LOW-BUDGET BULB CHANGERS
(Page 2 of 2)
In any case, before you fasten the suction tip in place,
install the connector to the end of the hose and then press
it into the socket in back of the cup. With this done, you
can feed the free end of the hose through the length of PVC
pipe and let it extend out the open end.
Once the suction cup is installed, changing a spotlight
takes just a few seconds. You must first place the rubber
cup against the bulb's face, then establish a grip by
sucking slightly on the tube as if it were a straw.
Maintaining the vacuum (either by folding and pinching the
tube or by using the clip from a hot water bottle), turn
the tool's han dle to remove the bulb. (Replacing the
light, of course, is simply a matter of reversing the
procedure.)
These homemade work savers are indeed changes for the
better (especially considering their nonconductive handles)
. . . and, after using them, we think you'll wonder why you
ever even considered climbing a stepladder.
RELATED CONTENT
How to gather willow, tools needed for the job, willow chair design and how to market the chairs....
Chart details various brands and offers a performance comparison....
My ""Truss-Worthy"" Chairs July/August 1986 From Mother No. 90 If you thought only seasoned woodwor...
Easy to Make ""Truss-Worthy"" Chairs November/December 1984
If you thought that bui...
Page:
<< Previous 1 | 2 |