Retro patio furniture never goes out of style. The wooden lawn chair and retro chaise lounge fit the decor of any patio, porch or backyard.
Use this template as a guide for cutting the sides and backrest supports of the wooden lawn chair. Each square on the template represents a 1-inch-by-1-inch square.
Photo courtesy Will Shelton
Retro patio furniture never goes out of style. "Retro," in this case, is a term applied to contemporary items that incorporate design elements from the 1930s through the '60s, before design took a turn toward cinder stone architecture and avocado appliances. Like malt shops and sock hops, retro is pure Americana. The wooden lawn chair and retro chaise lounge featured in this article are heavily influenced by 1960's design concepts. They are fun, functional, and easy to build. So, what are you waiting for? Who knows? Maybe Elvis will come for a visit. Get out your saber saw and crank up the rock 'n' roll, but don't get any sawdust on your blue suede shoes.
You can also download PDFs of the plans: Wooden Lawn Chair Plans, Wooden Lawn Chair and Chaise Lounge Plans 1 (Illustrations A and B) and Chaise Lounge Plans 2 (Illustration C).
• Create a 1-inch-by-1-inch grid pattern on one of the 8-foot redwood 2-by-12s. Recreate the curves full scale on the board.
• Cut out the shape using a saber saw.
• Use the cut-out shape as a template and trace the shape on the remaining 8-foot 2-by-12 and cut it out.
• Clamp the two frame pieces together and refine the curves with a wood rasp to make both sides identical. (Note: A good wood rasp is well worth the price. Choose one that has a rough and fine tooth flat on one side and a rough and fine convex tooth on the other.)
• With the two sides still clamped together, drill all the holes, making sure that they're perpendicular to the surface.
• Sand the redwood to a desired smoothness.
Joining the Frame Pieces
• Cut four 1-inch hardwood dowels to exactly 24 inches. These are the cross-brace dowels.
• Cut all of the seat slats to 24 inches long. You will need 20 to 24 slats depending on your spacing.
• Coming in 1 inch from each side, drill and countersink the two mounting holes in each slat end.
• Sand the top edges to a quarter-inch radius.
• Use eight of the slats to evenly space the frame pieces (four on top, four on the bottom). Temporarily screw them in place.
• With the frame pieces now spaced exactly 24 inches apart and parallel to each other, epoxy the four cross-brace dowels in place.
• After the epoxy has cured, screw on all of the seat slats. Use one of the slats for a spacer.
• Cut out the four backrest pieces from the boards. Make the contours match just as you did the frame pieces.
• Measure the distance between the frame pieces.
• Cut 10 to 12 backrest slat pieces to the dimension just taken but make them an eighth inch shorter: The backrest sides must fit inside the frame pieces. Drill, countersink the mounting holes, and sand the quarter-inch radius just as you did the seat slats.
• Drill all of the holes for both lag bolts and hardwood dowel.
• Screw all of the backrest slats in place (10 to 12 required).
• Attach the backrest support arms to the backrest using carriage bolts.
• Install the backrest using lag bolts.
• Epoxy the support arm dowel. Ensure the spacing is consistent.
Applying a Finish
• To preserve the wood, brush on a quality varnish or penetrating wood preservative.
• Stand the feet in a tray containing a penetrating epoxy until sufficient liquid has been absorbed by the wood. This will keep the most vulnerable part of the wood from rotting.
• Create a 1-inch-by-1-inch grid pattern on a sheet of three-eighths-inch plywood.
• Recreate the curves full scale on the grid.
• Cut out the shape using a saber saw.
• Use the cut-out shapes as templates and trace the outlines on one more sheet of three-eighths-inch plywood and four sheets of three-quarter-inch redwood. Drill an eighth-inch pilot hole in all of the dowel holes on all of the pieces. Construct the left and right frames by gluing all of the pieces together using epoxy. Put eighth-inch dowels through the pilot holes to line up the pieces.
• After the epoxy has cured, clamp the two frames together and refine all the curves making both sides identical.
• Drill all of the dowel holes with the frames clamped together using a 1-inch spade bit or hole saw.
• Sand smooth where necessary.
• Epoxy and screw the backrest and cleats into position on their frames.
• Cut five each 1-inch hardwood dowels to an exact length of 24 inches for the cross-braces.
• Cut 20 seat slats to a length of 24 inches. Cut four to a length of 22 inches. Cut 15 slats for the backrest 22 inches long.
• Drill and countersink two holes in each end.
• Sand the top edge to a quarter-inch radius. Screw the four 22-inch cleat seat slats in place. This will provide a resting place for the slats.
• Screw the top two backrest slats in place.
• Screw the last two seat slats in place.
• Epoxy all of the dowels in place ensuring that the frames are exactly parallel.
• After the epoxy has cured, screw on all of the remaining slats.
Discover a dazzling array of workshops and lectures designed to get you further down the path to independence and self-reliance.LEARN MORE