Build This Bread Slicer/ Cutting Board/ Serving Tray
A Mother's Mini-Project, building your own bread slicer, cutting board.
I love my wife's homemade bread but, for the life of me,
I've never been able to cut it into straight and even
slices. Never, that is, until I hit upon the idea for the
combination bread slicer/ cutting board/serving tray you
see here. Now I can zip off perfect slices every time ...
even paper-thin ones!
RELATED CONTENT
The recipe for Essene sprouted grain bread is easy. Learn how to sprout grains for sprouted flour, ...
Make a Spiral Slicer
January/February 1982
Issue # 73 - January/February 1982
Yes, there's ...
How to use a computer bulletin board service, including background, the basics, what it can do for ...
This home business can cut people's taxes, beautify the land, recycle and earn the owner more than ...
My little invention works on the same principle as a
carpenter's miter box (as a matter of fact, I got the idea
while watching a carpenter friend cut some miter joints).
The only difference is that my device was made specifically
to handle delicious homemade loaves of bread. Just slide a
loaf into place, position the blade of a long, sharp knife
in the slots ... and you can't help but cut straight and
true.
And?happy surprise!?although this gizmo was designed for
bread alone ... it's also ideal for eggplant, squash,
cheese, or almost any other sliceable food that'll fit into
it.
The whole slicer can be made from one piece of wood
measuring 3/4" X 6" X 54". As you can see, the short plank
Is cut into three 18"-long lengths ... two of which are
shaped as shown (for sides) before being fastened to the
third (which forms the slicer's bottom).
Feel free to change the shape of the sides shown here if
you think you have another pattern in mind that you like
better. Whatever design you decide to use, though, you'll
probably find it easiest to put the two pieces of wood
together and cut out and slot both sides at the same time.
(And those slots, of course, should be cut down far enough
so that?on assembly?they'll come out just even with the
base's top surface.)