You can make the curved tube for a simple cold frame with this easy-to-build tube bender.
This tubing bender can form the hoops for a cold frame.
PHOTO: TOM HYNES
I considered building MOTHER’s tubing roller — used in building the framework for a backyard greenhouse — until I considered the safety of my fingers while using the roller.
So I built a much simpler tubing bender from a pallet and some scrap wood. It worked just as I hoped it would, and I had 20 hoops formed in 25 minutes. I just clamped one end of the tubing to the pallet and manually bent the tube around the arch. It was a whole lot safer, too!
With more than 150 workshops, there is no shortage of informative demonstrations and lectures to educate and entertain you over the weekend.LEARN MORE