Build a Log-splitting Table
(Page 2 of 2)
October/November 2002
By Norm Hicks
Another important factor in operator comfort is the height of the sputter beam. This can make or break the operation. especially if it is a rented sputter you have to work nonstop until the word is completely split. Years ago I worked with splitters that were just a few inches off the ground, which required me to kneel to work them. Finally I started running the splitter up onto concrete blocks to get the beam high enough for comfortable operation. Mow I have a pad made out of 2x12-inch lumber that raises the sputter off the ground 3 inches. This gives me a beam working height of 30 inches, which is just right for me. My- neighbor, who stands 6 feet 7 inches tall, needs a higher beam and splitter-table height. He suffered a sore hack this year from working with my setup.
RELATED CONTENT
Give your log (or any other) Home a House Log! July/August 1981 You house-log cover that's both att...
In the second wood-splitting contest, Mother's staff tested the Wood Popper 1, WOODOX, E-Z Split Lo...
Here's a portable, budget-stretching, easy-does-it logging technique....
IT'S EASY TO LEARN THE ""OLD-TIME"" SKILL OF RAIL-SPLITTING May/June 1977 by PAUL LEAF Nobody was m...
Whether you are splitting alone or with lots of help, the sputter table, and a ramp and pad to raise the beam to a comfortable working height, are a great assistance. For a small investment of time and money, you can build your own splitting table, work smatter and faster, and save your hack during wood-splitting season.
Log-splitting Table Plans
MATERIALS
4 LEGS (FOR A 30" HIGH TABLE): 2" X 6" X 37" (cAN ALL BE CUT FROM ONE 2" X 6" X 12")
2 SUPPORTS: 2" X 6" X 36"
2 RAILS: 1" X 8" X 42 1/2"
2 RAILS: 1" X 8" X 361/4"
1 TOP: 1/2" OR 3/4" X 37" X 38" PLYWOOD
Page:
<< Previous 1 | 2 |