A Timber-frame Woodshed
From Vermont high country, build a shed to last 200 years.
August/September 1995
By John Vivian
 |
The best sheds hae full open fronts for easy access, not floors to trip over or low roofs to bump a head on.
|
Here is a woodshed from real wood-burner's country-the ski mountains of Vermont-where city dwellers can find a few days' respite from smog, traffic, and the rat race in the crisp mountain air of places that have invigorating names like Mt. Snow, Suicide Six, Mad River Glen, and Smuggler's Notch. Days are for hurtling through fresh powder on mile-long downhill runs, and evenings are for nursing sore muscles and a cool drink in front of a roaring wood fire.
RELATED CONTENT
Can You Own the Land and Not the Trees? August/September 1999 Issue #175 - August/September 1999 Wh...
There's a new lumbering technique afoot that combines using and caring for the woods....
Using a timber-frame building method can be an easy and inexpensive way to construct a building. Ma...
Three business partners created Wild Rose Timberworks over 15 years ago based upon shared values. D...
Wood fires are as much a part of the life as the snow itself, and hundreds of cords of hardwood are burned each season (most of it in free-breathing/freestanding metal fireplaces that radiate heat well, but burn clean-although the wood smog that chokes inversion-prone Western ski areas in Colorado is never a problem in the free-flowing air of Vermont's Green Mountains.)
The woodsheds that help make the evenings glow and crackle must be filled by local woodsmen as fast as they are emptied by vacationers, and they are marvelously designed for the use. The best have full-open fronts for easy access, no floors to trip over or low roofs to bump a head on. They are not so deep that either loader or unloader has to step in more than one pace. Roofs are steep enough in back to shed the heaviest snowfall and have a front overhang that is so sharply-pitched it will never collect snow to avalanche off and dump down the back of a wood gatherer's neck ...and that juts out just far enough to keep rain or snow off the wood.
Here is how to build your own Vermont-ski-country woodshed. Dimensions and materials are given for 1 1/2 cord, 2-, 3-, and 4-cord capacities. When empty in the summer, any size can serve to store the garden tools or mower. Add a folding shelf in back and use it as a potting shed. Or, add a floor, frame and close in the front, cut door and window openings and you have a garden house, work shed, or playhouse for the kids.
Best of all, the shed is timber framedbuilt from square timbers with woodplank siding rather than being "stick-built" from scrawny little two-bys and plywood that demands precision measurement and must be designed in four-foot increments to avoid endless ripping of awkward 4' x 8' plywood sheets.
You can build the frame by simple butt nailing or you can enjoy the challenge of building half-lap, notched, or full mortise-and-tenon joints. Peg the joints together if you like. Side with clapboards or shingles to match the house, or make a mini-barn with rough-sawn board and batten siding.
Plan
First, decide how large a shed you need. Fuel wood is distributed by the cord: 128 cubic feet that is traditionally defined as an eight-foot-long, four-foot-high pile of four-foot-long logs as stacked in the woods by old-time ax men. If you buy wood or haul it from your own woodlot one cord at a time, the one-and-a-half-cord model is perfect; the extra half-cord gives you plenty of fuel while you wait for a 1-cord refill. The footprint of this shed is only 9 x 5 feet. You can fit it in alongside the front drive or anywhere in the yard that's most handy for both delivery and daily use. With a length of oak trunk for a chopping block to one side, the whole installation takes up only 70 or 80 square feet.
Page: 1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
Next >>