THE SALTER RD-7000 WIND TURBINE
(Page 2 of 2)
"The real secret of this design," says Salter, "is its
simplicity. The rotors run downwind of the machine's pivot
point. That eliminates the need for a tail vane and cuts
thirty to forty bucks off the cost of the windplant.
RELATED CONTENT
A Plowboy Interview with David Wright, a designer of sun tempered and passive solar homes....
A Plowboy Interview with Big Bill Delp, manufacturer of the fastest and most homestead-sized hydroe...
Finally, an improved design for earth sheltered homes that eliminates the drawbacks of conventional...
Malcolm Wells says underground homes protect and preserve the Earth’s surface....
Our rim drive turns the generator 1,250 to 1,375 rpm in a
25 mph wind without costly gears. And the RD-7000's damping
device which is no more complicated than a door closer just
kind of lets the whole rig lay over further and further
whenever the speed of the wind increases to a more and more
dangerous level. This decreases the area of the rotors
exposed to the gale in a very straight forward and
inexpensive manner. It's ideas like these that should allow
us to install our wind turbine-less batteries-at a price of
about $450 per kilowatt."
Patents are pending on the RD-7000 and the prototype unit
is still being tested. Which is to say that the Salter
windplant probably won't be on the market for at least
another two years. But that doesn't stop it from being a
very interesting concept right now!.
Page:
<< Previous 1 | 2 |