one of many accessories available to liven up any youngster's room.
Buy this book from the MOTHER EARTH NEWS store: The Big Book of Weekend Woodworking.
This footstool makes a great project for those who like rosemaling or tole painting. It should be made of a hardwood so that it will hold up under all conditions.
1 Seat — 3/4 x 8 3/8 — 10" Long
2 Legs — 3/4 x 6 1/2 — 5 5/8" Long
1 Brace — 3/4 x 1 7/8 — 6 7/8" Long
8 Screws — FL. HD. — No. 8 — 1 1/4" Long
Transfer the patterns to the wood, and cut them out. Note the two, parallel 15 degree cuts on the top and bottom ends of the two legs. Drill holes and countersink in the top and legs for the eight No. 8 screws.
2. Screw the stool together to check all fits, and make adjustments as necessary. When everything is all right, take the assembly completely apart again.
3. Using a router equipped with a 1/8 inch-radius cove-cutter bit that has a ball-bearing follower, cut the outer edge of the top, the lower edge of the brace, and the outside edges of the two legs, as shown in the exploded view.
4. Apply glue and screw the stool together. Check that the stool is sturdy enough for all conditions.
5. Finish this charming footstool as you desire.
For more projects from The Big Book of Weekend Woodworking: Read DIY Early Wall Box.
With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.LEARN MORE