DIY

Hits and misses of DIY projects, both big and small.

Add to My MSN

DIY Rotisserie Spit

3/22/2013 2:53:10 PM

Tags: rotisserie spit, diy rotisserie, solar powered

This article originally appeared in Make Vol. 33 and is reposted with permission from the author, Saul Griffith. 

Not only do I enjoy making things, I also love making food, so any opportunity that combines both is hard to pass up. I decided to do what I’d been hoping to do for years: cook an entire animal on a spit.Friends of mine were getting married, and being the beautiful and unusual people they are, planned a potluck wedding. I decided to do what I’d been hoping to do for years: cook an entire animal on a spit. My wife and I had a small lamb and pig both spit-roasted at our wedding and it was a culinary highlight. How hard could it be to do myself? 

A few friends volunteered to help (thanks Pete Lynn, Dan Benoit, Joe Brock, and infinitely Mose O’Griffin). At the local farmer’s market I met the lovely people from Fatted Calf, a San Francisco charcuterie. They were delighted to supply me with a lamb, and also recommended a great book, The River Cottage Meat Book, that included directions for making a spit and cooking on it.

It was the Thursday evening before the wedding when I went to pick up the lamb. The store was full of people buying sausage or some prosciutto. The store went dead quiet as the butcher, having just completed salting and preparing “the beast,” brought it out slung over his shoulder. I think everyone in the shop came to me with some comment or story of shared excitement, jealousy, or encouragement. I knew at this point that despite having no idea what I was doing, this particular cooking experience was the type of making that brings communities and people together in a social experience.

That evening we elected to build the rotisserie spit that I thought would be the simplest, most easily transported, and easiest to store. 

Materials

Sheet metal for the fire pans and drippings trough. We used a 4 inch by 8 inch sheet of 16-gauge mild steel. 

3 Metal rods or pipes to hold the pans and trough together 

2 Adjustable sawhorses to support the rotisserie, height-adjustable for temperature control (good idea, Dan) 

Make Photo 3Steel pipe, Schedule 40, 1½ inch diameter, 10 inch length for the spit 

Baling wire to hold the roast on 

Windshield wiper motor, high torque, low speed to drive the spit 

Solar panel to power the rotisserie (thanks, Fenix International) 

Bicycle wheel to gear down the rotisserie speed 

Steel pipe flange fitting 

Scrap of wood or metal to adapt the flange to your bike wheel 

2 Eye bolts larger than pipe diameter 

Various wood screws, nails, kite string, etc. 

Build It 

1. Cut the sheet metal into three 8-feet-long pieces: two 18-inches-wide for the fire pans, and one 12-inches-wide for the drippings trough. Cut holes to thread the pipe through.Make Photo 2

2. Cut the metal pipes to size and assemble the 3 troughs. Bend the drippings trough deeply and the fire pans shallowly. 

3. Bolt the eye bolts to the top of the sawhorses. 

4. Drill and tap the flange to match the hole spacing of the disc brake tabs on the bike hub.

5. Connect the flange and hub/wheel to the Schedule 40 pipe. To adapt the flange to your disc brake or hub, drill a disc of wood or metal to match the hole patterns of both parts.

6. Improvise.

7 a.m. Wedding day — I get up, but have my 3-year-old son and 3-month-old puppy to look after. (My wife is baking the wedding cake.)

9 a.m. I’m now worried; I haven’t made progress on anything, and from reading the book I’m estimating a 6- or 7-hour cooking time with a 5 p.m. eating target. Mose arrives. Sigh of relief. 

9:05 We get the fire started in the 2 fire pans. We have enough old eucalyptus logs to cook a bunch of animals, even though it does consume a surprising amount of wood. Make Photo 4

9:15 Start preparing the animal itself; we decide to figure out how to spin the animal once it’s on the spit.

9:20 Read hilarious section of River Cottage Meat Book: “Let’s not be delicate here, the pole goes in the a**hole and out the mouth.” Learned that there is indeed nothing delicate about cooking a whole animal.

9:25 We use too much baling wire and my hands are bleeding, but the lamb is tied to the pole. All I did to prepare the pipe was drill some holes for pushing wire through. You should think a lot more about how to keep the lamb from rolling around. Systems with orthogonal spikes seem very popular.

9:45 Lamb goes onto the spit above the coals. We’re cooking at last. Seven hours until dinner; if everything goes according to plan we’ll have minutes to spare!

9:55 We attempt to drive the spit at a recommended 1 to 3 rpm by connecting solar cells through an inverter to produce 12V. There are problems with both the inverter and the drive mechanism.

10:05 Our friction drive made of a BMX bike peg against the bike tire doesn’t work well, and doesn’t give us enough gear reduction. The motor moves about 100 rpm, and the friction drive is only about 20:1.

10:20 Switch to using the battery of a 1959 dune buggy. This turns out to be a bad idea but is awfully fun.

10:30 Back to solar panels, and with the arrival of Joe Brock we have a new idea: a capstan drive. It works perfectly. Fortunately I have brought a splicing tool and some old kite string that makes an excellent belt. We just wrap a few turns of the string around the motor axle.

10:40 Everything now appears to be working. The lamb is moving at 2 to 3 rpm and the only thing to do now is tend the fire. And baste the animal. And drink.

4:40 p.m. Still basting and drinking, but it’s now time to go watch our friends get married. Quickly check the temperature with a meat thermometer: 140°F deep
in the thigh. Perfect.

5:10 They’re married! I’m ready to carve. So is Mose. People line up, and it’s done. I can’t believe 75 pounds of animal can disappear so quickly.

Sometimes making is solitary, sometimes it’s social. Both are beautiful things.



Related Content

Transformation Tuesday: A DIY Wreath Made of Burnt-Out Lightbulbs

Reuse burnt-out lightbulbs to make this adorable, unique DIY holiday wreath.

What home DIY or remodel project do you most want to do, but haven’t yet?

Home improvement stores offer free DIY classes. What project have you not started yet but dream of d...

Environmental Problems Are No Match for Human Ingenuity, Part 2

With the inventiveness of visionaries like Elon Musk, technological advances can help create a bette...

It’s Almost Time for the 2009 Solar Decathlon

Student teams prepare to compete in the U.S. Department of Energy hosted, fourth biyearly Solar Deca...

Content Tools




Post a comment below.

 

phillamb168
8/6/2013 11:25:53 AM

As a counter to karen.kornbau.3's comment, I'd like to say that I really appreciate this DIY. I have no interest in spending several hundred dollars on a rotisserie, and this seems like it would work just fine, for way less money, and be tons of fun. Now to figure out how to get pork knuckles strung up so I can do schweinshaxe.


karen.kornbau.3
5/28/2013 10:27:17 PM

very offensive picture. looks like a dog on the spit. I like Mother earth news, but if you want to roast animals, please do it in your own privacy. I personaly do not find it appatizing nor right.








Subscribe Today - Pay Now & Save 66% Off the Cover Price

First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
Country:
Email:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Lighten the Strain on the Earth and Your Budget

MOTHER EARTH NEWS is the guide to living — as one reader stated — “with little money and abundant happiness.” Every issue is an invaluable guide to leading a more sustainable life, covering ideas from fighting rising energy costs and protecting the environment to avoiding unnecessary spending on processed food. You’ll find tips for slashing heating bills; growing fresh, natural produce at home; and more. MOTHER EARTH NEWS helps you cut costs without sacrificing modern luxuries.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet’s natural resources while helping you conserve your financial resources. That’s why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.00 (USA only).

You may also use the Bill Me option and pay $17.00 for 6 issues.