A High Amperage PV Charge Controller

Reader inquiries about accommodating high amperage systems led our author to design this slightly modified version of his PV charge controller.
By T.J. Byers
September/October 1984
Add to My MSN

Circuit diagram for the high amperage PV charge controller.
Illustraton by MOTHER EARTH NEWS Staff

Content Tools

Related Content

Peace Farms and Old Appalachian Barns

Talking about Annie Upshure and the Catholic Workers Movement and how Peace Farms moved into Appalac...

Running With the Bulls (or in my case, Heifers)

Cam has an exciting evening when his neighbor drops off another expectant cow.

LED Bulbs Contain Lead and Arsenic, Study Finds

A new study warns that energy-efficient LED light bulbs contain potentially hazardous metals. Some l...

The Benefits of Highland Cattle Genetics

The American Highland Cattle Association is funding a Highland beef research study on fatty acid pro...

In Build a Solar Charge Controller, I told you how to build a battery-charge controller that can handle the output of one or two photovoltaic panels (up to five amps of current). Since that article appeared, a number of readers have written to ask if the circuit could somehow be modified to handle high amperage systems. The answer is yes! And here's how to do it.

Starting with the completed PV charge controller (as detailed in the article, but with R8 changed to 470 ohms), remove the jumper wires on the right side of the component side of the circuit board. This will free the relay (RL1) contacts from the current path, allowing the existing relay to be used to control a higher-rated relay. This new switching device must have a 12-volt coil and must be rated for the current your system will produce. (A hint: The series resistor — Rs — quenches the electric arc that limits the auxiliary relays, so the device you choose can be rated at 150% of capacity; a 10-amp relay can do 15-amp duty).

The value of Rs will also have to be adjusted to suit the size of your system. As a rule of thumb, Rs should limit trickle-charge rate to about 1% of battery capacity. For example, a 100 amp-hour battery would get by with a 2-ohm, 2-watt  resistor, but a 500 amp-hour battery would need a 0.4-ohm, 10-watt resistor. In action, the diode D 1 will also have to be upgraded for higher current. Schottky diodes are the best for this application.

The original 5-amp charge controller is perfectly suitable for small photovoltaic systems, and was specifically designed to use readily available components. The circuit, however, is applicable to much larger arrays, and if you're willing to seek out a relay and a diode with higher ratings it should handle the job competently and reliably.

Post a comment below.


4/9/2007 5:43:50 AM
How can I obtain a copy of the article detailing the original low current charge controller? Mother responds: here is a lilnk to that first article - http://www.motherearthnews.com/Homesteading-and-Self-Reliance/1984-03-01/A-Photovoltaic-Battery-Charge-Controller.aspx  

Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.