Garden Bench Plan: Build This Handy, Lightweight Bench

Every garden needs a bench, and this portable, durable seat will take you just half a day to construct and will last for many gardening seasons.
From the editors of Storey Publishing
August 9, 2010
Add to My MSN

“The Vegetable Gardener’s Book of Building Projects” contains more than 35 projects that will enhance the efficiency and quality of vegetable growing, as well as the pleasure of spending time in and around your garden.

Content Tools

Related Content

Five Tips for Getting Started With the Vegetable Garden Planner

Contributing Editor Barbara Pleasant provides tips to help users get the most out of the new MOTHER ...

Make A Rustic Headboard Bench

You can make a simple bench for the garden or patio by recycling an old headboard.

Help a Small Organic Gardening Company Grow

An interview with the founder of a small organic gardening business that focuses on education and he...

Cutting Your Trees Into Your Own Lumber, Part 2

This is a brief description of how to stack lumber so that it dries evenly after sawing. Also descr...

The following is an excerpt from The Vegetable Gardener’s Book of Building Projects (Storey Publishing, 2010). For a fraction of the cost of buying retail, this book will show you how to build handsome, handcrafted items that will encourage your vegetables to thrive, extend your growing season, or simply offer a place to relax among your plants. Each project is functional, attractive and easy to complete. This excerpt is from Chapter 2, “Building Projects for Harvesting and Preserving.” 

With a handhold cut right into the edge of the seat, this lightweight bench is easy to tote around to different sections of the garden. When constructing it, drawing the curved cutting lines is handily done by tracing around a CD. Just be sure to double-check your measurements — they need to be precise for the pieces to screw together properly.


1” x 12” mahogany (8’ length) 

Eighteen 21/4” stainless steel trim-head screws
Four 1 5/8” stainless steel trim-head screws

Tape measure
Carpenter’s square
Wood saw
Power drill
1/8” twist drill bit
3/8” spade drill bit
Driver bit to match screws


Cutting the lumber. From the 1-inch-by-12-inch, cut one 29-inch length for the aprons (A) and rip it in half lengthwise, resulting in two 29-by-6-inch apron pieces. Also from the 1-inch-by-12-inch board, cut one 30-inch length for the seat (B), and two 17 1/4-inch lengths for the legs (C). Use an old CD as a template to cut the openings for the handholds in the seat and aprons and the shaping at the bottom of the legs, as shown in the cutting diagram.

Constructing the bench. Connect the legs (C) by attaching the aprons (A) on either side. There should be a 2 1/2-inch overhang on each end. Next, center the seat (B) atop the leg assembly, and fasten it to the tops of the legs and (see diagram).

Builder’s Tips

  • When predrilling the screw holes, use a one-eighth-inch drill bit, then fasten all the pieces with 2 1/4-inch trim-head screws — but use 1 5/8-inch screws for the four seat corners to avoid hitting the screws in the apron boards.
  • When creating the handhold in the seat, use a three-eighths-inch bit to drill a starter hole for the jigsaw blade.


Reprinted with permission from The Vegetable Gardener’s Book of Building Projects, published by Storey Publishing, 2010. 


Post a comment below.


2/25/2014 4:05:39 AM
I tried a lot but my jigsaw ruined it all. Now i am planning to purchase from Cool idea by the way.

8/17/2010 9:44:35 AM
The total length of 1x12 board needed is 93.5" ..... you added another 29" (the 29" for the apron board that gets cut (ripped) in half.... (2)6"x29" boards equals (1) 12"x29" board)

8/17/2010 1:39:44 AM
Check your math. I got 93.5 inches.

8/11/2010 12:23:46 PM
The use of an 8’ board may not be correct. If you add up everything you need to cut, it seems to add up to around 122.5”. An 8’ board is only around 96” or am I missing something?

Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.