A Ladder That Levels the Field
(Page 4 of 4)
August/September 1996
By Robert L. Williams
If you want to make the levelers work also as extensions, cut boards 1.5 inches thick and as wide as the legs of the ladder. Drill holes as before, but this time you can drill them up to the third or fourth steps, if desired. Then, if you need a longer ladder, remove the bolts, slide the outside boards down to the desired distance, and install the bolts again. You can easily and safely add a foot or even two feet of extension to your ladder in this fashion.
RELATED CONTENT
Human-powered machines are great for the environment. They use no fossil fuels, plus they make some...
Solar expert Gary Reysa has been developing and testing DIY solar projects for the last nine years....
You can build an inexpensive DIY greenhouse from recycled window and storm doors. Add some plastic ...
The journey toward 100 mpg continues as MAX, our DIY car, gets ready for a new, more aerodynamic bo...
Lloyd Kahn’s home building books, including “Shelter,” “Home Work” and “Builders of the Pacific Coa...
The Uni-Ladder is complete and ready to use. If you need two ladders, simply remove the bolts from the brace pieces and take off the top piece. You now have separate straight ladders.
What does all this cost? We kept meticulous records, as we do for all of our do-it-yourself projects, and the cost of sawing the pine legs and oak steps was $2.43, and we had some boards left over for other projects. The quarter-inch bolts and screws cost us a total of $3.45, so we had a total of $5.88 tied up in our ladder.
As far as time is concerned, we worked about four solid hours on the ladder, but our time was extended because we stopped to write down notes and figure out easier ways of handling some of the trickier steps. And you wouldn't believe how long it took to train the cat to climb the ladder on cue.
Page:
<< Previous 1 |
2 |
3 | 4 |