Milking Stanchion
(Page 2 of 2)
BRACING: Screw the leg supports (C) to the
slide supports (F) using six 1!" screws in each. Attach the
legs (E) to the leg supports (C) and to the bottom (B) on
all four corners. Attach each leg using four 1 1/2" screws,
two in the top and two in the side.
RELATED CONTENT
Raw milk and your health. ...
Read on and learn why the goat is considered to be man's second best friend....
MOTHER reader Paul Niemi has also butchered a few goats in his day . . . and, while his methods clo...
Instructions for building a '«goat grabber.'...
TO ATTACH FRONT TO FLOOR: Attach the front
(A) to the bottom (B) using the L-brackets previously
installed on the front (A). Position brace (G) as shown in
the diagram and screw to the front (A) and the bottom (B)
flush with the far side of the stanchion.
If you'd like a restraint to confine your goat loosely to
the stanchion, attach screw eye (K) to the right side near
the bottom of the keyhole. Attach chain (J) to the screw
eye (K). Attach the screw hook on the left side of the
keyhole so you can fasten the chain loosely.
The Seat
MATERIALS
A. One 36" 1x12 (adjustable slide)
B. Two 16" 1x12s (sides)
C. One 16" 1x12 (top)
Mark and cut the two sides (B) as indicated on the diagram.
Attach adjustable slide (A) onto sides (B) 8 1/2" from the
bottom. Use three W screws on each side. Attach the top (C)
across the top of the sidepieces allowing 2" of overhang on
each. Attach with six 1 1/2" screws, three on each
side.
The Feed Box
MATERIALS
A. Two 13 1/2" 1x4s (front and back)
B. Two 12" 1x4s (sides)
C. One 15" 1x12 (bottom)
Two 4" L-brackets
Screw together the front and back (A) to the sides (B). Use
two 1 1/2" screws in each corner. Attach bottom (C) using
three 1 1/2 " screws per side. Attach L-brackets to the
bottom of the box, flush with outside edge. These will
later attach the feed box to the stanchion.
Mark and Janet homestead in northeastern Missouri where
Janet is a freelance writer and Mark works for the Missouri
Department of Transportation.
Page:
<< Previous 1 | 2 |