A Collapsible Cardboard Pet Carrier

It's not suitable for every occasion, but when you have to transport a pet short distances this homemade cardboard pet carrier is the right tool for the job.
By Elaine Benson
May/June 1983
Add to My MSN

The finished collapsible cardboard pet carrier, with occupant.
Photo by Elaine Benson


Content Tools

Related Content

The Wedding

A break from usual blogs to share the celebration of my daughter's wedding.

Why Having Pets Makes Us More Human

Through all of the tears and the heartbreak, I have found that having a pet makes us more human. Ple...

Osage Orange: A Wood for All Seasons

Hedge (a.k.a. Osage orange, a.k.a. Bodark, a.k.a. horseapple) is a thorny problem, but also a remark...

National Animal Shelter Appreciation Week

This week is the 12th annual National Animal Shelter Appreciation Week.

Anyone who's ever tried to transport a sick or wounded animal in a small automobile can fully appreciate the usefulness of a pet carrier. However, because such a device is likely to be needed only infrequently, many folks are reluctant to acquire one (after all, the cages can be expensive to buy and bulky to store). Well, here's a solution to that problem! The carryall described below is a collapsible cardboard pet carrier — it can be disassembled and folded flat for easy storage, and is lightweight, inexpensive, and easy to build.

The "pet case" is constructed from the sort of cardboard that has a single layer of corrugation between two face veneers. (The best source of this material is probably a large, discarded box, such as those that major appliances are delivered in. This container will provide the flat side sheets you'll need to cut out the "pattern pieces" of your toter.)

The carrier is held together by ten 1 1/4"-long, two-pronged brass paper fasteners, which are available at office supply stores. Other necessary tools and materials include a utility razor-knife; a pencil; a ruler; a 45° drafter's triangle; a carpenter's square; a sharp-pointed awl; a blunt-pointed tool of some sort; and white glue.

Putting It All Together

To begin, draw each of the pieces illustrated in my Pet Carrier Assembly Diagram on the cardboard, enlisting the aid of the ruler, triangle, and carpenter's square where necessary. A solid line on the plan indicates a cut all the way through the cardboard (use your utility razor-knife). A dotted line, on the other hand, indicates a fold (just crease the line with a blunt-pointed tool until the cardboard folds easily along that mark).

When the cuts and creases are made, punch holes for the brass fasteners on the end panel piece and the handle strip. Use the sharp-pointed awl. (Delay making the holes in the side panel piece—as well as the handle cutouts—until after assembly of the structure. Your doing so will allow you to use the cutouts and fastener holes in the other pieces as positioning guides.)

Now, using the white glue, attach half of the handle strip to one of the handle sections on the side panel piece, in such a way that the handle strip will be on the outside of both handle sections of the side panel piece. After the strip has dried in place, you can fold the unit into its assembled form by putting the side panel piece on top of the end panel section and creasing the sides and ends upward. Then insert the tabs through the slots and fold the handle strip over. [EDITOR'S NOTE. You may decide instead to keep the handle strip separate from the carrier and attach it to the side panel flaps with nuts and bolts each time you use it. This procedure should give the carrier some additional strength.] 

Once that's done, it's time to make fastener holes in the side panels. Use the awl to punch through the existing holes. Next, with the handle strip as a guide, mark the location for the handle slots on the side panels and cut these openings.

Complete your pet carrier by inserting the brass fasteners through the appropriate holes, and folding their ends back to secure the assembly. The unit can be opened or closed by manipulating four of the brass fasteners (two from the side tabs and two from along the handle strip). Before you begin toting your pets to and fro, though, you may decide to decorate the box's exterior with latex flat or semigloss paint.

Naturally, this device isn't recommended for use as a long-term storage facility for pets, and it won't be accepted as a regulation "crate" if you need to subject your animal friend to air travel, either. But for those quick but necessary trips to the vet or kennel, this portable case works as well as any plastic or metal store-bought carrier ... and most likely at a fraction of the cost!


Previous | 1 | 2 | Next






Post a comment below.

 

hhunt
1/15/2009 2:47:47 PM
The project illustration is in the Image Gallery under Article Tools at the top of the article. Click on it once to enlarge. - Mother

DanM_1
1/15/2009 2:42:01 PM
I looked at your article for a DIY cardboard cat carrier but could not find the drawing/plan mentioned. Is there a way to see and print plans from your website?








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.