DIY

Hits and misses of DIY projects, both big and small.

Add to My MSN

Hit the Deck!

10/5/2007 12:00:00 AM

Tags:

When I built my deck several years ago, I used 2-by-6s instead of the typical 1-inch decking. And because of some bark left along the edges of the planks, I put them on the deck 'upside-down.'

If you look at the growth rings in the end of the planks, imagine that you're looking at the end of the log before it was sawn into boards. Which broad side of the plank would have been closest to the bark? When you use the planks on a deck, you want that side facing up. If you put the boards on the deck the other way (like I did), they'll have a tendency to 'cup' or slightly curl.

This is a bad thing on a deck surface, because cupped planks are less likely to shed water, which can shorten the life of the deck. (By the way, this isn't such a problem for quarter-sawn lumber, but it would be very unusual to use quarter-sawn lumber for decking because it's more expensive.)

Partly because of my poor design, but also due to natural weathering, it's time to refinish my deck. I started last week by cleaning the deck and wetting it with plain water. Then I sprayed it with a mild acid cleaner made specifically for this purpose. The acid removes mold and thoroughly cleans the surface of the deck. After working the acid into the surface with a stiff brush, I allowed it to work for about 40 minutes before thoroughly washing it off (again, with plain water).

My plan was to stain the deck after two or three days as recommended by the manufacturer, but we've had intermittent rains, so that hasn't happened yet. If this keeps up (I'm not complaining; we need the rain), I may have to use the acid wash again prior to staining the deck.

More updates next week.



Related Content

A More Efficient Way to Build a Fire

An Illinois reader has devised a way to build a fire in a fireplace that is more efficient than the ...

Stain Your Deck So It Lasts

Download Steve Maxwell’s free list of tested and approved deck stains that have worked well in field...

DIY Solar Heating with the Heat Grabber

Build this DIY solar heating collector, the Heat Grabber is a "window box" solar collector you can f...

MOTHER'S Fluorescent Tube Solar Collector

Here's a design for an 83% efficient solar collector that uses old fluorescent tubes. Originally pub...

Content Tools




Post a comment below.

 







Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.