Mother's Full-Sheet Cutting Table

This combination workbench and cutting table solves a number of problems with one design.
By the MOTHER EARTH NEWS editors
March/April 1985
Add to My MSN

In the up position, it's a cutting table.
Photo by MOTHER EARTH NEWS Staff
Slideshow


Content Tools

Related Content

Is Long Hair the Answer?

Should we all just grow our hair longer to save money on barber and hairdresser visits, or is cuttin...

Are You Ready for Flea Market Season?

Apartment Therapy's smart, comprehensive guide to the best summer flea markets and salvaging spots n...

Don’t Be Bamboozled by Bamboo Fabrics

The Federal Trade Commission has announced that some bamboo fabrics are actually made of rayon. Four...

Barnheart: Yearning to be a Farmer

If you have a constant, overwhelming urge of wanting to be outside breathing in the fresh air and pa...

Unless you're fortunate enough to have a roomy, permanent workshop, you probably have to satisfy yourself with a corner of the garage or basement when it's time to tinker. And there's nothing wrong with that. But if you find yourself cramped for work space on a more than occasional basis, the maneuvers required in setting up shop for each project — then clearing everything away when the task's complete — can get to be downright irksome.

That's why, when the problem of the crowded workshop nagged at our staffers just once too often, a few of them put their heads together to design the space-saving multipurpose workstation you see here. The project started, simply enough, as a nifty little plywood-cutting jig designed and submitted to us by reader Scott Brophy of Wisconsin. His circular-saw cutting guide caught the attention of our technical editors, so we incorporated a simplified version of that feature into our model cutting table, then added an easel (which swings out to become a workbench), two tool storage bins, a large pegboard, and a set of lumber racks for strips and full-size sheets.

The best part is that the whole affair is only 2 feet deep when closed, yet its 8 3/4-foot length permits entire sheets of paneling or plywood to lie flat on the worktable whether it's in the upright or the horizontal position. What's more, the clamp-on cutting fence provides a sturdy guide when you're sawing and can be situated just about any way it's needed, though you may prefer to limit your cutting activity to the center few inches of the table to preserve the working surface on either side. (As an alternative, you can place spacer strips under the work and carefully set the blade depth to avoid gouging the wood.)

Finally, the folded-up table has enough clearance behind it to allow the pegboard to easily accommodate all sorts of hand tools. Larger power tools can be stored in the swing-open bins below. Wood stock — from trim molding to entire panels — fits safely and unobtrusively in the almost foot-wide racks at the back.

Our shop staffers took special care to make sure this project could be duplicated by folks who have few tools. Though access to a table saw would ease the burden of making some of the angled joints, no cut is beyond the capacity of a circular saw, a coping blade, or — in a pinch — a hole saw fixed to an electric drill. Simple butt joints are used almost exclusively, and the framing members are fastened together with nails and glue, rather than screws.

You'll notice from our Worktable Assembly Diagram that the table swings out from the frame on a sliding dowel hinge pin that rides in slots cut into two guide boards. Since a 3/4" sheet of plywood packs some weight, we devised a booster made from elastic shock cords to help pull the load upward when the table's being closed. This tensioner, rope, and pulley system is completely contained at the frame's inner edges and doesn't interfere with tools or the use of the table in either position.

To some do-it-yourselfers, the bottom line is a project's total cost. At just about $100 worth of new materials, this one may be a tad steep. But to other folks — particularly those industrious tinkerers who'll gladly swap dollars for square feet of usable work area — our homebuilt hybrid might be a dream come true.


Previous | 1 | 2 | Next






Post a comment below.

 

Russell Morris
12/13/2012 12:29:24 AM
This project seems like a very good idea. Problem is, there are no design plans, material lists or anything. Without this, it would be almost like trying to make it all up with guess work and trial and error. (Although that is the way I do most things anyway!!!!) A basic plan would be greatly appreciated, and should be part of any similar articles like this in the future.

Art B
12/12/2012 7:27:03 PM
I think I can do this! I would have liked a supply list for the entire project. If I make one, I will share the list.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.