DIY

Hits and misses of DIY projects, both big and small.

Add to My MSN

Refinishing Wood Stairs

5/25/2012 2:48:00 PM

Tags: refinishing stairs, stairs and railings, stair runners, stair railing, Steve Maxwell

carvingstairs 

 Renewing old wooden stairs to their former glory is a lot of work, but former glory is definitely worth aiming for if you like the look and patina of old wood. Here's how to do it.

Begin by vacuuming your stairs clean, then remove the bulk of the old varnish with a liquid stripper. If your stairs are painted, you've almost certainly got lead to deal with, and that's another story. Lead paint requires special safety precautions. For stripping varnish, things are simpler. I find citrus-based formulations work well. Next, you'll need to do sanding and it's going to take time and the right kind of tools.

Start work with a 5" random orbit sander spinning a 120-grit disc on open areas of the stairs. You'll need to switch to a detail sander to get into the corners. These tools are made by a number of different manufacturers, and they all include a triangular head designed to reach into tight spots. With all the close-quarters sanding you'll need to do, it makes sense to buy one of these tools rather than renting. After sanding all areas with a 120-grit abrasive, do it again with finer, 180-grit, then vacuum everything and prepare for refinishing.

The type of finishing product you choose is critical, and I definitely do not recommend the approach typically used to finish floors. This is a combination of stain and film-forming urethane, and although it looks great when new, it looks quite bad when the surface starts to wear from foot traffic. And the only way to restore it completely is with another horrendous sanding job -- something you'll never want to do again.

This is why you should consider finishing your stairs with oil. I've recommended it to many homeowners and used it personally. Initial application involves brushing on and wiping off four or five coats of oil. This seals the wood and offers a moderate amount of protection. As foot traffic inevitably begins to create visible wear, wipe on another coat or two of oil. The stairs will look as good as new. Renewing a stained and urethaned finish flawlessly is nearly impossible, and ease of renewal is why I like oil so much.

If you simply want to protect the wood without additional color, use polymerized tung oil or wipe-on polyurethane. If you'd like to darken the wood, choose a dark oil. The more coats you apply, the darker the colour gets.

Want a personalized video answer to your home improvement and homesteading question? Send me your question at www.stevemaxwell.ca/ask-steve


Contributing Editor Steve Maxwell has been helping people renovate, build and maintain their homes for more than two decades. “Canada’s Handiest Man” is an award-winning home improvement authority and woodworking expert. Contact him by visiting his website and the blog, Maxwell’s House. You also can follow him on Twitter, like him on Facebook and find him on . 



Related Content

Zero-VOC Me

Environmental journalist Simran Sethi goes through the process of rejuvenating her hardwood floors, ...

Another Building Aid From Mother

Finding a company from an advertisement in Mother Earth News and how it benefited us. .

11 Natural Phenomena to See This Autumn

Some of the most amazing natural phenomena to see this autumn. Try to check them out in person if yo...

Learn How To Finish Wood With Waterbased Stains

See a video on how Steve finishes interior wood with waterbased stains, and why you might want to th...

Content Tools




Post a comment below.

 

Geraint Jone
9/15/2014 4:32:52 AM
Floral staircase designs looks so pretty & gives a special touch to the drawing room!! Even the color used is really nice. http://www.pearstairs.co.uk/

Mona Donaldson
1/3/2013 9:14:18 PM
FYI,... l have used what mother nature has readily made itself available to me,.I ave 3 different types of walnut trees on my property, and l put a big plastic jug down and pick up all the fallin walnuts l can into the jug, let them sit and pretty much rot in the jud, then l take all the (juice) of the rotting walnuts and jar it,. that works great for staining. Then l use a light brushing of fresh bees wax and rub it onto the wood for protection.just sayin.

Dawn Pfahl
6/23/2012 6:28:41 PM
What sanding tool would work best for the railings? I'd love to refinish our stairs and we have an orbital sander and detail tool already but our nice square banisters and detailed hand rails are going to be very difficult to sand... I suppose hand-sanding is the best way to deal with the smaller corners and crevices? Thanks for the tips on oil, too. What's your favorite oil to use when finishing stairs? Ours are a lovely dark red oak and I want to bring the color out.







Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.