How to Make Concrete Sculptures For Profit

Learn how one reader started a thriving business in making and selling concrete sculptures. Information includes a concrete recipe, what kinds of concrete molds to buy and advice for selling the product.
By Jim White
May/June 1982
Add to My MSN

Mixing sand, cement, gravel, and water in a wheelbarrow economically!
PHOTO: JIM WHITE
Slideshow


Content Tools

Related Content

Video Demo: How to Make Tofu

Watch this video tutorial on how to make tofu.

What Non-food Items Do You Buy Organic?

There are thousands of organic products available today, and they're not limited to food. Tell us wh...

Make Your Own Fire Pit Using Concrete Tree Rings

This low-cost, easy-to-assemble fire pit from Instructables is made with concrete tree rings and roc...

Lithuanian Radishes

A Lithuanian farmer's market seller displays sculpted red radishes with faces!

I've never suffered from a lack of creative ideas. In fact, you might say that I've got plenty of notions. Unfortunately, my brainstorms don't often pay off. I knew my luck had changed, though, when I encountered a classified ad that began "Turn Concrete Into Gold." The mere mention of the precious metal was enough to grab my interest. I read on, and discovered that the ad concerned materials and instructions to be used in making concrete lawn ornaments. "What the hey," I said to myself, and ordered the information booklet.

At the time, I knew little about concrete other than that it was heavy and made fine patios and driveways. But I had noticed that it was composed of sand, gravel, cement and water. Sand — I figured — could be gathered free along riverbeds, gravel could be easily (and inexpensively) bought from local outlets and cement ran only about $7.00 for a 94-pound bag of Portland's finest. Water was as close as the backyard hose, and it looked as though I might be able to start out in business without spending much money at all!

Adapting Plans

 

After studying the booklet, I chose two designs: a discreet Grecian urn, about 12 inches high, that required a four-piece mold (listing for $100) and a hexagonal stepping stone that could be poured in a two-part hinged mold ($115). To this $215 investment, I added $14 for two quarts of a specially formulated paint to cover the interior surfaces of the molds. (This proved to be a worthwhile expense: The paint protects the forms from constant contact with the abrasive concrete mix and with proper care — which includes cleaning and oiling after each use — I believe the lifetime of my molds can be extended indefinitely.)

Since my initial excursion into the field, I've learned that there are several other types of molds besides the cast aluminum forms I purchased. Some are made from latex and others are fiberglass. Despite my initial ignorance, though, I believe I wound up with the best possible equipment. Latex molds are very short-lived and hardly worth the price. Fiberglass, on the other hand, is sturdy — but the details of complex shapes tend to blur out. Therefore, although cast aluminum is the most expensive to begin with, it's by far the most practical. If you expect to sell quality items (and why bother getting involved in making any product if you can't be proud of it?), you'll need superior molds to make them.

 

How to Stir Concrete

 

Well, maybe somebody could do it, but I never had any success with that method. I eventually settled for the old reliable hoe-and-wheelbarrow routine, and have been using it ever since. It may take a good bit of muscle, but it requires very little out-of-pocket cash!

 

A Recipe For Concrete

 

To make a sturdier product, you can add "pea gravel," but there's no standard amount required. Whatever your recipe, though, it's important to keep the sand pile wet during the preparation. Dry sand in the mix will inevitably lead to air holes in the finished product.

Once the poured concrete has hardened, the ornament can be removed from its mold. It'll be quite delicate and unstable at this stage, however, and must be handled with great care. Soak it regularly with water for a minimum of three days, which will allow the process of bonding to occur. Without this treatment, the concrete will be brittle and might well fall apart after a short time.

 

Selling Concrete Sculptures

 

The key to selling almost any product, of course, is to let people know that it's available. You won't need to hook up with a retail outlet to market your wares. Simply display some samples in your front yard and make neat, attractive signs that are visible from the street. Put an ad in your local newspaper, too, and be sure to include your phone number and, if possible, a photograph of your work.

It's important, too, that your signs and ads reflect the fine quality of your handicrafts. Remember, a messy advertisement will make a potential customer assume that your concrete ornaments will be messy as well.

The income that your creations can bring in will vary, depending on the cost of materials in your area and the time and labor required for the design in question. For the sake of example, though, here are some of my typical price tags: In 1981 I charged $8.50 for the Grecian urn, $16 for a rustic planter (its mold set me back $130), $50 for a two-piece birdbath (the pair of molds ran $240 and $275 respectively) and $12.50 for a statue of St. Francis of Assisi (which required a $300 form).

When you consider that the cost of the molds is a one-time outlay and that raw materials are relatively inexpensive, the idea of "turning concrete into gold" isn't so farfetched after all!


Previous | 1 | 2 | Next






Post a comment below.

 

alisha Oloughlin
4/20/2013 4:07:31 AM
Can anyone recommend a good, detailed book or instructional booklet to get started on casting concrete sculptures? Thanks in advance.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.