Repairing and Replacing Fence Posts

Fence-building and home improvement expert Jeff Beneke explains the process of repairing and replacing fence posts that have decayed or rotted.


| February 14, 2014



shims in the footing

Drive shims into the footing on all four sides of the post.


Illustration by Melanie Powell

Good neighbors make good fences and good fences require good planning, materials and construction. The Fence Bible (Storey Publishing, 2005) acts as a reference to construct and repair any fence that might be right for your property, with an explanation of project options and detailed step-by-step instructions from fence-building and home-improvement expert Jeff Beneke. The following is excerpted from chapter eight, “Repairing Fences and Gates.”

You can purchase this book from the MOTHER EARTH NEWS store: The Fence Bible

Correcting Footing Failures 

If the posts have loosened or fallen out of plumb, it is likely due to a problem with the footing or backfill. Concrete footings can crack or heave, and a tamped earth-and-gravel footing can soften over time. A failed concrete footing is hard to repair, and the best solution is to replace the fence post and footing. You can tighten the hold of an earth-and-gravel footing by digging out as much of the backfill as you can, replumbing the post, then backfilling and tamping. You might also try fastening pressure-treated shims to all sides of the post before backfilling and tamping.

If a concrete footing seems secure but the post has shrunk away from the concrete and loosened, drive pressure-treated shims into the concrete on all four sides of the post, checking for plumb as you do so. When the shims are tight, trim them level with the concrete and run a bead of clear silicone caulk around the top to seal the joint. This may not provide a long-term solution, but it can buy a few more years.

Mending fence posts that have decayed

Rotted posts can be replaced, with new posts being set in new footings in the same location as the old ones. But on some fences, this can be a challenging job that requires a lot of work and threatens the strength and integrity of the rest of the fence. In that case, it often makes better sense to try and reinforce the old post with another, partial post.

davethompson
2/23/2015 5:32:54 PM

My fence in my backyard has started to come loose. Turns out the footings are to blame for the wobbly fence. I took your advice on how to fix this problem by driving pressure-treated shims into the concrete, and that seemed to work. Is this a permanent fix or just a temporary one? http://www.aaaconcreteak.com


mark
11/18/2014 3:05:50 PM

Try this easy method to replace rotted fence posts without digging - http://tophandymantips.com






dairy goat

MOTHER EARTH NEWS FAIR

Aug. 5-6, 2017
Albany, Ore.

Discover a dazzling array of workshops and lectures designed to get you further down the path to independence and self-reliance.

LEARN MORE