Feedback on Handsplit shakes
Here's additional information for others who have found themselves unable to split shakes using Simonson's technique, or unable to buy high quality timbers for only a few bucks apiece.
July/August 1974
By Howard Pearson
I picked up the November 1973 issue of MOTHER at a friend's cabin yesterday and began scanning it . . . as I usually do any time I find an unguarded MOTHER lying around. Robert Simonson's article, "The Froe and You: How to Make Hand-split Shakes", immediately engrossed me. For the last three years I've lived in the rain forest of the Olympic Peninsula in Washington State and derived my entire income from working in cedar salvage. I've done everything from cutting cedar shake and shingle blocks to handsplitting tapered shakes.
RELATED CONTENT
Ever admire an old house covered with weathered shakes...those long shingles old-timers used to spl...
With just a mallet, a frow and a few other tooks, you can craft wooden shakes for your roof....
Sandhill crane photo and a quote by Aldo Leopold....
Eagle and Bear in British Columbia build a pole barn....
As Simonson suggests, handsplitting shakes or boards is, indeed, the most inexpensive way of roofing and covering walls from downed timber . . . as long as you have a cheap source of material. Also, the axe, saw and other tools needed to cut shakes will continue to be useful around the farm long after they've served their initial purpose. Still, I found some of Simonson's remarks to be misleading and incomplete.
Handsplitting shakes (or "tapers" as they're also called) is a relatively easy task when you're cutting high-quality, straight-grained wood . . . but finding such timber free for the asking or at the $3.00 to $4.00 price that Simonson quoted just doesn't happen. (My experience has been mostly with cedar and spruce—so I'm speaking of shakes coming from these woods—but cedar has by far the best tapering qualities of any timber. It also has the longest life span due to the natural preservatives in the cedar wood).
Unless you happen to be a fortunate soul with your own cedar forest right out the back door of your homestead, you'll discover that "stumpage"—the right to cut timber in a certain area—is darn hard to get. A year or two ago, it was a snap to purchase a few windfalls from the state or the U.S. Forest Service. But small sales are almost impossible to get today . . . due both to government policy changes and to an increase in stumpage rates as the market price of cedar continues to rise. Folks can forget about the $50.00/1,000 board feet (about 1-1/3 cords of wood) that was the average stumpage rate in years past. Most shake mills today are paying $140 to $150 per cord of cedar blocks. (The high prices being paid for cedar, coupled with the fact that there is too much government forest land to police, makes poaching a lucrative endeavor in my region. But the punishment is severe for those unfortunates who get caught.)
